$ 408.25 – $ 438.52
The fail-safe ET 200SP modules can be used to implement the safety-related application requirements as an integrated part of the overall automation. The safety functions required for fail-safe operation are integrated in the modules. Communication with the fail-safe SIMATIC S7 CPUs is performed by means of PROFIsafe. The modules can be operated both in centralized and distributed configurations.
Article number | 6ES7136-6DB00-0CA0 | 6ES7136-6DC00-0CA0 |
ET 200SP, El-Mod., F-DQ 4xDC 24V/2A | ET 200SP, F-DQ 8x 24VDC/0.5A PP | |
General information | ||
Product type designation | F-DQ 4×24 V DC/2A HF | F-DQ 8×24 V DC/0.5 A PP HF |
Firmware version | ||
● FW update possible | Yes | |
usable BaseUnits | BU type A0 | BU type A0 |
Color code for module-specific color identification plate | CC02 | |
Product function | ||
● I&M data | Yes; I&M0 to I&M3 | Yes; I&M0 to I&M3 |
Engineering with | ||
● STEP 7 TIA Portal configurable/integrated from version | V12 | V14 SP1 with HSP 202 |
● STEP 7 configurable/integrated from version | V5.5 SP3 / – | V5.5 SP4 HF5 |
● PROFINET from GSD version/GSD revision | V2.31 | V2.31 |
Supply voltage | ||
Rated value (DC) | 24 V | 24 V |
permissible range, lower limit (DC) | 20.4 V | 19.2 V |
permissible range, upper limit (DC) | 28.8 V | 28.8 V |
Reverse polarity protection | Yes | Yes |
power supply according to NEC Class 2 required | No | No |
Input current | ||
Current consumption (rated value) | 75 mA; without load | 75 mA; without load |
Current consumption, max. | 21 mA; From the backplane bus | 21 mA; From the backplane bus |
output voltage / header | ||
Rated value (DC) | 24 V | 24 V |
Power | ||
Power available from the backplane bus | 70 mW | 70 mW |
Power loss | ||
Power loss, typ. | 4 W | 3 W |
Address area | ||
Address space per module | ||
● Inputs | 5 byte | 6 byte; 5 bytes non-RIOforFA; 6 bytes RIOforFA |
● Outputs | 5 byte | 6 byte; 5 bytes non-RIOforFA; 6 bytes RIOforFA |
Hardware configuration | ||
Automatic encoding | Yes | Yes |
● Electronic coding element type F | Yes | Yes |
Digital outputs | ||
Type of digital output | Transistor | Transistor |
Number of digital outputs | 4 | 8 |
Digital outputs, parameterizable | Yes | Yes |
Short-circuit protection | Yes | Yes |
● Response threshold, typ. | > 3.3 A | Min. 0.7 A |
Open-circuit detection | Yes | No |
● Response threshold, typ. | 8 mA | |
Overload protection | Yes | |
● Response threshold, typ. | 2.9 A | |
Limitation of inductive shutdown voltage to | Typ. -2x 47 V | Typ. -39 V |
Controlling a digital input | Yes | |
Switching capacity of the outputs | ||
● with resistive load, max. | 2 A | 0.5 A |
● on lamp load, max. | 10 W | 2 W |
Load resistance range | ||
● lower limit | 12 Ω | 48 Ω |
● upper limit | 2 000 Ω | 12 000 Ω |
Output voltage | ||
● for signal “1”, min. | 24 V; L+ (-0.5 V) | 24 V; L+ (-0.5 V) |
Output current | ||
● for signal “1” rated value | 2 A | 0.5 A |
● for signal “0” residual current, max. | 0.5 mA | 0.5 mA |
Switching frequency | ||
● with resistive load, max. | 30 Hz; Symmetrical | 30 Hz; Symmetrical |
● with inductive load, max. | 0.1 Hz; according to IEC 60947-5-1, DC-13, symmetrical | 0.1 Hz; according to IEC 60947-5-1, DC-13, symmetrical |
● with capacitive load, max. | 2 Hz; Symmetrical | |
● on lamp load, max. | 10 Hz; Symmetrical | 10 Hz; Symmetrical |
Total current of the outputs | ||
● Current per channel, max. | 2 A; note derating data in the manual | 0.5 A; note derating data in the manual |
● Current per module, max. | 6 A; note derating data in the manual | 3 A; note derating data in the manual |
Total current of the outputs (per module) | ||
horizontal installation | ||
— up to 40 °C, max. | 3 A | |
— up to 50 °C, max. | 2.5 A | |
— up to 60 °C, max. | 2 A | |
vertical installation | ||
— up to 50 °C, max. | 2 A | |
Cable length | ||
● shielded, max. | 1 000 m | 100 m |
● unshielded, max. | 500 m | 100 m |
Interrupts/diagnostics/status information | ||
Diagnostics function | Yes | Yes |
Substitute values connectable | No | No |
Alarms | ||
● Diagnostic alarm | Yes | Yes |
Diagnostics indication LED | ||
● RUN LED | Yes; green LED | Yes; green LED |
● ERROR LED | Yes; red LED | Yes; red LED |
● Monitoring of the supply voltage (PWR-LED) | Yes; green PWR LED | Yes; green PWR LED |
● Channel status display | Yes; green LED | Yes; green LED |
● for channel diagnostics | Yes; red LED | Yes; red LED |
● for module diagnostics | Yes; green/red DIAG LED | Yes; green/red DIAG LED |
Potential separation | ||
Potential separation channels | ||
● between the channels | No | No |
● between the channels and backplane bus | Yes | Yes |
● between the channels and the power supply of the electronics | No | No |
Isolation | ||
Isolation tested with | 707 V DC (type test) | 707 V DC (type test) |
Standards, approvals, certificates | ||
Suitable for safety functions | Yes | Yes |
Highest safety class achievable in safety mode | ||
● Performance level according to ISO 13849-1 | PLe | PLe |
● Category according to ISO 13849-1 | Cat. 4 | |
● SIL acc. to IEC 61508 | SIL 3 | SIL 3 |
Probability of failure (for service life of 20 years and repair time of 100 hours) | ||
— Low demand mode: PFDavg in accordance with SIL2 | < 2.00E-04 | |
— Low demand mode: PFDavg in accordance with SIL3 | < 2.00E-05 | < 6.00E-05 |
— High demand/continuous mode: PFH in accordance with SIL2 | < 1.00E-08 1/h | |
— High demand/continuous mode: PFH in accordance with SIL3 | < 1.00E-09 1/h | < 2.00E-09 1/h |
Ambient conditions | ||
Ambient temperature during operation | ||
● horizontal installation, min. | 0 °C | 0 °C |
● horizontal installation, max. | 60 °C | 60 °C |
● vertical installation, min. | 0 °C | 0 °C |
● vertical installation, max. | 50 °C | 50 °C |
Altitude during operation relating to sea level | ||
● Installation altitude above sea level, max. | 4 000 m; Restrictions for installation altitudes > 2 000 m, see manual | 4 000 m; with derating |
Dimensions | ||
Width | 15 mm | 15 mm |
Height | 73 mm | 73 mm |
Depth | 58 mm | 58 mm |
Weights | ||
Weight, approx. | 57 g | 48 g |
Weight | N/A |
---|---|
Dimensions | N/A |
INOSAKI Limited
RM B 5/F Gaylord Comm,
Bldg 114-118 Lockhart Rd.
Hong Kong
INOSAKI Sdn. Bhd.
2-1-9, Ground Floor, One Square, Tingkat Mahsuri 1,
11900 Bayan Lepas, Penan
INOSAKI Pte. Ltd.
101 Upper Cross Street,
No. 06-17, People’s Park Centre,
Singapore (058357)