Menu
Menu
$ 39.16
The signal board is mounted directly on the front of the CPU body; without occupying the cabinet space,its installation and disassembly are convenient and quick. For a small amount of I/O points extension and more demand for communication ports, the signal board with new design can provide more economical and flexible solutions.
| Model | SB DT04 |
| Order No.: (MLFB) | 6ES7 288-5DT04-0AA0 |
| Standard | |
| Dimension W x H x D (mm) | 35 x 52.2 x 16 |
| Weight | 18.1 g |
| Power consumption | 1.0 W |
| Current consumption (SM bus) | 50 mA |
| Current consumption (24 V DC) | Each input used 4mA |
| Analogue input | |
| No. of Inputs | 2 |
| Type | Sinking type/sourcing type (IEC type 1 sinking) |
| Rated voltage | 24 V DC, When the current is 4 mA, nominal value |
| Allowable continuous voltage | Max. 30 V DC |
| Surge voltage | 35 V DC, lasting 0.5 s |
| Logic 1 signal (min) | 15 V DC when the current is 2.5mA. |
| Logic 0 signal (max) | 5 V DC when the current is 1 mA. |
| Isolation (field side and logic side) | 500 V AC, lasting 1 min |
| Isolation group | 1 |
| Filter time | Each channel can be selected separately 0.2, 0.4, 0.8, 1.6, 3.2, 6.4 and 12.8 μs 0.2, 0.4, 0.8, 1.6, 3.2, 6.4 and 12.8 μs |
| Number of inputs connected at the same time | 2 |
| Cable length | 500 m (shielded), 300 m (non shielded) |
| Digital output | |
| Number of outputs | 2 |
| Type of output | Solid state -MOSFET |
| Voltage range | 20.4 ~ 28.8 V DC |
| Logic 1 signal at max current | Min 20 V DC |
| Logic 0 signal at max current | Max 0.1 V DC |
| Rated current of each point (max) | 0.5 A |
| Lamp load | 5 W |
| Contact resistance in the ON status | Max 0.6 Ω |
| Current leakage at point | Max. 10 μA |
| Surge current | 5 A, max lasting 100 ms |
| Overload protection | No |
| Isolation (field side and logic side) | 500 V AC, lasting 1 min |
| Isolation group | 1 |
| Current of each public end | 1:00 AM |
| Inductive voltage clamp | L + – 48 V, 1 W loss |
| Switching delay | Disconnected to connected maximally 2 μs connected to disconnected maximally 10 μs |
| Output state under the STOP mode | Last value or replicable value (The default value is 0) |
| Number of inputs connected at the same time | 2 |
| Cable length (max) | 500 m (shielded), 150 m (non shielded) |
| Weight | N/A |
|---|---|
| Dimensions | N/A |
INOSAKI Limited
RM B 5/F Gaylord Comm,
Bldg 114-118 Lockhart Rd.
Hong Kong
INOSAKI Sdn. Bhd.
2-1-9, Ground Floor, One Square, Tingkat Mahsuri 1,
11900 Bayan Lepas, Penan
INOSAKI Pte. Ltd.
101 Upper Cross Street,
No. 06-17, People’s Park Centre,
Singapore (058357)
