Sale!

Festo 178455 Clamping Cartridge, 10 mm Rod, 350 N Static Hold

Original price was: USD 156.78.Current price is: USD 135.20.

Spring-applied cartridge with pneumatic release, bidirectional static clamping, 3 bar release pressure, anodised aluminium housing and 50 g mass.

SKU Festo-178455 Category
Festo Clamping Components

Festo KP-10-350 Clamping Cartridge

BrandFesto
Model IdentifierKP-10-350
Official Part Number178455

Technical Overview

The Festo KP-10-350 clamps 10 mm round material using a spring-applied tilting-wedge mechanism, with pneumatic pressure releasing the clamp. Its 350 N holding-force rating applies to static loads in both axial directions, and the exact datasheet specifies 3–10 bar operation with a 3 bar release pressure. The cartridge is intended for assembly into clamping units, with plain bearings required on both sides of the housing. Suitable steel rods need h8 diameter tolerance and Rmax 4 µm surface roughness. An anodised aluminium housing, brass jaws and POM piston form a 50 g component for −10 to 80 °C ambient conditions.

Spring-applied, pneumatically released clamping cartridge for 10 mm rods, with 350 N static holding force, 3 bar release pressure and 50 g mass.

Key Features

  • Clamping cartridge for 10 mm round material
  • 350 N static holding force, acting in both axial directions
  • Spring-force clamping with compressed-air release
  • Tilting-wedge mechanism; piston-rod-at-one-end variant
  • 3–10 bar operating range with 3 bar release pressure
  • For static clamping; not suitable for positioning or dynamic operation
  • Steel rod requirements include h8 diameter tolerance and Rmax 4 µm roughness
  • Housing installation requires plain bearings on both sides
  • Anodised aluminium housing, brass jaws, POM piston and NBR/PU seals
  • 50 g product weight, −10 to 80 °C ambient range and CRC 2 classification

Hold a suitable stationary 10 mm steel rod with 350 N rated static force using spring-applied clamping and pneumatic release.

Technical Specification Matrix

ParameterValue
Mounting positionAny
Type of clamping with direction of actionAt both ends; Clamping via spring force, released via compressed air
DesignTilting wedge mechanism
VariantsPiston rod at one end
Operating pressure0.3 MPa...1 MPa; 3 bar...10 bar; 43.5 psi...145 psi
Release pressure0.3 MPa; 3 bar
Round material to be clamped10 mm
Operating mediumCompressed air to ISO 8573-1:2010 [7:4:4]
Note on operating and pilot mediumLubricated operation possible (in which case lubricated operation will; always be required)
Corrosion resistance class CRC2 - Moderate corrosion stress
LABS (PWIS) conformityVDMA24364-B1/B2-L
Ambient temperature-10 °C...80 °C
Static holding force350 N
Physical Weight (kg)0.05
Material sealsNBR; TPE-U(PU)
Material springSpring steel
Material housingAluminium; anodised
Material clamp jawsBrass
Material pistonPOM
Operating applicationStatic clamping; not suitable for positioning or dynamic operation
Rod material requirementsSteel, hard chrome-plated; steel, hardened; or rolled steel with tensile strength >650 N/mm² and HB30 hardness >175
Rod diameter toleranceh8
Rod surface roughnessRmax = 4 µm
Housing installation requirementPlain bearings on both sides of the housing

Industrial Applications

1. Stationary Fixture-Rod Holding

A fixture first moves a suitable 10 mm steel rod to its working location and then needs to hold it stationary. The cartridge applies spring force through its tilting-wedge mechanism, with a 350 N static holding rating in both axial directions. Pneumatic pressure releases the clamp for the next adjustment; the cartridge holds an established position rather than positioning or braking a moving rod.

Problem Solved

Spring-applied static clamping retains an already stationary fixture rod against axial loading, with pneumatic release providing a separate controlled state for subsequent adjustment.

10 mm rod 350 N static Bidirectional clamping

2. Static Dwell with Changing Pneumatic Conditions

A machine holds a stationary rod during a process dwell while the surrounding pneumatic supply may fluctuate or develop system leakage. Festo documents spring-force holding over long periods despite those changing pressure conditions. This 10 mm cartridge provides the selected 350 N static rating, with a 3 bar release-pressure specification defining how compressed air disengages the clamp.

Problem Solved

Mechanical spring clamping maintains the static holding function without relying on continuously applied pneumatic clamping pressure, supporting a stationary dwell when the surrounding air conditions change.

Spring-applied hold 350 N static rating 3 bar release

3. Assembly of a Custom Rod-Clamping Unit

A machine builder assembles a compact clamping unit around a suitable 10 mm steel rod and needs a defined clamping element. The 50 g cartridge supplies that element with spring application and pneumatic release. Festo requires plain bearings on both sides of the housing, h8 rod-diameter tolerance and Rmax 4 µm surface roughness, defining the mechanical integration conditions for the custom assembly.

Problem Solved

A cartridge-format clamping element supplies the holding mechanism within a custom housing, with explicit rod and bearing requirements defining how the surrounding assembly supports static clamping.

Cartridge integration h8 steel rod Bearings on both sides
Select your currency