SIMATIC S7-1500 – PM 1507 – Siemens Power Supply

$ 198.29 – $ 275.16

SKU: N/A

The design and functionality of the SIMATIC PM 1507 single-phase load power supply (PM = power module) with automatic range selection of the input voltage makes it an optimal match to the SIMATIC S7-1500 PLC. It supplies the S7-1500 system components such as CPU, system power supply (PS), I/O circuits of the input and output modules and, if necessary, the sensors and actuators with 24 V DC.

Siemens Power Supplies PM 1507 Product Specifications:

Article number 6EP1332-4BA00 6EP1333-4BA00
Product S7-1500 PM1507 S7-1500 PM1507
Power supply, type 24 V/3 A 24 V/8 A
Input
type of the power supply network 1-phase AC 1-phase AC
supply voltage at AC
● initial value Automatic range selection Automatic range selection
supply voltage
● 1 at AC rated value 120 V 120 V
● 2 at AC rated value 230 V 230 V
input voltage
● 1 at AC 85 … 132 V 85 … 132 V
● 2 at AC 170 … 264 V 170 … 264 V
design of input wide range input No No
overvoltage overload capability 2.3 × Vin rated, 1.3 ms 2.3 × Vin rated, 1.3 ms
operating condition of the mains buffering at Vin = 93/187 V at Vin = 93/187 V
buffering time for rated value of the output current in the event of power failure minimum 20 ms 20 ms
operating condition of the mains buffering at Vin = 93/187 V at Vin = 93/187 V
line frequency
● 1 rated value 50 Hz 50 Hz
● 2 rated value 60 Hz 60 Hz
line frequency 45 … 65 Hz 45 … 65 Hz
input current
● at rated input voltage 120 V 1.4 A 3.7 A
● at rated input voltage 230 V 0.8 A 1.7 A
current limitation of inrush current at 25 °C maximum 23 A 62 A
duration of inrush current limiting at 25 °C
● maximum 3 ms 3 ms
I2t value maximum 1.3 A²·s 12 A²·s
fuse protection type T 3,15 A/250 V (not accessible) T 6.3 A/250 V (not accessible)
● in the feeder Recommended miniature circuit breaker: 10 A characteristic B or 6 A characteristic C Recommended miniature circuit breaker: 16 A characteristic B or 10 A characteristic C
Output
voltage curve at output Controlled, isolated DC voltage Controlled, isolated DC voltage
output voltage at DC rated value 24 V 24 V
output voltage
● at output 1 at DC rated value 24 V 24 V
relative overall tolerance of the voltage 1 % 1 %
relative control precision of the output voltage
● on slow fluctuation of input voltage 0.1 % 0.1 %
● on slow fluctuation of ohm loading 0.1 % 0.1 %
residual ripple
● maximum 50 mV 50 mV
voltage peak
● maximum 150 mV 150 mV
product function output voltage adjustable No No
display version for normal operation LED green for 24 V OK; LED red for error; LED yellow for stand-by LED green for 24 V OK; LED red for error; LED yellow for stand-by
behavior of the output voltage when switching on No overshoot of Vout (soft start) No overshoot of Vout (soft start)
response delay maximum 1.5 s 1.5 s
voltage increase time of the output voltage
● typical 10 ms 10 ms
output current
● rated value 3 A 8 A
● rated range 0 … 3 A 0 … 8 A
supplied active power typical 72 W 192 W
short-term overload current
● on short-circuiting during the start-up typical 12 A 35 A
● at short-circuit during operation typical 12 A 35 A
duration of overloading capability for excess current
● on short-circuiting during the start-up 70 ms 70 ms
● at short-circuit during operation 70 ms 70 ms
product feature
● bridging of equipment Yes Yes
number of parallel-switched equipment resources for increasing the power 2 2
Efficiency
efficiency in percent 87 % 90 %
power loss [W]
● at rated output voltage for rated value of the output current typical 11 W 21 W
Closed-loop control
relative control precision of the output voltage with rapid fluctuation of the input voltage by +/- 15% typical 0.1 % 0.1 %
relative control precision of the output voltage load step of resistive load 50/100/50 % typical 1 % 2 %
relative control precision of the output voltage at load step of resistive load 10/90/10 % typical 3 % 3 %
setting time
● load step 10 to 90% typical 5 ms 5 ms
● load step 90 to 10% typical 5 ms 5 ms
● maximum 5 ms 5 ms
Protection and monitoring
design of the overvoltage protection Additional control loop, limitation (closed loop control) at < 28.8 V Additional control loop, limitation (closed loop control) at < 28.8 V
response value current limitation 3.15 … 3.6 A 8.4 … 9.6 A
response value current limitation typical 3.4 A 9 A
property of the output short-circuit proof Yes Yes
design of short-circuit protection Electronic shutdown, automatic restart Electronic shutdown, automatic restart
display version for overload and short circuit – –
Safety
galvanic isolation between input and output Yes Yes
galvanic isolation Safety extra-low output voltage Uout acc. to EN 60950-1 and EN 50178 and EN 61131-2 Safety extra-low output voltage Uout acc. to EN 60950-1 and EN 50178 and EN 61131-2
operating resource protection class Class I Class I
leakage current
● maximum 3.5 mA 3.5 mA
● typical 0.4 mA 1.3 mA
protection class IP IP20 IP20
Approvals
certificate of suitability
● CE marking Yes Yes
● UL approval Yes; cULus-Listed (UL 508, CSA C22.2 No. 142), File E143289 Yes; cULus-Listed (UL 508, CSA C22.2 No. 142), File E143289
● CSA approval Yes; cULus-Listed (UL 508, CSA C22.2 No. 142), File E143289 Yes; cULus-Listed (UL 508, CSA C22.2 No. 142), File E143289
● cCSAus, Class 1, Division 2 No No
● ATEX Yes; ATEX (EX) II 3G Ex nA nC IIC T4 Gc Yes; ATEX (EX) II 3G Ex nA nC IIC T3 Gc
certificate of suitability
● relating to ATEX IECEx Ex nA nC IIC T4 Gc; ATEX (EX) II 3G Ex nA nC IIC T4 Gc; cULus (ANSI/ISA 12.12.01, CSA C22.2 No.213) Class I, Div. 2, Group ABCD, T4, File E330455 IECEx Ex nA nC IIC T3 Gc; ATEX (EX) II 3G Ex nA nC IIC T3 Gc; cULus (ANSI/ISA 12.12.01, CSA C22.2 No.213) Class I, Div. 2, Group ABCD, T3, File E330455
● IECEx Yes; IECEx Ex nA nC IIC T4 Gc Yes; IECEx Ex nA nC IIC T3 Gc
● NEC Class 2 No No
● ULhazloc approval Yes Yes
● FM registration Yes; Class I, Div. 2, Group ABCD, T4 Yes; Class I, Div. 2, Group ABCD, T4
type of certification CB-certificate Yes Yes
certificate of suitability
● EAC approval Yes Yes
certificate of suitability shipbuilding approval Yes Yes
shipbuilding approval ABS, BV, DNV GL ABS, BV, DNV GL
Marine classification association
● American Bureau of Shipping Europe Ltd. (ABS) Yes Yes
● French marine classification society (BV) Yes Yes
● DNV GL Yes Yes
● Lloyds Register of Shipping (LRS) No No
● Nippon Kaiji Kyokai (NK) No No
EMC
standard
● for emitted interference EN 55022 Class B EN 55022 Class B
● for mains harmonics limitation EN 61000-3-2 EN 61000-3-2
● for interference immunity EN 61000-6-2 EN 61000-6-2
environmental conditions
ambient temperature
● during operation 0 … 60 °C; with natural convection 0 … 60 °C; with natural convection
● during transport -40 … +85 °C -40 … +85 °C
● during storage -40 … +85 °C -40 … +85 °C
environmental category according to IEC 60721 Climate class 3K3, 5 … 95% no condensation Climate class 3K3, 5 … 95% no condensation
Mechanics
type of electrical connection Screw-/spring clamp connection Screw-/spring clamp connection
● at input L, N, PE: 1 screw terminal each for 0.5 … 2.5 mm² L, N, PE: 1 screw terminal each for 0.5 … 2.5 mm²
● at output L+, M: 2 spring-loaded terminals each for 0.5 to 2.5 mm² L+, M: 2 spring-loaded terminals each for 0.5 to 2.5 mm²
product function
● removable terminal at input Yes Yes
● removable terminal at output Yes Yes
width of the enclosure 50 mm 75 mm
height of the enclosure 147 mm 147 mm
depth of the enclosure 129 mm 129 mm
required spacing
● top 40 mm 40 mm
● bottom 40 mm 40 mm
● left 0 mm 0 mm
● right 0 mm 0 mm
net weight 0.45 kg 0.74 kg
product feature of the enclosure housing can be lined up Yes Yes
fastening method Can be mounted onto S7-1500 rail Can be mounted onto S7-1500 rail
MTBF at 40 °C 1 611 993 h 1 362 918 h
other information Specifications at rated input voltage and ambient temperature +25 °C (unless otherwise specified) Specifications at rated input voltage and ambient temperature +25 °C (unless otherwise specified)
Weight N/A
Dimensions N/A

Related products