Main
Part Number	LP4K0910BW3	LP4K0910BW3
Product Series	TeSys K	TeSys K
Product Series	TeSys	TeSys K
product type	Contactor	Contactor
product short name	LP4K	LP4K
Application field of contactor	Applied to AC loads with power factor greater than or equal to 0.95	Applied to non-inductive or micro-inductive loads, and resistance furnaces to AC loads with a power factor greater than or equal to 0.95
use category	AC-3 AC-4 AC-3e	AC-3 AC-4 AC-1 AC-3e
number of poles	3P	3P
Loop contact type	3 NO	3 NO
Rated operating current [Ie]	6 A at <= 440 V AC AC-3 for power circuits 6 A at <= 440 V AC AC-3e for power circuits	20 A 50 °C) at <= 440 V AC AC-1 for power circuit 9 A at <= 440 V AC AC-3 for power circuit 16 A at 70 °C) at 690 V AC AC- 1 for power circuit 9 A at <= 440 V AC AC-3e for power circuit
Auxiliary contact type	1 NO	1 NO
Additional information
Surge Suppression Module	Built-in bidirectional peak current limiting diode	Built-in bidirectional peak current limiting diode
Auxiliary contact type	Type Momentary 1 NO	1 NO
Control voltage limit	Operating: 0.7…1.30 Uc 50 °C) Release: 0.1…0.7 Uc 50 °C)	Operating: 0.7…1.30 Uc 50 °C) Release: 0.1…0.7 Uc 50 °C)
Rated insulation voltage [Ui]	Power circuit: 600 V conforming to UL 508 Power circuit: 690 V conforming to IEC 60947-4-1 Signaling circuit: 690 V conforming to IEC 60947-4-1 Signaling circuit: 690 V conforming to IEC 60947-5-1 Signaling circuit: 600 V conforming UL 508 Power Circuit: 600 V per CSA C22.2 No 14 Signal Circuit: 600 V per CSA C22.2 No 14	Power circuit: 600 V conforming to UL 508 Power circuit: 690 V conforming to IEC 60947-4-1 Signaling circuit: 690 V conforming to IEC 60947-4-1 Signaling circuit: 690 V conforming to IEC 60947-5-1 Signaling circuit: 600 V conforming UL 508 Power Circuit: 600 V per CSA C22.2 No 14 Signal Circuit: 600 V per CSA C22.2 No 14
Rated impulse withstand voltage [Uimp]	8kV	8kV
Overvoltage category	III	III
installation method	Chassis mounting rail installation	Chassis mounting rail installation
flame retardant	V1 Conforms to UL 94 requirements2 Conforms to NF F 16-101 requirements2 Conforms to NF F 16-102	V1 Conforms to UL 94 requirements2 Conforms to NF F 16-101 requirements2 Conforms to NF F 16-102
Tightening torque	0.8…1.3 Nm Bolting No 2 Phillips screw 0.8…1.3 Nm Bolting Ø 6 Flat 0.8…1.3 Nm Bolting pozidriv No 2	0.8…1.3 Nm Bolting No 2 Phillips screw 0.8…1.3 Nm Bolting Ø 6 Flat 0.8…1.3 Nm Bolting pozidriv No 2
Rated working voltage [Ue]	Power circuit: 690 V AC 50/60 Hz Signal circuit: <= 690 V AC 50/60 Hz	Power circuit: 690 V AC 50/60 Hz Signal circuit: <= 690 V AC 50/60 Hz
Conventional thermal current [Ith]	20 A at <50 °C for power circuits 10 A at <50 °C for signal circuits	20 A at <50 °C for power circuits 10 A at <50 °C for signal circuits
Rated making capacity [Irms]	110 A AC for power circuits according to NF C 63-110 110 A AC for power circuits according to IEC 60947 110 A AC for signal circuits according to IEC 60947	110 A AC for power circuits according to NF C 63-110 110 A AC for power circuits according to IEC 60947 110 A AC for signal circuits according to IEC 60947
Rated breaking capacity	110 A at 415 V conforming to IEC 60947 110 A at 440 V conforming to IEC 60947 80 A at 500 V conforming to IEC 60947 110 A at 220…230 V conforming to IEC 60947 110 A at 380 …400 V conforming to IEC 60947 70 A at 660…690 V conforming to IEC 60947	110 A at 415 V conforming to IEC 60947 110 A at 440 V conforming to IEC 60947 80 A at 500 V conforming to IEC 60947 110 A at 220…230 V conforming to IEC 60947 110 A at 380 …400 V conforming to IEC 60947 70 A at 660…690 V conforming to IEC 60947
Fuses for use with relays	25 A gG at <= 440 V for power circuits 25 A aM for power circuits 10 A gG for signal circuits according to IEC 60947 10 A gG for signal circuits according to VDE 0660	25 A gG at <= 440 V for power circuits 25 A aM for power circuits 10 A gG for signal circuits according to IEC 60947 10 A gG for signal circuits according to VDE 0660
average impedance	3 mΩ – Ith 20 A 50 Hz for power circuits	3 mΩ – Ith 20 A 50 Hz for power circuits
Surge power (W)	1.8W (20°C)	1.8W (20°C)
Holding power consumption(W)	1.8 W at 20 °C	1.8 W at 20 °C
action time	10…20 ms coil discharge and NO opening 30…40 ms coil energize and NO contact close	10…20 ms coil discharge and NO opening 30…40 ms coil energize and NO contact close
Safety and reliability level	B10d = Contactor for 1369863 nominal loads according to EN/ISO 13849-1 B10d = Contactor for 20000000 mechanical loads according to EN/ISO 13849-1	B10d = Contactor for 1369863 nominal loads according to EN/ISO 13849-1 B10d = Contactor for 20000000 mechanical loads according to EN/ISO 13849-1
Mechanical life	30 Mcycles	30 Mcycles
operating frequency	3600 times/hour	3600 times/hour
Minimum switching current [Imin]	5 mA for signal loop	5 mA for signal loop
Minimum switching voltage	17 V for signal return	17 V for signal return
Insulation resistance	> 10 MΩ for signal loops	> 10 MΩ for signal loops
high	58 mm	58 mm
width	45 mm	45 mm
depth	57 mm	57 mm
Product Weight	0.235 kg	0.235 kg
environment
certified product	UL CSA UKCA	UL CSA UKCA
operating temperature	-25…50°C	-25…50°C
storage environment temperature	-50…80 °C	-50…80 °C
working altitude	2000 meters without	2000 meters without
packaging unit
Unit Type of Package 1	PCE	PCE
Number of Units in Package 1	1	1
Package 1 Height	5cm	4.8cm
Package 1 Width	6cm	6.2 cm
Package 1 Length	6.5cm	6.6cm
Package 1 Weight	221g	220.0g
Unit Type of Package 2	S02	S02
Number of Units in Package 2	40	40
Package 2 Height	15cm	15.0cm
Package 2 Width	30cm	30.0cm
Package 2 Length	40cm	40.0cm
Package 2 Weight	9.094kg	9.255 kg
Unit Type of Package 3	P06	P06
Number of Units in Package 3	640	640
Package 3 Height	75cm	77.0cm
Package 3 Width	80cm	80.0cm
Package 3 Length	60cm	60.0cm
Package 3 Weight	153.504kg	156.58kg
contract warranty
Warranty	18 months	18 months