SIMATIC S7-1500 – CP 1542-5 Communications Processor – Siemens Communication Processor
$ 982.57
SKU: 6GK7542-5FX00-0XE0
The CP 1542-5 is the communications processor of the SIMATIC S7-1500 for the PROFIBUS bus system. It relieves the CPU from communications tasks.
Communications options of the S7-1500 using communication modules:
- As master for PROFIBUS DP according to IEC 61158/EN 50170 (max. 32 DP slaves)
- Communication with programming devices and HMI devices
The number of CPs that can be operated depends on the CPU type and on the communication services used.
Siemens HMI Basic Panel Product Specifications:
| Article number | 6GK7542-5FX00-0XE0 | |
| product type designation | CP 1542-5 | |
| transfer rate | ||
| transfer rate | ||
| ● at the 1st interface according to PROFIBUS | 9.6 kbit/s … 12 Mbit/s | |
| interfaces | ||
| number of interfaces according to Industrial Ethernet | 0 | |
| number of electrical connections | ||
| ● at the 1st interface according to PROFIBUS | 1 | |
| type of electrical connection | ||
| ● at the 1st interface according to PROFIBUS | 9-pin Sub-D socket (RS485) | |
| supply voltage, current consumption, power loss | ||
| type of voltage of the supply voltage | DC | |
| supply voltage 1 from backplane bus | 15 V | |
| relative symmetrical tolerance at DC | ||
| ● at 15 V | 3 % | |
| consumed current | ||
| ● from backplane bus at DC at 15 V typical | 0.1 A | |
| power loss [W] | 1.5 W | |
| ambient conditions | ||
| ambient temperature | ||
| ● for vertical installation during operation | 0 … 40 °C | |
| ● for horizontally arranged busbars during operation | 0 … 60 °C | |
| ● during storage | -40 … +70 °C | |
| ● during transport | -40 … +70 °C | |
| relative humidity | ||
| ● at 25 °C without condensation during operation maximum | 95 % | |
| protection class IP | IP20 | |
| design, dimensions and weights | ||
| module format | Compact module S7-1500 single width | |
| width | 35 mm | |
| height | 142 mm | |
| depth | 129 mm | |
| net weight | 0.27 kg | |
| fastening method | ||
| ● S7-1500 rail mounting | Yes | |
| product features, product functions, product components general | ||
| number of units | ||
| ● per CPU maximum | 8 | |
| ● note | depending on CPU type | |
| performance data PROFIBUS DP | ||
| service as DP master | ||
| ● DPV1 | Yes | |
| number of DP slaves | ||
| ● on DP master operable | 32 | |
| data volume | ||
| ● of the address range of the inputs as DP master total | 2 048 byte | |
| ● of the address range of the outputs as DP master total | 2 048 byte | |
| ● of the address range of the inputs per DP slave | 244 byte | |
| ● of the address range of the outputs per DP slave | 244 byte | |
| service as DP slave | ||
| ● DPV0 | Yes | |
| ● DPV1 | Yes | |
| data volume | ||
| ● of the address range of the inputs as DP slave total | 240 byte | |
| ● of the address range of the outputs as DP slave total | 240 byte | |
| performance data S7 communication | ||
| number of possible connections for S7 communication | ||
| ● maximum | 16; depending on the system upper limit | |
| performance data multi-protocol mode | ||
| number of active connections with multi-protocol mode | 16 | |
| performance data telecontrol | ||
| protocol is supported | ||
| ● TCP/IP | No | |
| product functions management, configuration, engineering | ||
| configuration software | ||
| ● required | STEP 7 Professional V12 SP1 (TIA Portal) or higher | |
| identification & maintenance function | ||
| ● I&M0 – device-specific information | Yes | |
| ● I&M1 – higher level designation/location designation | Yes | |
| product functions diagnostics | ||
| product function web-based diagnostics | Yes; via S7-1500 CPU | |
| product functions time | ||
| product function pass on time synchronization | Yes | |
| standards, specifications, approvals hazardous environments | ||
| certificate of suitability CCC for hazardous zone according to GB standard | Yes | |
| Weight | 0.339 kg |
|---|---|
| Dimensions | 0.1 × 0.1 × 0.1 cm |
