Sale!

Festo 4472 Elbow Connector, G1/4 Male, 8 mm OD / 6 mm ID Tube

Original price was: USD 13.26.Current price is: USD 12.22.

L-shaped barbed connector with union nut, G1/4 male thread, 4.9 mm nominal size, sealing ring and −0.95 to 10 bar range for compressed-air tubing.

SKU Festo-4472 Category
Festo Pneumatic Fittings

Festo LCK-1/4-PK-6 Elbow Quick Connector

BrandFesto
Model IdentifierLCK-1/4-PK-6
Official Part Number4472

Technical Overview

The Festo LCK-1/4-PK-6 is an L-shaped elbow connector joining a G1/4 male port to 8 mm outside-diameter, 6 mm inside-diameter tubing through a barbed fitting and union nut. Its 4.9 mm nominal size, sealing ring and −0.95 to 10 bar rating support compressed-air connections across −10 to +60 °C.

G1/4 male-thread elbow connector with union-nut barbed connection for 8 mm OD / 6 mm ID tubing and 4.9 mm nominal size.

Key Features

  • L-shaped elbow quick connector
  • G1/4 male thread at port 1
  • Barbed union-nut connection for 8 mm OD / 6 mm ID tubing
  • 4.9 mm nominal size
  • Sealing-ring thread seal
  • Anodised aluminium-alloy union nut and hollow bolt
  • Die-cast-zinc swivel fitting
  • −0.95 to 10 bar over the full temperature range
  • 11 Nm nominal tightening torque with ±10% tolerance
  • −10 to +60 °C ambient range and CRC 1 corrosion resistance

Route a compressed-air line around a corner from a G1/4 male thread to 8 mm OD / 6 mm ID tubing with union-nut retention.

Technical Specification Matrix

ParameterValue
Nominal size4.9 mm
Type of seal on screwed plugSealing ring
Mounting positionAny
DesignL-shape
Size of pack10
Operating pressure complete temperature range-0.095 MPa...1 MPa; -0.95 bar...10 bar; -13.775 psi...145 psi
Operating mediumCompressed air to ISO 8573-1:2010 [7:-:-]
Note on operating and pilot mediumLubricated operation possible
Corrosion resistance class CRC1 - Low corrosion stress
LABS (PWIS) conformityVDMA24364-B1/B2-L
Ambient temperature-10 °C...60 °C
Nominal torque11 Nm
Tolerance for nominal tightening torque±10%
Pneumatic connection, port 1Male thread G1/4
Pneumatic connection, port 2For tubing outside diameter of 8 mm; For barbed fitting inside diameter of 6 mm with nut
Material union nutWrought aluminium alloy, anodised
Note on materialsRoHS compliant
Material sealing ringReinforced PA; TPE-U(PU)
Material hollow boltWrought aluminium alloy, anodised
Material swivel fittingDie-cast zinc
Select your currency