Sale!

Festo 3629 Roller Lever Valve, 3/2 NC, M5, 80 l/min

Original price was: USD 53.82.Current price is: USD 47.06.

Direct mechanical 3/2 normally closed monostable valve with M5 ports, 80 l/min nominal flow, 16.5 N actuation force and −0.95 to 8 bar operating range.

Festo Mechanical And Hand Operated Valves

Festo R-3-M5 Roller Lever Valve

BrandFesto
Model IdentifierR-3-M5
Official Part Number3629

Technical Overview

The Festo R-3-M5 is a mechanically actuated roller lever valve with a 3/2 normally closed, monostable function. Its direct-operated poppet-seat design has a 2 mm nominal size and a standard nominal flow rate of 80 l/min. M5 pneumatic connections at ports 1 and 2 suit compact pneumatic signal circuits, while the specified operating pressure extends from −0.95 to 8 bar. The roller mechanism requires 16.5 N actuating force and the body mounts through holes. A 40 g die-cast-zinc housing, NBR seals and a −10 to +60 °C ambient range complete the documented mechanical configuration.

Direct mechanical roller lever valve with 3/2 normally closed monostable function, M5 ports, 80 l/min nominal flow and 16.5 N actuating force.

Key Features

  • Mechanically actuated roller lever
  • 3/2 normally closed, monostable valve function
  • Direct-operated poppet-seat design
  • 80 l/min standard nominal flow rate
  • 2 mm nominal size
  • M5 pneumatic ports 1 and 2
  • −0.95 to 8 bar operating pressure
  • 16.5 N actuating force and through-hole mounting
  • 40 g die-cast-zinc body with NBR seals
  • −10 to +60 °C ambient range

Convert roller contact into a compact 3/2 pneumatic control signal using direct mechanical actuation and M5 connections.

Technical Specification Matrix

ParameterValue
Valve function3/2-way, normally closed, monostable
Type of actuationMechanical
Standard nominal flow rate (standardised to DIN 1343)80 l/min
pneumatic working portM5
Operating pressure-0.95 bar...8 bar
DesignPoppet seat
Nominal size2 mm
Type of pilotingDirect
Explosion protectionZone 1 (ATEX); Zone 2 (ATEX); Zone 21 (ATEX); Zone 22 (ATEX)
Operating mediumCompressed air to ISO 8573-1:2010 [-:-:-]
Note on operating and pilot mediumLubricated operation possible (in which case lubricated operation will; always be required)
LABS (PWIS) conformityVDMA24364-B1/B2-L
Ambient temperature-10 °C...60 °C
Actuating force16.5 N
Physical Weight (kg)0.04
Type of mountingWith through-hole
Pneumatic connection, port 1M5
Pneumatic connection, port 2M5
Material sealsNBR
Material housingDie-cast zinc

Industrial Applications

1. Pneumatic End-Position Sequencing

A moving machine carriage reaches a roller lever positioned at its travel endpoint. Mechanical contact operates the direct 3/2 normally closed valve, providing a pneumatic switching event for the next stage of a pneumatic sequence. M5 connections and 80 l/min nominal flow characterize the compact signal interface, while the specified 16.5 N actuating force defines the roller-contact requirement.

Problem Solved

The roller converts a physical endpoint event into pneumatic switching, allowing the sequence to respond to mechanism position through a direct mechanical valve interface.

Roller actuation 3/2 NC monostable M5 ports

2. Workpiece-Contact Pneumatic Presence Signal

A fixture presents a workpiece against a roller lever to establish a pneumatic presence signal before a process step. This valve changes its normally closed 3/2 state through direct mechanical actuation, requiring no electrical coil supply. Its 16.5 N actuating force and through-hole mounting provide documented parameters for arranging the fixture contact and supporting the valve body.

Problem Solved

Mechanical contact gives the pneumatic circuit a workpiece-present switching event, addressing absent-part sequencing without requiring an electrical sensor output at the contact point.

16.5 N actuation Direct operation Through-hole mounting

3. Cam-Triggered Pneumatic Cycle Pulse

A rotating or translating cam contacts the roller during one part of a machine cycle. The direct mechanical 3/2 monostable valve supplies a switching interval tied to that contact, rather than a programmed electrical timing command. The 2 mm nominal size, M5 connections and 80 l/min nominal flow define the selected pneumatic signal component without assigning an unsupported maximum cam speed.

Problem Solved

Cam contact links pneumatic switching to the mechanical cycle position, giving the control circuit a locally generated timing event through the monostable roller valve.

Cam contact 80 l/min nominal 2 mm nominal size
Select your currency