The uEye DirectShow Manual contains all the information you need for programming your own applications with your uEye camera and theDirectShow API. The uEye DirectShow interface is part of the comprehensive IDS Software Suite included with every uEye camera. In addition to the drivers, the IDS Software Suite includes the IDS Camera Manager, the uEye Cockpit and a Software Development Kit (SDK) for creating your own uEye programs. Demo applications make it easier to start uEye programming. For detailed information on your uEye camera please refer to the uEye Manual.
This version of the uEye DirectShow interface contains several new features and improvements. The key new functions are listed in the tables below.
New in version 4.97
Cameras & functions |
Description in chapter |
|---|---|
New option "boot boost" |
Installing without DirectShow service: Automatic camera recognition in DirectShow |
New in version 4.95
Cameras & functions |
Description in chapter |
|---|---|
New interface for the camera status |
Filter Interfaces: IuEyCameraStatus |
New in version 4.93
Cameras & functions |
Description in chapter |
|---|---|
New interface for the focus settings of the uEye LE USB 3.1 Gen 1 AF (active focus) |
Filter Interfaces: IuEyeAutoFocus |
New in version 4.91
Cameras & functions |
Description in chapter |
|---|---|
Interface enhancements for trigger functions |
Filter Interfaces: IuEyeTrigger |
New in version 4.90
Cameras & functions |
Description in chapter |
|---|---|
New interface for camera LUT |
Filter interfaces: IuEyeLUT The previous IuEyeCameraLUT filter interface is obsolete and is no longer documented. |
New in version 4.81
Cameras & functions |
Description in chapter |
|---|---|
New interface for long exposure and querying discrete pixel clocks |
Output Pin Interfaces: IuEyeCapturePinEx |
New interface for OpenMP support |
Filter Interfaces: IuEyeConfiguration |
|
Note for version 4.81 After updating the uEye DirectShow interface, compile your program again to avoid problems with the binary compatibility. |
New in version 4.60
Cameras & functions |
Description in chapter |
|---|---|
New interfaces for fully supporting the UI-3013XC |
IuEyeAntiFlicker IuEyeAutoContrast IuEyeFaceDetection IuEyeImageStabilization |
New in version 4.41
Cameras & functions |
Description in chapter |
|---|---|
Interface enhancements for AOI functions |
Filter Interfaces: IuEyeAOI |
Added image formats and XS functions to ISpecificPropertyPages |
New in version 4.32
Cameras & functions |
Description in chapter |
|---|---|
New interface for color conversion |
Filter Interfaces: IuEyeColorConverter |
Interface enhancements to control the lens correction of the XS |
Filter Interfaces: IuEyeColorTemperature |
Interface enhancements to control specific functions of the XS |
Filter Interfaces: IuEyeDeviceFeature |
New interface for the auto-focus function of the XS |
Filter Interfaces: IuEyeFocus |
New interface for the image formats of the uEye cameras |
Filter Interfaces: IuEyeImageFormat |
New interface for controlling the auto functions |
Filter Interfaces: IuEyeAutoParameter |
New interface for controlling the camera LUT |
Filter Interfaces: IuEyeCameraLUT |
New interface for controlling camera-specific functions |
Filter Interfaces: IuEyeDeviceFeature |
New interface for using the software edge filter |
Filter Interfaces: IuEyeEdgeEnhancement |
New interface for the correction of the sensor's hot pixels |
Filter Interfaces: IuEyeHotPixel |
New functions for setting the burst trigger mode are added |
Filter Interfaces: IuEyeTrigger |
New in version 4.00
Cameras & functions |
Description in chapter |
|---|---|
New interface for setting events |
Filter Interfaces: IuEyeEvent |
New interface for setting trigger and GPIO |
Filter Interfaces: IuEyeIO |
Updated description of IAMCameraControl |
New in version 3.90
Cameras & functions |
Description in chapter |
|---|---|
The maximum number of cameras is 24 now. |
|
The DirectShow service is installed and activated via the setup when you choose the complete installation. |
|
New HotPixel function integrated |
|
New interface for setting the scaler with the functions GetSensorScaler and SetSensorScaler |
|
New "Scaler" tab in the property pages |
Interfaces: ISpecifyPropertyPages |
When opening a camera a in the camera saved parameter set can be loaded automatically. |
Filter interfaces: ISpecifyPropertyPages |
New in version 3.82
Cameras & functions |
Description in chapter |
|---|---|
New interface for setting an area of interest (AOI) |
|
New interface for setting analog sensor gain |
|
Support for VideoProcAmp_Brightness and VideoProcAmp_Contrast |
|
Support for GetWhiteBalanceMultipliers and SetWhiteBalanceMultipliers |
New in version 3.80
Cameras & functions |
Description in chapter |
|---|---|
New interfaces for fully supporting the UI-1008XS-C |
IuEyeAntiFlicker IuEyeAutoBacklight IuEyeAutoContrast IuEyeDigitalZoom IuEyeFaceDetection IuEyeImageStabilization IuEyePhotometry IuEyeSaturation IuEyeScenePreset IuEyeSensorAWB IuEyeSharpness |
New interface for suppressing faults in trigger mode with GigE uEye cameras |
|
New Interface for setting a color temperature and a color space |
|
New Interface for supporting the flash function |
|
New Interface for setting the trigger signal (falling edge, rising edge, software trigger) Image capture in trigger mode for the UI-1008XS-C |
|
New Interface for supporting binning/subsampling |
|
New Interface for activating the automatic frame rate control |
|
Automatic registration of connected cameras |
|
Registration of the connected cameras with a camera name and serial number |
|
Automatic image mirroring |
Information in the manual |
Description in chapter |
|---|---|
Grouping all functions by the applicable interfaces |
