Contact Us:
sales@inosaki.com

SIMATIC ET 200SP – BA-SEND BA1XFC – Siemens BusAdapter

$ 143.83

SKU 6ES7193-6AS00-0AA0 Category

ET 200SP BusAdapter “BA-Send”

BA-Send BusAdapters are used whenever an existing ET 200SP station is to be expanded with IP67 modules of the SIMATIC ET 200AL.

The SIMATIC ET 200AL is a distributed I/O device with degree of protection IP65/67 that is easy to operate and install. Due to its high degree of protection and ruggedness as well as its small dimensions and low weight, the ET 200AL is especially suitable for use at the machine and on moving plant sections. SIMATIC ET 200AL enables the user to access digital and analog signals and IO-Link data at low cost.

Siemens BusAdapter ET 200SP Product Specifications:

Article number 6ES7193-6AS00-0AA0
ET 200SP, Busadapter BA-Send BA1XFC
General information
Product type designation BA-Send 1xFC
HW functional status From FS05
Interfaces
Supports protocol for PROFINET IO
Cable length
— Cu conductors 15 m; from IM firmware V3.3: between BA-send and the first ET-CONNECTION bus node and between all other bus nodes
ET-Connection
● Number of interfaces ET connection 1
● FC (FastConnect) Yes
Ambient conditions
Ambient temperature during operation
● horizontal installation, min. -30 °C
● horizontal installation, max. 60 °C
● vertical installation, min. -30 °C
● vertical installation, max. 50 °C
Altitude during operation relating to sea level
● Installation altitude above sea level, max. 5 000 m; restrictions for installation altitudes > 2 000 m, see ET 200SP system manual
Dimensions
Width 20 mm
Weights
Weight, approx. 44 g

Additional information

Weight 0.052 kg
Dimensions 6.5 × 7.6 × 3.2 cm

Related Products

Banner_S18RW3R
SIEMENS_SIMATIC S7-400-Communications Processor CP 443-1
PM-K44
MPHC-03M-150(F)
Festo_Piston rod cylinders_DPDM-16-20-PA_4833188_1
Select your currency