Loctite 601 : High strength, dimethacrylate ester-based retaining compound with medium cure speed and low viscosity; suitable for filling small gaps.
Loctite 603 : Retaining Compound – high strength. Ideal for bearings. For use on close-fitting cylindrical parts. High oil tolerance.
Loctite 609 : High strength methacrylate ester acrylic retaining compound designed for the bonding of cylindrical fitting parts.
Loctite 620 : Designed for the bonding of cylindrical fitting parts.

SKU N/A Category Loctite

Model

Net Volume (ml)

Clear

Loctite is an brand of adhesives, sealants, surface treatments, and other industrial chemicals that include acrylic, anaerobic, cyanoacrylate, epoxy, hot melt, silicone, urethane, and UV/light curing technologies.

Features and Benefits

Loctite 601

LOCTITE® 601 is a green, anaerobic, low viscosity, medium cure speed, dimethacrylate ester-based retaining compound suitable for a max. diametrical clearance of 0.1 mm. It is a high strength product for applications that require a permanent bond. Fixture time on steel is 25 min and service temperature from -55ºC to +150ºC. Fluorescence allows product presence to be monitored.

Medium cure speed
1-part product, requires no mixing
Low viscosity, small gap filling
High strength for permanent bonds
Fluoresces for presence monitoring

Volume: 50ml, 250ml

Loctite 603

LOCTITE® 603 is a high-strength retaining compound. Designed for the bonding of cylindrical fitting parts, especially for sintered bearings and also where consistently clean surfaces cannot be assured. The product cures when confined in the absence of air between close-fitting metal surfaces and prevents loosening and leakage due to shock and vibration. It has a high oil tolerance.

High-strength retaining compound
Especially suitable for sintered bearings
High oil tolerance

Volume: 50ml, 250ml

Loctite 609

LOCTITE® 609 is a green, high strength methacrylate ester acrylic retaining compound designed for the bonding of cylindrical fitting parts. The product cures in the absence of air between close fitting metal surfaces. Typical applications include rotor to shafts in fractional and subfractional horsepower motors. Locks bushings and sleeves in housings on shafts. Augments press fits.

Low viscosity
Augments press fits
Prevents loosening and leakage from shock and vibration
Tested to the lot requirements of Military Specification Mil-R-46082B (this is a regional approval)

Volume: 50ml, 250ml

Loctite 620

LOCTITE® 620 is a retaining compound designed for the bonding of cylindrical fitting parts. The product cures when confined in the absence of air between close-fitting metal surfaces and prevents loosening and leakage due to shock and vibration. Typical applications include locating pins in radiator assemblies, sleeves in pump housings and bearings in auto transmissions. Particularly suitable for applications where temperature resistance up to 200°C is required.

Ideal for retaining pins in radiator assemblies, sleeves in pump housings and bearings in auto transmissions
High temperature resistance
DVGW approval (EN 751-1): NG-5146AR0622

Volume: 50ml, 250ml