| Valve function |
3/2, closed, monostable |
| Actuation type |
Electrical |
| Width |
65 mm |
| Standard nominal flow rate |
1050 l/min |
| Pneumatic working port |
G1/4 |
| Operating voltage |
24V DC |
| Operating pressure |
0.3 MPa … 1 MPa |
| Operating pressure |
3 bar … 10 bar |
| Structural design |
Piston gate valve |
| Reset method |
Mechanical spring |
| Degree of protection |
IP65
NEMA 4 |
| Certification |
c UL us – Recognized (OL) |
| KC characters |
KC EMC |
| CE marking (see declaration of conformity) |
As per EU EMC directive
as per EU machinery directive |
| UKCA marking (see declaration of conformity) |
To UK instructions for EMC
To UK instructions for machines |
| Certificate issuing authority |
UL MH19482 |
| Exhaust air function |
With flow control option |
| Sealing principle |
Soft |
| Mounting position |
Any |
| Conforms to standard |
EN 60947-5-2 |
| Manual override |
None |
| Type of control |
Pilot-controlled |
| Pilot air supply port |
Internal |
| Flow direction |
Non-reversible |
| Symbol |
00997336 |
| Measuring principle |
Inductive |
| Lap |
Overlap |
| Sensor reverse polarity protection |
For all electrical connections |
| Safety function |
Exhausting
Tamper protection, protection against unexpected start-up |
| Performance Level (PL) |
Exhaust/up to category 4, performance level e
Protection against manipulation, protection against unexpected start-up/up to category 4, performance level e |
| Note on forced dynamization |
Switching frequency at least once a week |
| Signal status display |
With accessories |
| Switching position sensing |
Normal position with sensor |
| Sensor switching status indication |
LED |
| Pilot pressure MPa |
0.3 MPa … 1 MPa |
| Pilot pressure |
3 bar … 10 bar |
| Suitability for vacuum |
no |
| Standard flow rate exhaust 6-> 0 bar |
2650 l/min |
| Standard flow rate exhaust 6 -> 0 bar in the event of a fault |
1050 l/min |
| Switching time off |
54 ms |
| On switching time |
24 ms |
| Pneumatic valve – sensor ON switching time |
58 ms |
| Pneumatic valve – sensor switching time off |
11 ms |
| Duty cycle |
100% |
| Max. positive test pulse with 0 signal |
1000 µs |
| Max. negative test pulse on 1 signal |
800 µs |
| Switching output |
PNP |
| Coil characteristics |
24 V DC: 1.8 W |
| Permissible voltage fluctuations |
-15 % / +10 % |
| Operating medium |
Compressed air as per ISO 8573-1:2010 [7:4:4] |
| Information on operating and pilot media |
Operation with oil lubrication possible (required for further use) |
| Vibration resistance |
Transport application test with severity level 2 as per FN 942017-4 and EN 60068-2-6 |
| Shock resistance |
Shock test with severity level 2 as per FN 942017-5 and EN 60068-2-27 |
| Corrosion resistance class (CRC) |
0 – No corrosion stress |
| LABS (PWIS) conformity |
VDMA24364-B1/B2-L |
| Max. magnetic interference field |
60 mT |
| Temperature of medium |
-5 °C … 50 °C |
| Noise level |
85 dB(A) |
| Protection against direct and indirect contact |
PELV
Protection class as per EN 60950/IEC 950 |
| Pilot medium |
Compressed air as per ISO 8573-1:2010 [7:4:4] |
| Ambient temperature |
-5 °C … 50 °C |
| Nominal altitude of use above sea level |
1000 m as per VDE 0580 |
| Product weight |
1134 g |
| DC sensor operating voltage range |
10 V … 30 V |
| Sensor short circuit protection |
Pulsed |
| Sensor idle current |
≤10 mA |
| Max. output current, sensor |
200 mA |
| Sensor max. switching frequency |
5000 Hz |
| Sensor residual ripple |
± 10 % |
| Sensor voltage drop |
≤2 V |
| Electrical connection |
Form C
as per EN 175301-803
Without PE conductor |
| Sensor connection |
Plug
3-pin
M8x1 |
| Type of mounting |
With through-hole |
| Pneumatic connection 1 |
G1/4 |
| Pneumatic connection 2 |
G¼ |
| Pneumatic connection 3 |
G1/4 |
| Note on materials |
RoHS-compliant |
| Seals material |
FPM
HNBR
NBR |
| Housing material |
Die-cast aluminum
PA |
| Material of screws |
Steel, galvanized |
| Switching element function |
N/C contact |
