$ 234.51 – $ 506.53
Article number | 6ES7138-4FA05-0AB0 |
ET200S, El-Mod., 4/8 F-DI, DC 24V | |
Supply voltage | |
Rated value (DC) | 24 V |
Encoder supply | |
Number of outputs | 2 |
Type of output voltage | min. L+ (-1.5 V) |
Short-circuit protection | Yes; Electronic (response threshold 0.7 A to 1.8 A) |
Output current | |
● Rated value | 300 mA |
● permissible range, lower limit | 0 mA |
● permissible range, upper limit | 300 mA |
Power loss | |
Power loss, typ. | 4 W |
Address area | |
Address space per module | |
● Inputs | 6 byte |
● Outputs | 4 byte |
Digital inputs | |
Number of digital inputs | 8; 8 (one-channel); 4 (two-channel) |
Input characteristic curve in accordance with IEC 61131, type 1 | Yes |
Input voltage | |
● Type of input voltage | DC |
● Rated value (DC) | 24 V |
Input current | |
● for signal “1”, typ. | 3.7 mA |
Input delay (for rated value of input voltage) | |
for standard inputs | |
— parameterizable | Yes |
— at “0” to “1”, min. | 0.3 ms |
— at “0” to “1”, max. | 17 ms |
— at “1” to “0”, min. | 0.3 ms |
— at “1” to “0”, max. | 17 ms |
Cable length | |
● shielded, max. | 500 m |
● unshielded, max. | 500 m |
Encoder | |
Connectable encoders | |
● 2-wire sensor | No |
— permissible quiescent current (2-wire sensor), max. | 0.6 mA; max. |
Interrupts/diagnostics/status information | |
Diagnostics function | Yes |
Alarms | |
● Diagnostic alarm | Yes |
Diagnoses | |
● Diagnostic information readable | Yes |
● Short-circuit | Yes |
Diagnostics indication LED | |
● Group error SF (red) | Yes |
● Status indicator digital input (green) | Yes |
Potential separation | |
Potential separation digital inputs | |
● between the channels | No |
● between the channels and backplane bus | Yes |
● Between the channels and load voltage L+ | No |
Standards, approvals, certificates | |
Highest safety class achievable in safety mode | |
● acc. to EN 954 | 4 |
● Performance level according to ISO 13849-1 | PLe |
● SIL acc. to IEC 61508 | SIL 2 (single-channel), SIL 3 (two-channel) |
Dimensions | |
Width | 30 mm |
Height | 81 mm |
Depth | 52 mm |
Weights | |
Weight, approx. | 78 g |
Article number | 6ES7138-4FB04-0AB0 |
ET200S, El-Mod., 4 F-DO, DC 24V/2A | |
Supply voltage | |
Load voltage L+ | |
● Rated value (DC) | 24 V |
● Reverse polarity protection | No |
Input current | |
From load voltage L+ (no load), typ. | 100 mA |
from backplane bus 3.3 V DC, max. | 28 mA |
Power loss | |
Power loss, typ. | 3.5 W |
Digital outputs | |
Type of digital output | Transistor |
Number of digital outputs | 4 |
Short-circuit protection | Yes |
Limitation of inductive shutdown voltage to | Typ. (2L+) -47 V |
Controlling a digital input | No |
Switching capacity of the outputs | |
● on lamp load, max. | 10 W |
Load resistance range | |
● lower limit | 12 Ω |
● upper limit | 1 kΩ |
Output voltage | |
● for signal “1”, min. | L+ (-2,0 V), current sourcing switch: L+ (-1,5 V), voltage drop on current sinking switch: max. 0.5 V |
Output current | |
● for signal “1” rated value | 2 A |
● for signal “1” permissible range, min. | 20 mA |
● for signal “1” permissible range, max. | 2.4 A |
● for signal “0” residual current, max. | 0.5 mA; Current-sourcing and current-sinking switches |
Parallel switching of two outputs | |
● for uprating | No |
● for redundant control of a load | No |
Switching frequency | |
● with resistive load, max. | 30 Hz; Symmetrical |
● with inductive load, max. | 0.1 Hz; Symmetrical |
● on lamp load, max. | 10 Hz; Symmetrical |
Total current of the outputs | |
● Current per module, max. | 6 A |
Total current of the outputs (per group) | |
horizontal installation | |
— up to 40 °C, max. | 6 A |
— up to 55 °C, max. | 5 A |
— up to 60 °C, max. | 4 A |
vertical installation | |
— up to 40 °C, max. | 4 A |
Cable length | |
● shielded, max. | 500 m |
● unshielded, max. | 500 m |
Interrupts/diagnostics/status information | |
Diagnostics function | Yes |
Diagnoses | |
● Wire-break | Yes |
● Short-circuit | Yes |
Diagnostics indication LED | |
● Group error SF (red) | Yes |
● Status indicator digital output (green) | Yes |
Potential separation | |
Potential separation digital outputs | |
● between the channels | No |
● between the channels and backplane bus | Yes |
● Between the channels and load voltage L+ | No |
Standards, approvals, certificates | |
Highest safety class achievable in safety mode | |
● acc. to EN 954 | 4 |
● Performance level according to ISO 13849-1 | PLe |
● SIL acc. to IEC 61508 | SIL 3 |
Dimensions | |
Width | 30 mm |
Height | 81 mm |
Depth | 52 mm |
Weights | |
Weight, approx. | 85 g |
Article number | 6ES7138-4FC01-0AB0 |
ET200S, El-Mod.,4 F-DI/3 F-DO, DC 24V/2A | |
Supply voltage | |
Rated value (DC) | 24 V |
Power loss | |
Power loss, typ. | 3.5 W |
Digital inputs | |
Number of digital inputs | 4 |
Input voltage | |
● Type of input voltage | DC |
Input current | |
● for signal “1”, typ. | 3.5 mA |
Standards, approvals, certificates | |
Highest safety class achievable in safety mode | |
● acc. to EN 954 | 3 |
● Performance level according to ISO 13849-1 | d |
● SIL acc. to IEC 61508 | 2 |
Dimensions | |
Width | 30 mm |
Height | 81 mm |
Depth | 52 mm |
Weight | N/A |
---|---|
Dimensions | N/A |
INOSAKI Limited
RM B 5/F Gaylord Comm,
Bldg 114-118 Lockhart Rd.
Hong Kong
INOSAKI Sdn. Bhd.
2-1-9, Ground Floor, One Square, Tingkat Mahsuri 1,
11900 Bayan Lepas, Penan
INOSAKI Pte. Ltd.
101 Upper Cross Street,
No. 06-17, People’s Park Centre,
Singapore (058357)