$ 54.51
The signal board is mounted directly on the front of the CPU body; without occupying the cabinet space,its installation and disassembly are convenient and quick. For a small amount of I/O points extension and more demand for communication ports, the signal board with new design can provide more economical and flexible solutions.
Model | 1 SB CM01 |
Order No | 6ES7 288-5CM01-0AA0 |
Standard | |
Dimension W x H x D (mm) | 35 x 52.2 x 16 |
Weight | 18.2 g |
Power consumption | 0.5 W |
Current consumption (5 V DC) | 50 Ma |
Current consumption (24 V DC) | Not applicable |
Transmitter and receiver (RS485) | |
common-mode voltage range ; | -7 V ~ +12 V, 1 s, 3 VRMS continuous |
Transmitter differential output voltage | min 2 V when RL = 100 Ω min 1.5 V when RL = 54 Ω |
Termination and bias | On TXD 4.7 KΩ for +5 V On RXD 4.7 KΩ for GND |
Receiver input impedance | Min 12 KΩ |
The receiver threshold / sensitivity | Minimum +/-0.2 V, the typical lag 60 mV |
Isolation The RS485 signal and the shell grounding RS485 signal and CPU logic common end |
None |
Length of cable, shielded cable | Isolation repeaters: 1000 m, baud rate up to 187.5 K No isolation repeaters: 50 m |
Transmitter and receiver (RS232) | |
Transmitter output voltage | Minimum +/-5V, when RL two 3 K |
Output voltage sent | MAX. +/-1 5 V DC |
Receiver input resistance | Min 3 KΩ |
Receiver threshold / sensitivity | Lower limit 0.8 V, top limit 2.4 V typical lag 0.5 V |
Receiver input voltage | Max +/- 30 V DC |
Isolation The RS232 signal and the shell grounding RS232 signal and CPU logic common end |
None |
Length of cable, shielded cable | Max. 10 m |
Weight | N/A |
---|---|
Dimensions | N/A |
INOSAKI Limited
RM B 5/F Gaylord Comm,
Bldg 114-118 Lockhart Rd.
Hong Kong
INOSAKI Sdn. Bhd.
2-1-9, Ground Floor, One Square, Tingkat Mahsuri 1,
11900 Bayan Lepas, Penan
INOSAKI Pte. Ltd.
101 Upper Cross Street,
No. 06-17, People’s Park Centre,
Singapore (058357)