$ 111.54 – $ 204.82
The new S7-200 SMART has two different types of CPU modules, i.e. standard type and compact type.
Standard type CPU is expandable with I/O expansion modules and signal boards. Compact type CPUs are non expandable with I/O expansion modules and signal boards.
Model | EM DR16 | EM DT16 | EM DR32 | EM DT32 | ||
Order No.: (MLFB) | 6ES7 288-2DR16-0AA0 | 6ES7 288-2DT16-0AA0 | 6ES7 288-2DR32-0AA0 | 6ES7 288-2DT32-0AA0 | ||
Dimension W x H x D (mm) | 45 x 100 x 81 | 70 x 100 x 81 | ||||
Weight | 201.9 g | 179.7 g | 295.4 g | 257.3 g | ||
Power consumption | 5.5 W | 2.5 W | 10 W | 4.5 W | ||
Current consumption (SM bus) | 145 mA | 145 mA | 180 mA | 185 mA | ||
Current consumption (24 V DC) | 4 mA for each input point used | |||||
Each relay coil used is 11 mA |
|
|
|
|||
Digital input | ||||||
Number of input points | 8 | 16 | ||||
Type | The sinking / sourcing type (IEC type 1 sinking) | |||||
Rated voltage | It is 24V DC when the current is 4 mA, nominal value | |||||
Allowable continuous voltage | Max 30 V DC | |||||
Surge voltage | 35 V DC, lasting 0.5 s | |||||
Logic 1 signal (min) | 15 V DC | |||||
Logic 0 signal (min) | 5 V DC | |||||
Isolation (field side and logic side) | 500 V AC, lasting 1 min | |||||
Isolation group | 2 | |||||
Filter time | 0.2, 0.4, 0.8, 1.6, 3.2, 6.4 and 12.8 ms (optional, 4 form one group) | |||||
Number of inputs that connect at the same time | 8 |
|
||||
Cable length | 500 m (Shielded), 150 m (non shielded) | |||||
Digital output | ||||||
Number of output | 8 | 16 | ||||
Type | Relay, dry contact | Solid state-MOSFET | Relay, dry contact | Solid state-MOSFET | ||
Voltage range | 5 ~ 30 V DC or 5 ~ 250 V AC | 20.4 ~ 28.8 V DC | 5 ~ 30 V DC or 5 ~ 250 V AC | 20.4 ~ 28.8 V DC | ||
Logic 1 signal when the current is max. | – | Min. 20 V DC | – | Min. 20 V DC | ||
Logic 0 signal when the load is KG | – | Max. 0.1 V DC | – | Max. 0.1 V DC | ||
Rated current at each point (max) | 2:00 AM | 0.75 A | 2:00 AM | 0.75 A | ||
Lamp load | 30 W DC/200 W AC | 5 W | 30 W DC/200 W AC | 5 W | ||
Resistance of the contact in the ON state | New equipment is 0.2 Ω maximally | Max. 0.6 Ω | New equipment is 0.2 Ω maximally | Max. 0.6 Ω | ||
Leakage current at each point | – | Max. 10 μ A | – | Max. 10 μ A | ||
Surge current | It is 7A when the contact is closed | 8 A, max. lasting 100 ms | It is 7A when the contact is closed | 8 A, max. lasting 100 ms | ||
Overload protection | none | |||||
Isolation (field side and logic side) | 1500 V AC, lasting 1 min (coil and contact) none, (coil and logic side) | 500 V AC, lasting 1 min | 1500 V AC, lasting 1 min (coil and contact) none, (coil and logic side) | 500 V AC, lasting 1 min | ||
Isolation resistance | New equipment is 100 MΩ minimally | – | New equipment is 100 MΩ minimally | – | ||
Disconnect the insulation between the contacts | 750 V AC, lasting 1 min | – | 750 V AC, lasting 1 min | – | ||
Isolated group | 2 | 2 | 4 | 3 | ||
Each end of the current public | 8:00 AM | 3:00 AM | 8:00 AM | 6:00 AM | ||
Inductive voltage clamp | – | -48 V | – | -48 V | ||
Switching delay | Max.10 ms | From the disconnection to connection max.50 μs from the connection to disconnection is 200 μs max. | Max.10 ms. | From the disconnection to connection max. 50 μs from the connection to disconnection is 200 μs max. | ||
Mechanical life (no load) | 10,000,000 break/close cycles | – | 10,000,000 break/close cycles | – | ||
Contact life under the rated load | 100,000 break/close cycles | – | 100,000 break/close cycles | – | ||
Output state under the STOP mode | Last value or replicable value (The default value is 0) | |||||
Number of output that are connected at the same time | 8 | 16 | ||||
Cable length | Shielded: 500 m; non shielded: 300 m |
Weight | N/A |
---|---|
Dimensions | N/A |
INOSAKI Limited
RM B 5/F Gaylord Comm,
Bldg 114-118 Lockhart Rd.
Hong Kong
INOSAKI Sdn. Bhd.
2-1-9, Ground Floor, One Square, Tingkat Mahsuri 1,
11900 Bayan Lepas, Penan
INOSAKI Pte. Ltd.
101 Upper Cross Street,
No. 06-17, People’s Park Centre,
Singapore (058357)