uEye DirectShow 4.97

Zoom window out
Larger text | Smaller text
Hide page header
Show expanding text
Print topic
Send mail feedback
Copy topic URL

Navigation: Interfaces > Filter interfaces

IuEyeFlash

IID_IuEyeFlash

This interface provides special functions for managing the camera inputs/outputs that are not covered by the DirectShow standard. The digital outputs can be used in either freerun or trigger mode. The output level can be synchronized with the exposure time or statically set. To use the interface, you must integrate the uEyeCaptureInterface.h header file into your project.

hint_info

These functions are not supported by the following camera models:

•UI-1007XS

IuEyeFlash provides the following functions:

Flash_SetStrobeMode	Sets the flash mode.
Flash_GetStrobeMode	Returns the set flash mode.
Flash_GetDuration	Returns the set flash duration.
Flash_GetDurationRange	Returns the range for the flash duration.
Flash_SetDelayDuration	Sets the flash delay and flash duration.
Flash_GetDelay	Returns the set flash delay.
Flash_GetDelayRange	Returns the range for the flash delay.
Flash_GetGlobalExposureWindow	Returns the time window for a global flash during which all sensor rows are simultaneously exposed.
Flash_GetSupportedGPIOPorts	Returns the programmable inputs/outputs (GPIO) that can be used for the flash function.
Flash_EnableGPIOPort	Enables a programmable input/output (GPIO) for the flash function.

Please enable JavaScript to view this site.

uEye DirectShow 4.97