LOCTITE® SF 7039 is a contact spray cleaner formulated for use on electrical contacts exposed to moisture or other contaminants, without damaging existing varnishes. It leaves a water repellant residue and is typically used in applications with an operating temperature range of -30 °C to +50 °C.

• Does not affect insulating varnishes
• For cleaning electrical contacts, relays, switchgear, etc, which are exposed to moisture or other contamination

Volume: 400ml

LOCTITE® SF 7061 is a non-CFC solvent-based formulation for cleaning and degreasing surfaces to be bonded with LOCTITE® adhesives. The product is used as a final pre-assembly cleaning treatment to remove most greases, oils, lubrication fluids, metal cuttings and fines from surfaces to be bonded. Its high solvent power allows it to be very effective in other degreasing or part-cleaning applications.

• Removes dirt, resins, lacquer, oils and greases
• Very fast evaporation
• Solvent-based (acetone) general parts cleaner

Volume: 400ml

LOCTITE® SF 7063 is our general-purpose product for cleaning and degreasing any kind of surface or machinery component before proceeding with a repair or assembly job involving LOCTITE® adhesives. It is a solvent-based cleaner and the product leaves no residue. LOCTITE 7063 removes most greases, oils, lubrication fluids and metal cuttings.

• Solvent-based general parts cleaner
• Ideal for use prior to adhesive bonding and sealing applications
• Removal of most greases, oils, lubrication fluids, metal cuttings and fines from all surfaces
• Leaves no residue

Volume: 400ml

 

LOCTITE® SF 7070 is a solvent-based (non-CFC) parts cleaner and degreaser formulated specifically to prepare plastic components ready for bonding with adhesives. Suitable for use as a spray or in immersion cleaning at room temperature, the product is able to remove most oils, greases, lubrication fluids, metal cuttings and fines from plastic parts without the risk of stress cracks.

• Solvent-based general parts cleaner
• Designed for use on plastic components
• Can be applied by spray or immersion
• No risk of stress cracks

Volume: 400ml

LOCTITE® SF 7200 is designed to remove cured chemical gaskets by softening the material on the flanges. Once applied, the product develops a foam-like layer on the gasket, preventing the agent from running off the desired location. It therefore keeps working for the required duration. Typical applications include removal of all types of chemical gaskets from metal flanges. It is particularly suitable for aluminum or other soft metal flanges where scraping could lead to surface damage.

• Removes cured gasket sealants and traditional gaskets in 10 to 15 minutes
• Minimal scraping
• Usable on most types of surface