Out of Stock

TB 6-RTK N- Test Disconnect – 3001605(50 pcs) – Phoenix Contact Terminal Block

$ 58.65

Out of stock

SKU: Phoenix Contact 3001605

Out of stock

Inosaki is one of the largest Phoenix Contact Distributors to provide terminal block, interface module, power supply and relay. And our best offer for terminal block types are Feed-through, Fuse Modular, Spring Cage, Double Level, and Multi-level, hence the series model references to  PT Series, ST Series, TB Series, UT Series, UK Series. In additional for power supply are QUINT Power, STEP Power, Trio Power, and UNO Power. Please email us for catalog: sales@inosaki.my

Test disconnect terminal block, with two test sockets for 4 mm test plugs, or for receiving bridge bars or screw bridges, connection method: Screw connection, cross section: 1 mm2 – 6 mm2 , AWG: 18 – 10, width: 8.2 mm, mounting type: NS 35/7,5, NS 35/15, NS 32,

General

Article Number 3001605
Number of levels 1
Number of connections 2
Potentials 1
Nominal cross section 6 mm²
Color dark gray
Insulating material PA
Flammability rating according to UL 94 V0
Mounting type NS 35/7,5
NS 35/15
NS 32
Rated surge voltage 6 kV
Degree of pollution 3
Overvoltage category III
Insulating material group I
Maximum load current 57 A (with 10 mm² conductor cross section)
Nominal current IN 41 A (with 6 mm² conductor connection)
Nominal voltage UN 500 V
Open side panel Yes
Shock protection test specification DIN EN 50155 (VDE 0115-200):2008-03
Back of the hand protection guaranteed
Finger protection guaranteed
Result of surge voltage test Test passed
Surge voltage test setpoint 7.3 kV
Result of power-frequency withstand voltage test Test passed
Result of the test for mechanical stability of terminal points (5 x conductor connection) Test passed
Result of flexion and pull-out test Test passed
Bending test rotation speed 10 rpm
Bending test turns 135
Bending test conductor cross section/weight 1 mm² / 0.4 kg
6 mm² / 1.4 kg
Tensile test result Test passed
Tractive force setpoint 10 N
Conductor cross section tensile test 2.5 mm²
Tractive force setpoint 50 N
Conductor cross section tensile test 4 mm²
Tractive force setpoint 60 N
Result of tight fit on support Test passed
Tight fit on carrier NS 35
Result of voltage-drop test Test passed
Requirements, voltage drop U1 ≤ 3.2 mV; U2 ≤ 1.5 x U1
Result of temperature-rise test Test passed
Requirement temperature-rise test Increase in temperature ≤ 45 K
Short circuit stability result Test passed
Conductor cross section short circuit testing 2.5 mm²
Short-time current 0.3 kA
Result of thermal test Test passed
Proof of thermal characteristics (needle flame) effective duration 30 s
Result of aging test Test passed
Ageing test for screwless modular terminal block temperature cycles 192
Oscillation, broadband noise test result Test passed
Test specification, oscillation, broadband noise DIN EN 50155 (VDE 0115-200):2018-05
Test spectrum Service life test category 2, bogie-mounted
Test frequency f1 = 5 Hz to f2 = 250 Hz
ASD level 6.12 (m/s²)²/Hz
Acceleration 3.12g
Test duration per axis 5 h
Test directions X-, Y- and Z-axis
Shock test result Test passed
Shock form Half-sine
Acceleration 0.58g
Shock duration 30 ms
Number of shocks per direction 3
Test directions X-, Y- and Z-axis (pos. and neg.)
Ambient temperature (operation) -60 °C … 105 °C (max. short-term operating temperature 130°C)
Ambient temperature (storage/transport) -25 °C … 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Ambient temperature (assembly) -5 °C … 70 °C
Ambient temperature (actuation) -5 °C … 70 °C
Permissible humidity (storage/transport) 30 % … 70 %

Dimensions

Width 8.2 mm
End cover width 2.2 mm
Height NS 35/15 55 mm
Height NS 35/7,5 47.5 mm
Height 2.028 “
Height NS 32 52.5 mm
Length 73 mm

 

Connection data

Connection 1 level
Grounding foot No
Nominal cross section 6 mm²
Maximum load current 57 A (with 10 mm² conductor cross section)
esignation Level 1 above 1 below 1
Connection labeling 1 level
Screw thread M4
Note Terminal point
Tightening torque 1.4 … 1.5 Nm
Stripping length 10 mm
Internal cylindrical gage A5
Connection in acc. with standard IEC 60947-7-1
Conductor cross section solid 1 mm² … 6 mm²
Cross section AWG 18 … 10
Conductor cross section flexible 1 mm² … 6 mm²
Conductor cross section, flexible [AWG] 18 … 10
Flexible conductor cross section flexible (ferrule, w/o plastic sleeve) 1 mm² … 6 mm²
Flexible conductor cross section (ferrule with plastic sleeve) 1 mm² … 6 mm²
Nominal current 41 A (with 6 mm² conductor connection)
Maximum load current 41 A (with 6 mm² conductor connection)
Nominal voltage 500 V
Nominal cross section 6 mm²

Related products