The MOXA TCF-142-M-ST is a sophisticated Serial-to-Fiber Converter that ensures reliable serial communication over fiber optic links. Designed to extend serial transmission distance up to 5 km at 9600 bps, this converter supports a multitude of network structures, including point-to-point and daisy chain topologies, making it an ideal choice for industrial environments where electromagnetic interference and ground loop issues are a concern.

Key Features:

RS-232/422/485 Flexibility: Easily switch between different serial interfaces (RS-232, RS-422, RS-485), catering to a variety of industrial applications without the need for additional converters.
Rugged Design: Engineered to withstand industrial environments with a wide operating temperature range of -40 to 75°C, ensuring performance stability under extreme conditions.
Extended Transmission Distance: Capable of extending serial communications up to 5 km at 9600 bps, or up to 40 km at lower baud rates using single-mode models, enhancing connectivity across large sites.
Easy Installation and Configuration: Comes with a DIN-rail mounting kit and built-in termination resistors for easy setup and integration into existing systems.
Optical Isolation Protection: Offers 2 kV optical isolation for serial signals, providing enhanced protection against voltage spikes and surges.

Benefits:

Enhanced Data Integrity: Optical fiber eliminates noise and interference in data transmission, significantly improving the integrity and security of the data.
Increased System Uptime: Robust construction and optical isolation minimize downtime caused by electrical noise and other interference in harsh industrial environments.
Flexible Network Integration: Supports a variety of fiber connectors and single-mode or multi-mode fiber options, facilitating seamless integration into different network infrastructures.
Cost-Effective Maintenance: Reduces potential costs and disruptions related to electrical damage and signal degradation over long distances.
Scalability: Easy to scale with network demands, supporting point-to-point and daisy chain configurations to meet growing industrial requirements.

Applications:

Industrial Automation: Vital for systems requiring reliable, long-distance communication in automated production lines.
Traffic Management Systems: Ensures robust and uninterrupted data transmission in intelligent transportation systems, particularly in traffic signal control and monitoring.
Utility Networks: Plays an essential role in the secure and reliable operation of electric, water, and gas utilities where long-distance communication is crucial.
Marine and Offshore Platforms: Provides reliable data communications in marine environments where salt, moisture, and temperature fluctuations pose significant challenges.
Surveillance Systems: Ideal for security and surveillance systems where long-distance, interference-free transmission is necessary for high-quality video and data streaming.

The MOXA TCF-142-M-ST Serial-to-Fiber Converter stands out as a reliable and versatile solution, specifically engineered to enhance communication in diverse industrial scenarios, ensuring data integrity and system reliability across extensive operational landscapes.

Specification

Serial Interface	No. of Ports	2
	Serial Standards	RS-232 RS-422 RS-485
	Baudrate	50 bps to 921.6 kbps (supports non-standard baudrates)
	Flow Control	ADDC (automatic data direction control) for RS-485
	Optical Fiber	Refer Table 2
	Pull High/Low Resistor for RS-485	1 kilo-ohm, 150 kilo-ohms
	RS-485 Data Direction Control	ADDC (automatic data direction control)
	Terminator for RS-485	N/A, 120 ohms, 120 kilo-ohms
	Connector	Multi-mode ST connector
	Latency	300 ns
Serial Signals	RS-232	TxD, RxD, GND
	RS-422	Tx+, Tx-, Rx+, Rx-, GND
	RS-485-4w	Tx+, Tx-, Rx+, Rx-, GND
	RS-485-2w	Data+, Data-, GND
Power Parameters	No. of Power Inputs	1
	Input Current	70 to 140 mA @ 12 to 48 VDC
	Input Voltage	12 to 48 VDC
	Overload Current Protection	Supported
	Power Connector	Terminal block
	Power Consumption	70 to 140 mA @ 12 to 48 VDC
	Reverse Polarity Protection	Supported
Physical Characteristics	IP Rating	IP30
	Housing	Metal
	Dimensions (with ears)	90 x 100 x 22 mm (3.54 x 3.94 x 0.87 in)
	Dimensions (without ears)	67 x 100 x 22 mm (2.64 x 3.94 x 0.87 in)
	Weight	320 g (0.71 lb)
	Installation	Wall mounting
Environmental Limits	Operating Temperature	0 to 60°C (32 to 140°F)
	Storage Temperature (package included)	-40 to 85°C (-40 to 185°F)
	Ambient Relative Humidity	5 to 95% (non-condensing)
Standards and Certifications	EMC	EN 55032/35
	EMI	CISPR 32, FCC Part 15B Class A
	EMS	IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m IEC 61000-4-4 EFT: Power: 1 kV IEC 61000-4-5 Surge: Power: 1 kV IEC 61000-4-6 CS: 3 V IEC 61000-4-8 PFMF
	Environmental Testing	IEC 60068-2-1 IEC 60068-2-2 IEC 60068-2-3
	Safety	UL 60950-1
	Vibration	IEC 60068-2-6
MTBF	Time	780,480 hrs
MTBF	Standards	Telcordia (Bellcore), GB
Warranty	Warranty Period	5 years
Warranty	Details	See www.moxa.com/warranty

Optical Fiber

		Multi-Mode	Single-Mode
Fiber Cable Requirements		50/125 µm, 800 MHz	G.652
		62.5/125 µm, 500 MHz
Typical Distance		5 km	40km
Wavelength	Typical (nm)	850	1310
	TX Range (nm)	840 to 860	1290 to 1330
	RX Range (nm)	800 to 900	1100 to 1650
Optical Power	TX Range (dBm)	0 to -5	0 to -5
	RX Range (dBm)	0 to -20	0 to -25
	Link Budget (dB)	15	20
	Dispersion Penalty (dB)	1	1