KTS-WB41141142ZZZZ Contrast Sensors – SICK Sensor

USD $ 199.41


SICK sensor one of the world’s leading producers of sensors and sensor solutions for industrial applications. SICK is a technology and market leader in Factory and Logistics Automation as well as Process Automation. The sensor range are: Laser Sensors, Cylinder Sensors, Photoelectric Sensors, Fork Sensors, Encoders, Color Sensors, Distance Sensor, Contrast Sensor, Color Sensor, Inductive Proximity Sensors, Fiber Optic Sensor with our signature range sick sensor intelligence.

Part Number: 1218200
Contrast Sensor Model: KTS-WB41141142ZZZZ
OEM Spec Ref 


Special applicationsStandard
Device typeEasy Teach
Dimensions (W x H x D)26 mm x 62 mm x 47.5 mm
Sensing distance13 mm
Sensing distance tolerance± 3 mm
Housing design (light emission)Middle
Light sourceLED, RGB 1)
Wave length470 nm, 525 nm, 625 nm
Light emissionLong side of housing
Light spot size1.2 mm x 3.9 mm
Light spot directionVertical 2)
Receiving filtersNone
Teach-in mode2-point teach-in
Output functionLight/dark switching
Delay time
Special features
Delivery status2-point teach-in
Parameter presettingsNone
  • 1) Average service life: 100,000 h at TU = +25 °C.
  • 2) In relation to long side of housing.



Supply voltage10.8 V DC … 28.8 V DC 1)
Ripple≤ 5 Vpp 2)
Current consumption< 100 mA 3)
Switching frequency25 kHz 4)
Response time20 µs 5)
Jitter10 µs
Switching outputPush-pull: PNP/NPN
Switching output (voltage)Push-pull: PNP/NPN HIGH = VS – 3 V / LOW ≤ 3 V
Output current Imax.100 mA 6)
Input, teach-in (ET)Teach: U = 10 V … < VS
Retention time (ET)35 ms, non-volatile memory
Connection typeMale connector M12, 4-pin
Protection classIII
Circuit protectionUV connections, reverse polarity protected

Output Q short-circuit protected

Interference pulse suppression

Enclosure ratingIP67
Weight68 g
Housing materialPlastic, VISTAL®
Optics materialPlastic, COP
  • 1) Limit values: DC 12 V (–10 %) … DC 24 V (+20 %). Operation in short-circuit protected network max. 8 A.
  • 2) May not exceed or fall below Uv tolerances.
  • 3) Without load.
  • 4) With light/dark ratio 1:1.
  • 5) Signal transit time with resistive load.
  • 6) Total current of all Outputs.




Go to Top