Name: SIMATIC ET 200AL - PROFINET Interface Module IM 157-1 PN - Siemens Interface Modules
SKU: 6ES7157-1AB00-0AB0
Price: 286.88 USD
Availability: InStock

$ 286.88

SKU 6ES7157-1AB00-0AB0 Category Siemens Modules

The IM 157-1 PN interface module enables the connection of ET 200AL to PROFINET and handles the communication between the I/O modules and the higher-level PROFINET I/O controller in the PLC autonomously.

Siemens Interface Modules ET 200AL Product Specifications:

Article number		6ES7157-1AB00-0AB0
		ET 200AL, IM 157-1 PN
General information
Product type designation		IM 157-1 PN
HW functional status		FS02
Firmware version		V1.0.x
Vendor identification (VendorID)		002AH
Product function
● I&M data		Yes; I&M0 to I&M4
Engineering with
● STEP 7 TIA Portal configurable/integrated from version		STEP 7 V13 SP1 or higher
● STEP 7 configurable/integrated from version		From V5.5 SP4 Hotfix 3
● PROFINET from GSD version/GSD revision		GSDML V2.3.1
Configuration control
via dataset		Yes
Supply voltage
power supply according to NEC Class 2 required		No
Load voltage 1L+
● Rated value (DC)		24 V
● permissible range, lower limit (DC)		20.4 V
● permissible range, upper limit (DC)		28.8 V
● Reverse polarity protection		Yes; against destruction
Input current
Current consumption (rated value)		100 mA
from load voltage 1L+ (unswitched voltage)		4 A; Maximum value
from load voltage 2L+, max.		4 A; Maximum value
Power loss
Power loss, typ.		2.9 W
Address area
Address space per station
● Address space per station, max.		1 430 byte
Interfaces
Number of PROFINET interfaces		1
1. Interface
Interface type		PROFINET
Interface types
● M12 port		Yes; 2x M12 D-coded
● integrated switch		Yes
Protocols
● PROFINET IO Device		Yes
● Open IE communication		Yes
Interface types
M12 port
● Transmission procedure		PROFINET with 100 Mbit/s full duplex (100BASE-TX)
● 10 Mbps		Yes; for Ethernet services
● 100 Mbps		Yes; PROFINET with 100 Mbit/s full duplex (100BASE-TX)
● Autonegotiation		Yes
● Autocrossing		Yes
Protocols
PROFINET IO Device
Services
— IRT		Yes; 250 µs, 500 µs, 1 ms, 2 ms, 4 ms, 8 ms, 16 ms, 32 ms, 64 ms, 128 ms
— PROFIenergy		Yes
— Shared device		Yes
— Number of IO Controllers with shared device, max.		4
Redundancy mode
Media redundancy
— MRP		Yes
— MRPD		Yes
Open IE communication
● TCP/IP		Yes
● SNMP		Yes
● LLDP		Yes
Interrupts/diagnostics/status information
Diagnostics function		Yes
Alarms
● Diagnostic alarm		Yes
Diagnostics indication LED
● RUN LED		Yes; green LED
● ERROR LED		Yes; red LED
● MAINT LED		Yes; Yellow LED
● Connection display LINK TX/RX		Yes; 2x green LED
Potential separation
between the load voltages		Yes
between PROFINET and all other circuits		Yes
Isolation
Isolation tested with		707 V DC (type test)
Degree and class of protection
IP degree of protection		IP65/67
Standards, approvals, certificates
Suitable for safety-related tripping of standard modules		Yes; From FS01
Highest safety class achievable for safety-related tripping of standard modules
● Performance level according to ISO 13849-1		PL d
● Category according to ISO 13849-1		Cat. 3
● SIL acc. to IEC 62061		SIL 2
Ambient conditions
Ambient temperature during operation
● min.		-25 °C
● max.		55 °C
connection method / header
Design of electrical connection for supply voltage		M8, 4-pole
ET-Connection
● ET-Connection		M8, 4-pin, shielded
Dimensions
Width		45 mm
Height		159 mm
Depth		40 mm
Weights
Weight, approx.		263 g