LOCTITE® HY 4060 GY is a two component, general purpose structural adhesive that provides a high strength combined with fast fixture at room temperature. LOCTITE HY 4060 GY provides good temperature and moisture resistance which also makes it suitable for applications in high temperature/humidity environments. It is designed to bond a variety of substrates including metals, most plastics and rubbers. This product is ready-to-use and can be dispensed directly from the pack without additional equipment. The two-colored components of LOCTITE HY 4060 GY allow for indication of proper mixing.

• General purpose
• Very fast fixture at room temperature
• Cyanoacrylate/epoxy hybrid
• Good temperature and moisture resistance
• Bonds a variety of substrates including metals, most plastics and rubbers
• Ready-to-use and can be dispensed directly from the pack for manual mixing
• Two, colored components allow the indication of proper mixing

LOCTITE® HY 4070 Universal Bonder is designed for the assembly of parts with bond gaps up to 0.2 in (5 mm), and/or for applications where the complete cure of excess adhesive is a must. The gel consistency prevents adhesive flow even on vertical surfaces. HY 4070 is ideally suited for applications where temperature and moisture resistance is required. Best application results are achieved with use of the LOCTITE cyanoacrylate mixing nozzle (contained in the 11 gram kit).

• Fast fixturing
• Moisture resistant
• Temperature resistance from -40 to +100°C
• Gap filling up to 0.2 in (5 mm)
• Gel consistency prevents adhesive flow, even on vertical surfaces.
• Excellent bonding characteristics to a variety of substrates including plastics, rubbers, and metals

Volume: 11g, 50g

LOCTITE® HY 4080 GY is a 2-part, grey, cyanoacrylate/acrylic hybrid structural adhesive providing toughness and excellent adhesion to metals, composites and plastics. It provides fast fixture at room temperature and high operational strength within the first hour. It has good resistance to peel and impact loads while maintaining high shear strength over a wide range of temperatures and larger gaps. Best application results are achieved with LOCTITE® 50 ml Adhesive Mixing Nozzle (IDH 1826921), LOCTITE® 400 ml Adhesive Mixing Nozzle (IDH 1573135), LOCTITE® 96001 (IDH 267452) or LOCTITE® 983439 (IDH 218311).

• High viscosity (thixotropic)
• Good resistance to peel and impact loads while maintaining high shear strength
• Excellent adhesion to metals, composites and plastics
• Fast fixture at room temperature and high operational strength within the first hour

Volume: 50g