SICK 1092001 WL4SL-3N3132S03 NPN Laser Retro-reflective Sensor

USD 115.18

WL4SL-3N3132S03 offers 0–8 m PL80A sensing, a 650 nm Class 1 laser, teach-in, NPN light switching and a 160 mm cable with M8 three-pin plug.

SKU SICK-1092001 Category
SICK W4SL-3

SICK WL4SL-3N3132S03 Laser Retro-reflective Sensor

BrandSICK
Model IdentifierWL4SL-3N3132S03
Official Part Number1092001

Technical Overview

The SICK WL4SL-3N3132S03 is a slim laser retro-reflective photoelectric sensor for small-object detection. Polarized coaxial optics operate without a reflector minimum distance, with a 0–8 m sensing range and 0–12 m maximum range using PL80A. A 650 nm visible red Class 1 laser produces a typical 1 mm spot at 500 mm. Single-button teach-in sets sensitivity, and an NPN light-switching output connects to external machine control. Response is ≤0.5 ms under resistive load, with 1,000 Hz operation at a 1:1 light/dark ratio. The Novodur plastic housing has a PMMA front screen, M3 threaded mounting holes, IP66/IP67 protection and a 160 mm PVC cable with M8 three-pin connector. Standard ambient operation is −10 to +50 °C, with conditions specified for extended operation.

Slim laser retro-reflective sensor with 0–8 m PL80A range, 650 nm Class 1 emission, single-button teach-in and an NPN light-switching output.

Key Features

  • Laser retro-reflective sensing for small objects; polarized coaxial optics
  • 0–8 m sensing and 0–12 m maximum range with PL80A
  • 650 nm visible red Class 1 laser; typical Ø1 mm spot at 500 mm
  • No reflector minimum distance; single-button teach-in
  • NPN light-switching output, ≤100 mA
  • ≤0.5 ms response with resistive load; 1,000 Hz at 1:1 light/dark ratio
  • 10–30 V DC; 30 mA without load
  • 160 mm PVC cable with M8 three-pin connector; M3 threaded mounting holes
  • Novodur housing, PMMA front screen and IP66/IP67
  • Standard −10 to +50 °C operation; extended operation subject to conditions

Align a small laser spot across the target path and use NPN switching signals to support external counting or position checks.

Technical Specification Matrix

ParameterValue
Functional principleLaser photoelectric retro-reflective sensing; polarized coaxial/autocollimation optics
Sensing range0–8 m with PL80A reflector
Maximum sensing range0–12 m with PL80A reflector
Reflector minimum distanceNo minimum distance with coaxial optics
Polarization filterYes
Light sourceVisible red laser
Wavelength650 nm
Laser class1; EN 60825-1:2014, IEC 60825-1:2014 / CDRH 21 CFR 1040.10 and 1040.11
Light spot sizeTypically Ø1 mm at 500 mm
Laser service lifeAverage 50,000 h at ambient +25 °C
AdjustmentSingle teach-in button
Special applicationDetecting small objects
Digital outputNPN light-switching output; maximum output current ≤100 mA
Switching modeLight switching
Pin assignment1 BN=L+; 3 BU=M; 4 BK=Q (CD-045)
Response time≤0.5 ms signal transit time with resistive load
Switching frequency1,000 Hz at 1:1 light/dark ratio
Power supply10–30 V DC; operate in short-circuit protected supply network, maximum 8 A
Current consumption30 mA without load
Residual ripple<5 Vpp; remain within supply tolerances
Protection classIII
Circuit protectionA: supply reverse-polarity protection; B: inputs and output reverse-polarity protection; C: interference suppression
Housing designSlim, rectangular
Housing materialNovodur plastic
Front screenPMMA plastic
Connection160 mm PVC cable with male M8 three-pin connector; do not bend below 0 °C
Mounting provisionsM3 threaded mounting holes
IP ratingIP66/IP67
Operating temperatureStandard −10 to +50 °C
Extended operating temperature−30 to +55 °C, subject to cold-start and high-temperature conditions
Extended operation conditionsAt ambient ≥50 °C: maximum supply 24 V and maximum load current 50 mA. Below −10 °C, operation requires starting above −10 °C, then cooling with uninterrupted supply; switching on below −10 °C is not permitted.
Storage temperature−30 to +70 °C
MTTFD715 years, EN ISO 13849-1; Parts-Count calculation
Physical Weight (kg)0.1
Conductor cross-section0.14 mm²

Industrial Applications

1. Counting separated small opaque components

A feeder can align the sensor with a PL80A reflector so separated opaque components cross the laser path. The typical 1 mm spot at 500 mm helps place the beam on the intended blocking feature, while teach-in establishes sensitivity with actual parts. External counting logic verifies orientation, clear gaps and controller sampling against the 1,000 Hz switching specification at a 1:1 light/dark ratio.

Problem Solved

A component-passage reference helps external counting logic track separated parts, reducing reliance on target-reflected intensity after the actual blocking feature and component spacing have been verified.

Small components Laser alignment External counting

2. Confirming a narrow carrier feature at a transfer

A transfer station can place the sensor and reflector across a defined opaque feature on a carrier at its seated position. The coaxial optical arrangement has no reflector minimum distance, and single-button teach-in establishes the return threshold. External transfer logic evaluates the NPN light-switching state after testing real carrier tolerances, feature position and alignment throughout the expected mechanical variation.

Problem Solved

A local carrier-position reference helps external transfer control recognize arrival at the intended location, supporting coordinated upstream release when a narrow mechanical feature defines the required seated condition.

Carrier feature NPN light-switching Transfer position

3. Checking an opaque tab on a presented assembly

A machine can present an assembly so an expected opaque tab interrupts the reflected laser path while the surrounding opening leaves it clear. Setup aligns the beam using the specified spot at the chosen distance and teaches with representative complete and missing-tab samples. External inspection logic evaluates the switching state together with its presentation timing, after confirming that other assembly features cannot mask the tab condition.

Problem Solved

A tab-present reference helps external inspection logic flag an assembly with a missing blocking feature, reducing the chance that an expected component omission proceeds unnoticed to the next operation.

Opaque tab Assembly check Beam interruption
Select your currency