1. Pneumatic End-Position Sequencing
A moving machine carriage reaches a pushbutton positioned at its travel endpoint. Mechanical contact operates the direct 3/2 normally closed valve, providing a pneumatic switching event for the next stage of a pneumatic sequence. M5 connections and 80 l/min nominal flow characterize the compact signal interface, while the specified 23 N actuating force defines the pushbutton-contact requirement.
Problem Solved
The pushbutton converts a physical endpoint event into pneumatic switching, allowing the sequence to respond to mechanism position through a direct mechanical valve interface.
Pushbutton actuation
3/2 NC monostable
M5 ports
2. Workpiece-Contact Pneumatic Presence Signal
A fixture presents a workpiece against a pushbutton to establish a pneumatic presence signal before a process step. This valve changes its normally closed 3/2 state through direct mechanical actuation, requiring no electrical coil supply. Its 23 N actuating force and through-hole mounting provide documented parameters for arranging the fixture contact and supporting the valve body.
Problem Solved
Mechanical contact gives the pneumatic circuit a workpiece-present switching event, addressing absent-part sequencing without requiring an electrical sensor output at the contact point.
23 N actuation
Direct operation
Through-hole mounting
3. Local Pneumatic Setup Command
A technician needs a local pneumatic command while setting up a compact machine circuit. Pressing the K-3-M5 pushbutton operates its direct 3/2 normally closed monostable function, tying the command interval to physical button operation. The M5 connections and 80 l/min nominal flow identify the signal valve interface, while 23 N is the specified actuating force rather than an assumed light-touch control.
Problem Solved
The directly operated pushbutton provides a local pneumatic command without an electrical coil interface, allowing setup actions to be initiated at the compact signal circuit.
Pushbutton operation
3/2 NC monostable
23 N actuation