IDS Imaging UI-5242LE-NIR-MB Rev.1.2 Industrial GigE Camera
Model Variants: UI-5242LE-M-MB Rev.1.2 (Monochrome), UI-5242LE-C-MB Rev.1.2 (Color), UI-5242LE-NIR-MB Rev.1.2 (Near-Infrared Enhanced)
Sensor: e2v EV76C661ABT | Resolution: 1.31 Megapixels | Interface: Gigabit Ethernet
🔧 Product Overview
The IDS UI-5242LE-NIR-MB Rev.1.2 is a compact board-level industrial camera engineered for near-infrared (NIR) imaging applications. It features the e2v EV76C661ABT CMOS sensor, supporting both global shutter and global start shutter modes for precise and distortion-free imaging. With a resolution of 1.31 MP, 5.3 µm pixel size, and high quantum efficiency in the NIR spectrum, it excels in low-light and specialized lighting environments.
Designed with a ZIF interface, low 10g weight, and compact 45×45×13 mm dimensions, this camera is ideal for embedded vision, inspection, and custom-built systems where space and power efficiency matter.
🔗 Purchase Link – Inosaki Webstore
📐 Technical Specifications
| Parameter | Specification |
|---|---|
| Sensor Model | e2v EV76C661ABT |
| Shutter Type | Global / Rolling / Global Start Shutter |
| Sensor Format | 1/1.8″ |
| Resolution (H × V) | 1280 × 1024 |
| Pixel Size | 5.3 µm |
| Frame Rate (Free Run) | Up to 50 fps |
| Frame Rate (Triggered) | Up to 48 fps |
| Exposure Range | 0.009 ms to 2000 ms |
| Image Memory | 60 MB onboard buffer |
| Power Consumption | 2.2 W – 2.9 W |
| Dimensions (H × W × L) | 45 × 45 × 13 mm |
| Weight | 10 g |
| Operating Temp. Range | 0 °C to +55 °C |
| I/O Connector | 10-pin Molex (GPIO, Trigger, I2C) |
| Power Supply Input | 12–24 V DC |
| Mount Type | Board Level (no lens mount attached) |
⚙️ Key Features and Functional Benefits
-
Enhanced NIR Sensitivity
Optimized for near-infrared wavelengths, ideal for applications requiring visibility beyond the human eye spectrum. -
Multi-Shutter Flexibility
Supports Global Shutter, Rolling Shutter, and Global Start modes for flexible capture across dynamic scenes. -
Advanced Onboard Features
Includes linescan mode, multi-AOI (Area of Interest), fine exposure control, sequencer, and pixel correction. -
Compact & Lightweight
Board-level form factor makes it ideal for space-limited embedded systems, medical devices, or robotics. -
Robust Electrical Interface
Equipped with a 10-pin Molex connector supporting GPIOs, hardware trigger, flash output, and I2C interface. -
Fully Supported SDKs
Compatible with IDS peak, DirectShow, .NET, and LabVIEW software environments for easy integration.
📂 Downloadable Technical Resources
🔍 Representative Use Cases
-
NIR Inspection in Semiconductor & Electronics
Identifying defects, surface variations, or structural details invisible to visible light in chip wafers, PCBs, or LCD panels. -
Medical & Biomedical Imaging
Suitable for blood flow analysis, skin diagnostics, and subsurface imaging due to its enhanced NIR response and low noise. -
Surveillance & Traffic Monitoring at Night
Provides high-detail imaging under low-light or IR-illuminated conditions without visible light pollution.
📞 Contact and Technical Support
For integration consultation, bulk pricing, or system design assistance:
🔗 Contact Our Engineering Team