$ 484.50
The CM 1242-5 is designed for use in factory automation.
With the CM 1242-5, low-cost, distributed automation solutions can be implemented on the basis of the SIMATIC S7-1200, or in simple cases even complete plant automation systems. It can be used in all sectors of discrete automation. These include, for example:
Article number | 6GK7242-5DX30-0XE0 | |
product type designation | CM 1242-5 | |
transfer rate | ||
transfer rate | ||
● at the 1st interface according to PROFIBUS | 9.6 kbit/s … 12 Mbit/s | |
interfaces | ||
number of interfaces according to Industrial Ethernet | 0 | |
number of electrical connections | ||
● at the 1st interface according to PROFIBUS | 1 | |
● for power supply | 0 | |
type of electrical connection | ||
● at the 1st interface according to PROFIBUS | 9-pin Sub-D socket (RS485) | |
supply voltage, current consumption, power loss | ||
type of voltage of the supply voltage | DC | |
supply voltage 1 from backplane bus | 5 V | |
consumed current | ||
● from backplane bus at DC at 5 V typical | 0.15 A | |
power loss [W] | 0.75 W | |
ambient conditions | ||
ambient temperature | ||
● for vertical installation during operation | 0 … 45 °C | |
● for horizontally arranged busbars during operation | 0 … 55 °C | |
● during storage | -40 … +70 °C | |
● during transport | -40 … +70 °C | |
relative humidity | ||
● at 25 °C without condensation during operation maximum | 95 % | |
protection class IP | IP20 | |
design, dimensions and weights | ||
module format | Compact module S7-1200 single width | |
width | 30 mm | |
height | 100 mm | |
depth | 75 mm | |
net weight | 0.115 kg | |
fastening method | ||
● 35 mm top hat DIN rail mounting | Yes | |
● S7-300 rail mounting | No | |
● wall mounting | Yes | |
product features, product functions, product components general | ||
number of units | ||
● per CPU maximum | 3 | |
performance data PROFIBUS DP | ||
service as DP slave | ||
● DPV0 | Yes | |
● DPV1 | Yes | |
data volume | ||
● of the address range of the inputs as DP slave total | 240 byte | |
● of the address range of the outputs as DP slave total | 240 byte | |
performance data telecontrol | ||
protocol is supported | ||
● TCP/IP | No | |
product functions management, configuration, engineering | ||
configuration software | ||
● required | STEP 7 Basic/Professional | |
standards, specifications, approvals hazardous environments | ||
certificate of suitability CCC for hazardous zone according to GB standard | Yes |
Weight | 0.172 kg |
---|---|
Dimensions | 0.1 × 0.1 × 0.1 cm |
INOSAKI Limited
RM B 5/F Gaylord Comm,
Bldg 114-118 Lockhart Rd.
Hong Kong
INOSAKI Sdn. Bhd.
2-1-9, Ground Floor, One Square, Tingkat Mahsuri 1,
11900 Bayan Lepas, Penan
INOSAKI Pte. Ltd.
101 Upper Cross Street,
No. 06-17, People’s Park Centre,
Singapore (058357)