SICK 1051783 GTE6-P1212 PNP Diffuse Sensor with Bracket

USD 45.76

GTE6-P1212 provides PNP diffuse sensing to 300 mm and 500 Hz switching, with a 2 m cable, IP67 housing and BEF-W100-A stainless steel bracket.

SKU SICK-1051783 Category
SICK G6

SICK GTE6-P1212 Diffuse Photoelectric Sensor

BrandSICK
Model IdentifierGTE6-P1212
Official Part Number1051783

Technical Overview

The SICK GTE6-P1212 is an energetic photoelectric proximity sensor with a PNP switching output and visible red PinPoint LED. It detects a target from reflected light, allowing the emitter and receiver to share one compact housing without a separate reflector. The specified sensing range is 15–250 mm, with a maximum 10–300 mm range on a white target with 90% remission. A five-turn mechanical spindle adjusts sensitivity, and selectable light/dark switching adapts the output logic. The sensor combines a response below 1.25 ms, a 500 Hz switching frequency, a 2 m connection cable and an IP67 ABS/PC housing for compact machine installations. A BEF-W100-A stainless steel mounting bracket is supplied.

PNP diffuse photoelectric sensor with 300 mm maximum sensing distance, 500 Hz switching, 2 m cable and IP67 housing.

Key Features

  • Energetic photoelectric proximity sensor with PNP switching output
  • PinPoint LED with 650 nm visible red light
  • Sensing range: 10 mm minimum; 300 mm maximum (target-dependent)
  • Light spot: Ø 7 mm at 90 mm
  • Sensitivity adjustment: Mechanical spindle, 5 turns
  • Selectable light/dark switching
  • Response < 1.25 ms; switching frequency 500 Hz
  • 10–30 V DC operation with protected switching output
  • 2 m PVC cable; IP67 ABS/PC housing
  • BEF-W100-A stainless steel (1.4301/304) mounting bracket supplied

Detect nearby targets from one mounting side with adjustable red-light sensing and a PNP switching signal.

Technical Specification Matrix

ParameterValue
Functional principleEnergetic photoelectric proximity sensor
Sensing range15–250 mm
Maximum sensing range10–300 mm on 90% remission white target (DIN 5033)
Light sourcePinPoint LED, visible red light
Wavelength650 nm
Light spot sizeØ 7 mm at 90 mm
AdjustmentMechanical spindle, 5 turns
Power supply10–30 V DC; short-circuit-protected network, max. 8 A
Residual ripple±10%; remain within supply-voltage limits
Current consumption30 mA, without load
Protection classIII
Switching outputPNP
Switching modeLight/dark switching; selectable via rotary selector
Output current≤ 100 mA; maximum 50 mA above 24 V supply
Response time< 1.25 ms with resistive load
Switching frequency500 Hz at light/dark ratio 1:1
Circuit protectionSupply and input/output reverse-polarity protection; output overcurrent and short-circuit protection
Housing formRectangular
Connection3-wire, 2 m cable; brown L+, blue M, black Q
Conductor cross-section0.14 mm²
Housing materialABS/PC plastic
Front screen materialPMMA plastic
Cable materialPVC plastic; do not bend below 0 °C
IP ratingIP67
Operating temperature−25 to +55 °C; temperature stability after adjustment ±10 °C
Storage temperature−40 to +70 °C
MountingM3 mounting holes
IndicatorsGreen supply-voltage LED; yellow received-light indicator
Output signal voltageSupply voltage minus ≤ 3 V / approximately 0 V (HIGH/LOW)
MTTFD1,896 years
Diagnostic coverage DCavg0%
Physical Weight (kg)0.06
Dimensions L x W x H (cm)2.1 x 1.2 x 3.15
Items suppliedBEF-W100-A stainless steel mounting bracket, material 1.4301/304

Industrial Applications

1. Part arrival at an assembly fixture

An assembly station needs a signal when an opaque component reaches its loading position. The energetic photoelectric sensor illuminates the target and evaluates the reflected red light from the same mounting side. Its five-turn sensitivity adjustment adapts detection to the installed target and distance, while the switching output reports arrival to the machine sequence.

Problem Solved

A single sensor body provides a contactless arrival signal where mounting a separate receiver is inconvenient, helping the controller start the next assembly step with the component present.

Energetic sensing Five-turn adjustment Red light

2. Opaque package counting on a short-range conveyor

A conveyor carrying separated opaque packages can use reflected-light detection to create an event as each package passes the sensing position. The 500 Hz switching frequency and response below 1.25 ms support distinct signal transitions within the specified timing limits. A visible red spot helps locate the detection point during installation without a receiver on the opposite side.

Problem Solved

Package passages become electrical switching events for a machine counter, while one-sided optical installation reduces the hardware needed across a narrow conveyor or enclosed transport path.

500 Hz < 1.25 ms One-sided sensing

3. Detecting a nearly empty parts chute

A parts feeder can monitor whether opaque components remain at a selected height in its supply chute. With a stable target surface and a clear optical view, reflected-light detection changes state when that location empties. Selectable light/dark switching supports the desired controller logic, and the IP67 housing protects the sensor at an exposed machine mounting point.

Problem Solved

A discrete presence signal at the selected chute height supports replenishment requests before the feed path empties completely, reducing reliance on repeated manual visual inspection.

IP67 Light/dark switching Parts presence
Select your currency