GL-100 – Square Proximity Sensor – Panasonic Proximity Sensor
USD $ 12.81 – USD $ 23.31
SKU: N/A
| class | Detection distance (Note 1) |
Model | output | Output actions | |
|---|---|---|---|---|---|
| standard | Maximum working distance: 5mm±10% stable detection range:0~4mm |
GL-118H | NPN output transistor | Approaching ON | |
| GL-118HB | ON when leaving | ||||
| Long-range type | Maximum working distance: 12mm±10% stable detection range:0~10mm |
GL-118HL | Approaching ON | ||
| Heterogeneous | GL-118HLI | ||||
| (Note 1): | The maximum working distance is the maximum distance at which the sensor can detect an object detected by the standard. The stable detection range is the detection distance at which the sensor stabilizes the detected object of the standard (even in the case of ambient temperature changes and/or fluctuations in the supply voltage). |
|---|
Specification
| type | standard | Long distance | Long distance | ||
|---|---|---|---|---|---|
| Heterogeneous | |||||
| Model | GL-118H | GL-118HB | GL-118HL | GL-118HLI | |
| Installation method | Unmasked | ||||
| Maximum working distance (Note 2). | 5mm±10% | 12mm±10% | |||
| Stabilize the detection range (Note 2). | 0mm~4mm | 0mm~10mm | |||
| Standard detection objects | Iron plate 18mm× 18mm×t1mm | Iron plate 36mm×36mm×t1mm | |||
| Should be poor | Less than 15% of working distance (standard detection object) | ||||
| Supply voltage | 10V~30V DC pulsation P-P-P10% or less | ||||
| Consumes current | 10mA or less | ||||
| Output status | Approaching ON | ON when leaving | Approaching ON | ||
| output | • Extended voltage: 30V DC or less • Load current: 100mA or less • Residual voltage: 1.5V or less (at 100mA load current) |
||||
| Short-circuit protection | Equipped (auto-recovery) | ||||
| Working status indicator | Orange LED (on when output ON) | ||||
| Frequency of reaction | 1kHz | 500Hz | |||
| Environmental performance |
Protection Construct | IP67G (Note 3). | |||
| Use ambient temperature | -25 °C ~ +70 °C (no condensation or frost), storage: -25 °C ~ +70 °C | ||||
| Use ambient humidity | 35%RH~85%RH or less, storage: 35%RH~85%RH | ||||
| Withstand voltage | Connect an AC voltage of 1000V between all connected power terminals and the housing for 1 minute | ||||
| Insulation resistance | Between all power connection terminals and housing, above 500MΩ, based on a DC500V high-impedance meter | ||||
| Vibration resistant | In the X, Y and Z directions, it can withstand the vibration of 10Hz~50Hz and double amplitude of 1.5mm for up to 2 hours |
||||
| Impact resistant | In the X, Y and Z directions, it can withstand three impacts with an acceleration of 500m/s2 (about 50G). | ||||
| Material | Housing: ABS+PBT | ||||
| cable | 3-core oil-resistant rubber cable with a cross-sectional area of 0.2mm2, 1m long | ||||
| Cable extension | The total length of cables with a cross-sectional area of 0.2mm2 or more can be extended to 100m | ||||
| weight | Approx. 65g | ||||
(Note 1) The measurement condition is ambient temperature = +23°C if not specified.
(Note 2) The maximum working distance is the maximum distance at which the sensor can detect a standard detection object.
The stable detection range is the detection distance at which the sensor stabilizes the detected object of the standard (even in the case of ambient temperature changes and/or fluctuations in the supply voltage).
(Note 3) If used in an environment where cutting oil is splashed, the product may age due to additives contained in the oil, so please check the resistance of the cutting oil used in advance.
