Digital Mark Sensor LX-100 – Plug-in connector type

Specifications

Type		Cable type	Plug-in connector type
Model No.	NPN output	LX-101	LX-101-Z
	PNP output	LX-101-P	LX-101-P-Z
CE marking directive compliance		EMC Directive, RoHS Directive
Sensing range		10 ± 3 mm 0.394 ± 0.118 in
Spot size		1 x 5 mm 0.039 x 0.197 in (at 10 mm 0.394 in setting distance)
Supply voltage		12 to 24 V DC ± 10 % Ripple P-P 10 % or less
Current consumption		Normal mode: 750 mW or less (Current consumption 30 mA or less at 24 V supply voltage) ECO mode: 600 mW or less (Current consumption 25 mA or less at 24 V supply voltage)
Output 1 (OUT)		<NPN output type> NPN open-collector transistor ・Maximum sink current: 50 mA ・Applied voltage: 30 V DC or less (between output and 0 V) ・Residual voltage: 1.5 V or less (at 50 mA sink current) <PNP output type> PNP open-collector transistor ・Maximum source current: 50 mA ・Applied voltage: 30 V DC or less (between output and +V) ・Residual voltage: 1.5 V or less (at 50 mA source current)	<NPN output type> NPN open-collector transistor ・Maximum sink current: 100 mA ・Applied voltage: 30 V DC or less (between output and 0 V) ・Residual voltage: 1.5 V or less (at 100 mA sink current) <PNP output type> PNP open-collector transistor ・Maximum source current: 100 mA ・Applied voltage: 30 V DC or less (between output and +V) ・Residual voltage: 1.5 V or less (at 100 mA source current)
	Short-circuit protection	Incorporated
	Output operation	Mark mode: Light-ON / Dark-ON (Auto-setting on teaching), Color mode: Consistent-ON / Inconsistent-ON (Setting on teaching)
Output 2 (OUT)		<NPN output type> NPN open-collector transistor ・Maximum sink current: 50 mA ・Applied voltage: 30 V DC or less (between output and 0 V) ・Residual voltage: 1.5 V or less (at 50 mA sink current) <PNP output type> PNP open-collector transistor ・Maximum source current: 50 mA ・Applied voltage: 30 V DC or less (between output and +V) ・Residual voltage: 1.5 V or less (at 50 mA source current)	–
	Short-circuit protection	Incorporated	–
	Output operation	Inverted operation of the output 1	–
Response time		Mark mode: 45 μs or less, Color mode: 150 μs or less
Teaching input		<NPN output type> NPN non-contact input ・Signal condition: High… +5 V to +V, or open Low… 0 to +2 V (source current: 0.5 mA or less) ・Input impedance: 10 kΩ approx. <PNP output type> PNP non-contact input ・Signal condition: High… +4 V to +V (sink current: 3 mA or less) Low… 0 to +0.6 V, or open ・Input impedance: 10 kΩ approx.
Digital display		4-digit red LED display
Sensitivity setting		Mark mode: 2-level teaching / Full-auto teaching, Color mode: 1-level teaching
Fine sensitivity adjustment function		Incorporated
Timer function		Incorporated with variable ON-delay / OFF-delay timer, switchable either effective or ineffective (Timer period: 1 to 500 ms, 9 levels variable)
Protection		IP67 (IEC)
Ambient temperature		-10 to +55 ℃ +14 to +131 ℉ (No dew condensation or icing allowed), Storage: -20 to +70 ℃ -4 to +158 ℉
Ambient humidity		35 to 85 % RH, Storage: 35 to 85 % RH
Ambient illuminance		Incandescent light: 3,000 or less lx at the light-receiving face
Voltage withstandability		1,000 V AC for one min. between all supply terminals connected together and enclosure
Vibration resistance		10 to 500 Hz frequency, 3.0 mm 0.118 in double amplitude (max. 20 G) in X, Y and Z directions for two hours each
Shock resistance		500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each
Emitting element		Combined Red / Green / Blue LEDs (Peak emission wavelength: 640 nm 0.025 mil / 525 nm 0.021 mil / 470 nm 0.019 mil)
Material		Enclosure: PBT, Display cover: Polycarbonate, Operation buttons: Silicone rubber, Lens: Glass, Lens holder: Aluminum
Cable		0.2 mm2 5-core cabtyre cable, 2 m 6.562 ft long	(Note 2)
Cable extension		Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable.
Weight		Net weight: 120 g approx., Gross weight: 180 g approx.	Net weight: 55 g approx., Gross weight: 120 g approx.
Accessory		M4 (length 30 mm 1.181 in) screw with washers: 2 pcs.

Note 1 :	Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃ +73.4 ℉ .
Note 2 :	Mating cable is not supplied with the plug-in connector type. Please order it separately.

SPOT SIZE CHARACTERISTICS (TYPICAL)

(Unit: mm in)
Setting distance L (Note 1)	Spot size (Note 2)
	Width (W)	Length (D)
7 0.276	2.0 0.079	5.5 0.217
8 0.315	1.7 0.067	5.5 0.217
9 0.354	1.2 0.047	5.3 0.209
10 0.394	1.0 0.039	5.0 0.197
11 0.433	1.3 0.051	5.0 0.197
12 0.472	1.5 0.059	5.0 0.197
13 0.512	2.0 0.079	5.0 0.197

 

Notes:

1)	Setting distance “L” represents the distance from the lens surface to the sensing object.
2)	Examples only meant for use as a guideline.