Sale!

Festo 3563 Straight Connector, G1/8 Male, 4 mm OD / 3 mm ID Tube

Original price was: USD 8.58.Current price is: USD 8.06.

Straight barbed connector with union nut, G1/8 male thread and sealing ring, for 4 mm OD / 3 mm ID tubing, rated −0.95 to 10 bar and −10 to +60 °C.

SKU Festo-3563 Category
Festo Pneumatic Fittings

Festo CK-1/8-PK-3 Straight Quick Connector

BrandFesto
Model IdentifierCK-1/8-PK-3
Official Part Number3563

Technical Overview

The Festo CK-1/8-PK-3 is a straight connector joining a G1/8 male thread to 4 mm outside-diameter, 3 mm inside-diameter tubing through a barbed fitting with union nut. It uses a sealing ring, anodised aluminium-alloy screwed plug and anodised aluminium-alloy nut, with −0.95 to 10 bar operation across −10 to +60 °C.

Straight G1/8 male-thread connector with barbed union-nut connection for 4 mm OD / 3 mm ID tubing and a 2 mm nominal size.

Key Features

  • Straight quick-connector design
  • G1/8 male thread at pneumatic port 1
  • Barbed connection with nut for 4 mm OD / 3 mm ID tubing
  • 2 mm nominal size
  • Sealing-ring thread seal
  • Anodised aluminium-alloy screwed plug and anodised aluminium-alloy union nut
  • −0.95 to 10 bar across the complete temperature range
  • −10 to +60 °C ambient range
  • 3.5 Nm nominal tightening torque with ±20% tolerance
  • Class 4 cleanroom suitability and CRC 2 corrosion resistance

Connect a G1/8 pneumatic port to 4 mm OD / 3 mm ID tubing using barbed retention, a union nut and a sealing ring.

Technical Specification Matrix

ParameterValue
Nominal size2 mm
Type of seal on screwed plugSealing ring
Mounting positionAny
DesignStraight design
Size of pack10
Operating pressure complete temperature range-0.095 MPa...1 MPa; -0.95 bar...10 bar; -13.775 psi...145 psi
Note on operating pressureWater: max. 0.6 MPa at max. 50°C
Operating mediumCompressed air to ISO 8573-1:2010 [7:-:-]; Water (liquid, ice-free)
Note on operating and pilot mediumLubricated operation possible; Water: G-thread only possible with sealing ring type OL as additional; accessory
Corrosion resistance class CRC2 - Moderate corrosion stress
LABS (PWIS) conformityVDMA24364-B1/B2-L
Cleanroom suitability, measured according to ISO 14644-14Class 4 according to ISO 14644-1
Ambient temperature-10 °C...60 °C
Nominal torque3.5 Nm
Tolerance for nominal tightening torque±20%
Pneumatic connection, port 1Male thread G1/8
Pneumatic connection, port 2For tubing outside diameter of 4 mm; For barbed fitting I.D. 3 mm with nut
Material union nutWrought aluminium alloy, anodised
Material screwed plugAnodised wrought aluminium alloy
Note on materialsRoHS compliant
Material sealing ringReinforced PA; TPE-U(PU)
Select your currency