WL2SGC-2P3234A00 Miniature Photoelectric Sensors – SICK Sensor
$ 181.94
SICK sensor one of the world’s leading producers of sensors and sensor solutions for industrial applications. SICK is a technology and market leader in Factory and Logistics Automation as well as Process Automation. The sensor range are: Laser Sensors, Cylinder Sensors, Photoelectric Sensors, Fork Sensors, Encoders, Color Sensors, Distance Sensor, Contrast Sensor, Color Sensor, Inductive Proximity Sensors, Fiber Optic Sensor with our signature range sick sensor intelligence.
Part Number:1063648
Photoelectric Sensor Model:WL2SGC-2P3234A00
OEM Spec Ref
Features
| Sensor/ detection principle | Photoelectric retro-reflective sensor, autocollimation |
| Dimensions (W x H x D) | 7.7 mm x 21.8 mm x 13.5 mm |
| Housing design (light emission) | Rectangular |
| Sensing range max. | 0 m … 1.2 m 1) |
| Sensing range | 0 m … 0.55 m 1) |
| Type of light | Visible red light |
| Light source | PinPoint LED 2) |
| Light spot size (distance) | Ø 12 mm (250 mm) |
| Wave length | 640 nm |
| Adjustment | IO-Link |
| Diagnosis | Device contamination monitoring, Quality of teach-in |
| Pin 2 configuration | External input, Teach-in input, Sender off input, Detection output, logic output, Device contamination alarm output |
| AutoAdapt | ✔ |
| Special applications | Detecting transparent objects |
| IO-Link functions | Standard functions |
| Special features | Detecting transparent objects |
- 1) Reflector P250F.
- 2) Average service life: 100,000 h at TU = +25 °C.
Mechanics/electronics
| Supply voltage | 10 V DC … 30 V DC 1) |
| Ripple | ≤ 5 Vpp 2) |
| Current consumption | 20 mA 3) |
| Switching output | PNP |
| Switching mode | Light/dark switching |
| Output current Imax. | < 50 mA |
| Response time | < 0.5 ms 4) |
| Response time Q/ on Pin 2 | 300 µs … 450 µs 4) 5) |
| Switching frequency | 1,000 Hz |
| Switching frequency Q / to pin 2 | 1,000 Hz 5) 6) |
| Connection type | Cable with M8 male connector, 4-pin, 200 mm 7) |
| Cable material | PVC |
| Cable diameter | Ø 3 mm |
| Circuit protection | A 8)
B 9) D 10) |
| Protection class | III |
| Polarisation filter | ✔ |
| IO-Link | ✔ |
| Transmission rate | COM2 |
| Housing material | Plastic, ABS/PC |
| Optics material | Plastic, PMMA |
| Enclosure rating | IP67 |
| Special feature | Detecting transparent objects |
| Ambient operating temperature | –20 °C … +50 °C |
| Ambient storage temperature | –40 °C … +75 °C |
| UL File No. | NRKH.E181493 |
| Repeatability Q/ on Pin 2: | 150 µs |
- 1) Limit values.
- 2) May not exceed or fall below Uv tolerances.
- 3) Without load.
- 4) Signal transit time with resistive load.
- 5) Valid for Q on Pin2, if configured with software.
- 6) With light/dark ratio 1:1.
- 7) Do not bend below 0 °C.
- 8) A = VS connections reverse-polarity protected.
- 9) B = output reverse-polarity protected.
- 10) D = outputs overcurrent and short-circuit protected.
Safety-related parameters
| MTTFD | 1,987 years |
| DCavg | 0% |
Communication interface
| Communication interface | IO-Link V1.1 |
| Communication Interface detail | COM2 (38,4 kBaud) |
| Cycle time | 2.3 ms |
| Process data length | 16 Bit |
| Process data structure | Bit 0 = switching signal QL1
Bit 1 = switching signal QL2 Bit 2 … 15 = empty |
| VendorID | 26 |
| DeviceID HEX | 0x800124 |
| DeviceID DEC | 8388900 |
Smart Task
| Smart Task name | Base logics |
| Logic function | Direct
AND OR WINDOW Hysteresis |
| Timer function | Deactivated
On delay Off delay ON and OFF delay Impulse (one shot) |
| Inverter | Yes |
| Switching frequency | SIO Direct: 1000 Hz
SIO Logic: 1000 Hz IOL: 900 Hz |
| Response time | SIO Direct: 300 µs … 450 µs 1)
SIO Logic: 500 µs … 600 µs 2) IOL: 500 µs … 900 µs 3) |
| Repeatability | SIO Direct: 150 µs 1)
SIO Logic: 150 µs 2) IOL: 400 µs 3) |
| Switching signal QL1 | Switching output |
| Switching signal QL2 | Switching output |
- 1) SIO Direct: sensor operation in standard I/O mode without IO-Link communication and without using internal sensor logic or time parameters (set to “direct”/”deactivated”).
- 2) SIO Logic: Sensor operation in standard I/O mode without IO-Link communication. Sensor-internal logic or timing parameters plus Automation Functions used.
- 3) IOL: Sensor operation with full IO-Link communication and usage of logic, timing and Automation Function parameters.
