Contact Us:
sales@inosaki.com

BTF13-P1HM0525 – HighLine – SICK Wire Draw Encoders

$ 2,928.59

SKU SICK 1034306 Category

Out of stock

Incremental encoders generate information about position, angle, and rotation counts. The resolution is defined in the number of lines or pulses per rotation, which the encoder transmits to the control unit for each rotation. The current position can be determined by the control unit by counting these pulses. A reference run can be necessary when switching on the machine.

Part Number: 1034306
Encoders Model: BTF13-P1HM0525
OEM Spec Ref 

Performance BTF

Measurement range 0 m … 5 m
Encoder Absolute encoders
Resolution (wire draw + encoder) 0.04 mm 1) 2)
Repeatability ≤ 1 mm 3)
Linearity ≤ ± 2 mm 3)
Hysteresis ≤ 2 mm 3)
  • 1) The values shown have been rounded.
  • 2) Example calculation based on the BTF08 with PROFINET: 200 mm (wire draw length per revolution – see Mechanical data): 262,144 (number of steps per revolution) = 0.001 mm (resolution of wire draw + encoder combination).
  • 3) Value applies to wire draw mechanism.

 

Interfaces BTF

Communication interface PROFIBUS DP
Programmable/configurable

 

Electrical data BTF

Connection type Bus adapter for PROFIBUS 1)
Supply voltage 10 V … 32 V
Power consumption ≤ 2 W (without load)
MTTFd: mean time to dangerous failure 150 years (EN ISO 13849-1) 2)
  • 1) Order bus adapter separately.
  • 2) This product is a standard product and does not constitute a safety component as defined in the Machinery Directive. Calculation based on nominal load of components, average ambient temperature 40°C, frequency of use 8760 h/a. All electronic failures are considered hazardous. For more information, see document no. 8015532.

 

Mechanical data BTF

Weight 3.39 kg
Measuring wire material Highly flexible stranded steel 1,4401 stainless steel V4A
Weight (measuring wire) 7.1 g/m
Housing material, wire draw mechanism Aluminum (anodised), plastic
Spring return force 15 N … 20 N 1)
Length of wire pulled out per revolution 334.1 mm
Life of wire draw mechanism Typ. 1,000,000 cycles 2) 3)
Actual wire draw length 5.2 m
Wire acceleration 70 m/s²
Operating speed 8 m/s
Mounted encoder ATM60 PROFIBUS, ATM60-P1H13X13, 1030014
Mounted mechanic MRA-F130-105D2, 6028626
  • 1) These values were measred at an ambient temperature of 25 °C. There may be variations at other temperatures.
  • 2) Average values, which depend on the application.
  • 3) The service life depends on the type of load. This is influenced by environmental conditions, the installation location, the measuring range in use, the traversing speed, and acceleration.

 

Ambient data BTF

EMC According to EN 61000-6-2 and EN 61000-6-3
Enclosure rating IP64
Operating temperature range –20 °C … +70 °C

Additional information

Weight 3.754 kg
Dimensions 27.0 × 17.0 × 29.0 cm

Related Products

PEPPERL+FUCHS_Diffuse Mode Sensors_ML100-8-H-350-RT-102-115
Banner_SME312LPQD
Festo_Piston Rod Cylinders_DSNU-10-50-P-A_19186_1
Festo_Pneumatic Mufflers__UO-1-4_197584
Festo_Linear axes_EGC-80-400-TB-KF-0H-GK_575832_1
Loctite 424 - 20g
$ 16.56 - $ 35.88
Select your currency