USD 203.73
Electronic pressure switch for dry compressed air (-1 to 10 bar). Features 1/4″ NPT port, PNP/NPN/analog outputs, dual-color LCD, and IP65/IP67 rating.
Electronic pressure switch for dry compressed air (-1 to 10 bar). Features 1/4" NPT port, PNP/NPN/analog outputs, dual-color LCD, and IP65/IP67 rating.
| Parameter | Value |
|---|---|
| Medium | Dry compressed air |
| Pressure Type | Gauge pressure |
| Measuring Range | -1 bar to 10 bar |
| Overpressure Safety | 15 bar |
| Process Temperature | 0 °C to +60 °C |
| Accuracy | ≤ ± 1.5 % of the span |
| Output Signal | PNP/NPN/Push-Pull + 4 mA ... 20 mA / 0 V ... 10 V |
| Process Connection | 1/4" NPT female |
| Connection Type | M12 round connector x 1, 4-pin |
| Enclosure Rating | IP65, IP67 |
| Supply Voltage | 17 V DC to 30 V DC |
| Physical Weight (kg) | 0.04 |
| Dimensions L x W x H (cm) | 3.5 x 3.5 x 6.3 |
Utilizes the -1 to 10 bar measurement range and dual-color LCD to ensure automated manufacturing lines maintain optimal compressed air levels.
Prevents system under-pressurization, which can lead to incomplete actuator strokes or clamping failures in critical pneumatic equipment.
Leverages the negative pressure measurement capabilities down to -1 bar to verify the presence of a sufficient vacuum before initiating robotic lifting sequences.
Eliminates the risk of dropping heavy or delicate workpieces by supplying instant digital output confirmation of vacuum strength to the system PLC.
Integrates the continuous 4-20 mA analog signal into variable frequency drive (VFD) controls to modulate compressor speed based on real-time plant air demand.
Optimizes plant energy consumption by continuously matching compressor output precisely to the actual air requirement instead of operating on inefficient basic on/off thresholds.
