SIMATIC S7- Digital Output – Siemens Modules

$ 1,546.29

SKU: 6ES7326-2BF01-0AB0

Specifications

Part Number 6ES7326-2BF01-0AB0
Supply voltage
Rated value (DC) 24 V; 1L+
Reverse polarity protection Yes
Load voltage L+
● Rated value (DC) 24 V; 2L+, 3L+
● Reverse polarity protection No
Input current
from supply voltage 1L+, max. 70 mA
from load voltage 2L+ (without load), max. 100 mA
from load voltage 3L+ (without load), max. 100 mA
from backplane bus 5 V DC, max. 100 mA
Power loss
Power loss, typ. 12 W
Digital outputs
Number of digital outputs 10
Short-circuit protection Yes
Limitation of inductive shutdown voltage to L+ (-53 V) without series diode, L+ (-33 V) with series diode
Switching capacity of the outputs
● on lamp load, max. 5 W
Output voltage
● for signal “1”, min. L+ (-1 V) without series diode, L+ (-1.8 V) with series diode
Output current
● for signal “1” rated value 2 A 7 mA
● for signal “1” permissible range for 0 to 40 °C, min.
● for signal “1” permissible range for 0 to 40 °C, max. 2 A; 2 A for horizontal installation, 1 A for vertical installation
● for signal “1” permissible range for 40 to 60 °C, min. 7 mA
● for signal “1” permissible range for 40 to 60 °C, max. 1 A; for horizontal installation
● for signal “0” residual current, max. 0.5 mA
Switching frequency
● with resistive load, max. 10 Hz
● with inductive load, max. 2 Hz
● on lamp load, max. 10 Hz
Total current of the outputs (per group)
horizontal installation
— up to 40 °C, max. 7.5 A; without series diode, 5 A with series diode
— up to 60 °C, max. 5 A; without series diode, 4 A with series diode
vertical installation
— up to 40 °C, max. 5 A; without series diode, 4 A with series diode
Cable length
● shielded, max. 1 000 m; 200 m for SIL 3, AK 6, Cat 4
● unshielded, max. 600 m
Interrupts/diagnostics/status information
Alarms
● Diagnostic alarm Yes
Diagnoses
● Diagnostic information readable Yes
Diagnostics indication LED
● Fail-safe operation Yes
● Group error SF (red) Yes
Potential separation
Potential separation digital outputs
● between the channels Yes
● between the channels, in groups of 5
● between the channels and backplane bus Yes
● between the channels and the power supply of the electronics Yes
Isolation
Isolation tested with 500 V DC/350 V AC
Standards, approvals, certificates
Highest safety class achievable in safety mode
● acc. to DIN VDE 0801 AK 5 and 6
● acc. to EN 954 Cat. 4
● Performance level according to ISO 13849-1 e
● SIL acc. to IEC 61508 SIL 3
connection method / header
required front connector 40-pin
Dimensions
Width 80 mm
Height 125 mm
Depth 120 mm
Weights
Weight, approx. 465 g
Weight 0.532 kg
Dimensions 13.2 × 15.5 × 8.9 cm

Related products