1. Guided Short-Stroke Part Transfer
An assembly station moves a handling attachment between two nearby locations across a 25 mm travel path. The pneumatic yoke drive provides movement in both directions, while the ball bearing cage guide supports the slide. The unit combines these functions in one assembly, with 121 N theoretical advance force and 104 N theoretical return force at 6 bar.
Problem Solved
Integrated pneumatic actuation and ball bearing cage guidance provide a supported transfer path, combining the required stroke and carriage guidance within the same slide assembly.
25 mm stroke
Ball bearing cage guide
Double-acting
2. Supporting an Offset Fixture Attachment
A moving fixture attachment places transverse force and moments on its short-stroke actuator. This slide incorporates a ball bearing cage guide with published maximum Fy and Fz forces of 410 N, plus separate Mx, My and Mz limits. These guide characteristics provide a documented basis for evaluating the attachment geometry while the pneumatic drive supplies its 25 mm movement.
Problem Solved
Integrated cage guidance supports the moving attachment and provides explicit force and moment limits, allowing the fixture load case to be assessed against the slide's documented mechanical capability.
410 N Fy/Fz
2.5 Nm Mx/My
1.4 Nm Mz
3. Position-Observed Stop Insertion
An assembly fixture inserts a mechanical stop and then withdraws it before the next transfer. This mini slide provides a 25 mm double-acting movement and proximity-switch position detection for coordinating the stop with the machine sequence. Elastic cushioning rings or plates act at both ends, while M5 connections and through-hole mounting provide the installation interfaces.
Problem Solved
Proximity-switch compatibility provides a means to observe the stop actuator's position, while powered advance and return move it between the working and clearance states of the machine sequence.
Proximity-switch detection
25 mm stroke
Elastic end cushioning