$ 1,546.29
| Part Number | 6ES7326-2BF01-0AB0 |
| Supply voltage | |
| Rated value (DC) | 24 V; 1L+ |
| Reverse polarity protection | Yes |
| Load voltage L+ | |
| ● Rated value (DC) | 24 V; 2L+, 3L+ |
| ● Reverse polarity protection | No |
| Input current | |
| from supply voltage 1L+, max. | 70 mA |
| from load voltage 2L+ (without load), max. | 100 mA |
| from load voltage 3L+ (without load), max. | 100 mA |
| from backplane bus 5 V DC, max. | 100 mA |
| Power loss | |
| Power loss, typ. | 12 W |
| Digital outputs | |
| Number of digital outputs | 10 |
| Short-circuit protection | Yes |
| Limitation of inductive shutdown voltage to | L+ (-53 V) without series diode, L+ (-33 V) with series diode |
| Switching capacity of the outputs | |
| ● on lamp load, max. | 5 W |
| Output voltage | |
| ● for signal “1”, min. | L+ (-1 V) without series diode, L+ (-1.8 V) with series diode |
| Output current | |
| ● for signal “1” rated value | 2 A 7 mA |
| ● for signal “1” permissible range for 0 to 40 °C, min. | |
| ● for signal “1” permissible range for 0 to 40 °C, max. | 2 A; 2 A for horizontal installation, 1 A for vertical installation |
| ● for signal “1” permissible range for 40 to 60 °C, min. | 7 mA |
| ● for signal “1” permissible range for 40 to 60 °C, max. | 1 A; for horizontal installation |
| ● for signal “0” residual current, max. | 0.5 mA |
| Switching frequency | |
| ● with resistive load, max. | 10 Hz |
| ● with inductive load, max. | 2 Hz |
| ● on lamp load, max. | 10 Hz |
| Total current of the outputs (per group) | |
| horizontal installation | |
| — up to 40 °C, max. | 7.5 A; without series diode, 5 A with series diode |
| — up to 60 °C, max. | 5 A; without series diode, 4 A with series diode |
| vertical installation | |
| — up to 40 °C, max. | 5 A; without series diode, 4 A with series diode |
| Cable length | |
| ● shielded, max. | 1 000 m; 200 m for SIL 3, AK 6, Cat 4 |
| ● unshielded, max. | 600 m |
| Interrupts/diagnostics/status information | |
| Alarms | |
| ● Diagnostic alarm | Yes |
| Diagnoses | |
| ● Diagnostic information readable | Yes |
| Diagnostics indication LED | |
| ● Fail-safe operation | Yes |
| ● Group error SF (red) | Yes |
| Potential separation | |
| Potential separation digital outputs | |
| ● between the channels | Yes |
| ● between the channels, in groups of | 5 |
| ● between the channels and backplane bus | Yes |
| ● between the channels and the power supply of the electronics | Yes |
| Isolation | |
| Isolation tested with | 500 V DC/350 V AC |
| Standards, approvals, certificates | |
| Highest safety class achievable in safety mode | |
| ● acc. to DIN VDE 0801 | AK 5 and 6 |
| ● acc. to EN 954 | Cat. 4 |
| ● Performance level according to ISO 13849-1 | e |
| ● SIL acc. to IEC 61508 | SIL 3 |
| connection method / header | |
| required front connector | 40-pin |
| Dimensions | |
| Width | 80 mm |
| Height | 125 mm |
| Depth | 120 mm |
| Weights | |
| Weight, approx. | 465 g |
