SICK 6041799 VTF180-2N41112 NPN Focused Diffuse Sensor

USD 67.34

VTF180-2N41112 offers focused red-light diffuse sensing, NPN output, 1–100 mm reference-target range, 1,000 Hz switching and a 2 m cable.

SKU SICK-6041799 Category
SICK V180-2

SICK VTF180-2N41112 NPN Focused Diffuse Sensor

BrandSICK
Model IdentifierVTF180-2N41112
Official Part Number6041799

Technical Overview

The SICK VTF180-2N41112 is an energetic photoelectric proximity sensor with focused visible-red optics and an NPN output. It evaluates light reflected by the target from one mounting side, avoiding a separate reflector or receiver across the detection area. The specified sensing range is 1–100 mm and the maximum range is 1–140 mm on a white reference target having 90% remission. A 645 nm LED forms an 8 mm spot at 100 mm, while a 270° potentiometer adjusts reception. Response of no more than 0.5 ms, 1,000 Hz switching, a 2 m cable and an IP67 nickel-plated brass and PC housing support machine integration.

Focused energetic sensor with 1–100 mm reference-target sensing, NPN output, 270° adjustment, 1,000 Hz switching and 2 m cable.

Key Features

  • Energetic diffuse photoelectric sensing
  • Focused optics with 645 nm visible red LED
  • 1–100 mm sensing range on 90% remission reference white
  • 1–140 mm maximum range on 90% remission reference white
  • Ø8 mm spot at 100 mm
  • 270° sensing-range potentiometer
  • NPN output; L/D control connection; open = light switching
  • Response ≤0.5 ms; 1,000 Hz switching
  • 2 m four-wire PVC cable; 0.18 mm² conductors
  • Axial M18 × 1 nickel-plated brass and PC housing; IP67; two nuts supplied

Define a local detection region with an 8 mm red-light spot at 100 mm, adjustable reception and an NPN signal for the machine controller.

Technical Specification Matrix

ParameterValue
Functional principleEnergetic photoelectric proximity sensor
Sensing range1–100 mm on 90% remission white target (DIN 5033)
Maximum sensing range1–140 mm on 90% remission white target (DIN 5033)
Light sourceLED, visible red light
Light spot sizeØ8 mm at 100 mm
AdjustmentPotentiometer, 270°, for sensing range
Optical axisAxial
Housing formCylindrical, M18 × 1
Power supply10–30 V DC; short-circuit-protected network max. 8 A
Residual ripple±10%; remain within supply-voltage limits
Current consumption30 mA without load
Switching outputNPN
Switching modeLight/dark switching, selectable via L/D control connection; control connection open = light switching L.ON
Output current≤100 mA
Response time≤0.5 ms with resistive load
Switching frequency1,000 Hz at light/dark ratio 1:1
Connection4-wire, 2 m PVC cable; do not bend below 0 °C
Circuit protectionSupply/input/output reverse-polarity protection and output overcurrent/short-circuit protection
Protection classIII
Housing materialMetal, nickel-plated brass and PC
Optics materialPMMA plastic
IP ratingIP67
Operating temperature−25 to +55 °C
Conductor cross-section0.18 mm²
Cable diameterØ3.8 mm
Dimensions L x W x H (cm)6.25 x 1.8 x 1.8
Physical Weight (kg)0.095
Wavelength645 nm
Special featureFocused optics
Items supplied2 fastening nuts
Storage temperature−40 to +70 °C
NPN signal voltage HIGH/LOWApproximately supply voltage / <1.8 V
MTTFD1,889 years
Diagnostic coverage DCavg0%

Industrial Applications

1. Checking a workpiece in a fixture

An assembly fixture can position the sensor toward the expected face of an opaque workpiece, with clear optical separation from surfaces behind the detection point. Energetic sensing evaluates reflected target light, and the potentiometer sets reception for the installed geometry. The NPN output supplies the local presence state to the sequence controller.

Problem Solved

A contactless workpiece signal identifies an occupied fixture for the controller, supporting assembly sequencing without a mechanical feeler pressing against the part at the sensing position.

Energetic sensing NPN Potentiometer

2. Counting separated components on a conveyor

A conveyor can aim the sensor at a position crossed by separated opaque parts so each target presents reflected light to the receiver. The 8 mm at 100 mm optical spot defines the monitored region, while the potentiometer adapts reception to the target and background geometry. The 1,000 Hz switching frequency supports repeated transitions within the documented timing limits.

Problem Solved

Discrete reflected-light transitions mark individual part passages without contact, giving the controller a count input when the installed geometry separates each target from the empty path.

Ø8 mm at 100 mm 1,000 Hz Diffuse sensing

3. Checking opaque strip continuity

A feeder can direct the sensor toward an opaque strip at a fixed monitoring position so reflected light indicates material present. A break or runout removes the target from that optical position and changes the NPN signal. IP67 protection supports exposed machine mounting, while the 2 m cable connects to local control wiring.

Problem Solved

A change in local material presence provides an electrical indication of interrupted strip feed, helping the controller coordinate a response before additional product enters the affected process section.

Material continuity IP67 NPN
Select your currency