The IM 155-5 PN interface module enables the connection of ET 200MP to PROFINET and handles the communication between the modules and the higher-level I/O controller autonomously.

Siemens Interface Modules ET 200MP Product Specifications:

Article number	6ES7155-5AA00-0AA0	6ES7155-5AA00-0AC0	6ES7155-5AA01-0AB0
	ET 200MP, IM 155-5 PN BA	ET 200MP, IM 155-5 PN HF	ET 200MP, IM 155-5 PN ST
General information
Product type designation	IM 155-5 PN BA	IM 155-5 PN HF	IM 155-5 PN ST
HW functional status	From FS02	From FS03	From FS01
Firmware version	V4.3.0	V4.4	V4.1.0
● FW update possible		Yes
Vendor identification (VendorID)	0x002A	002AH	0x002A
Device identifier (DeviceID)	0X0312	0X0312	0X0312
Product function
● I&M data	Yes; I&M0 to I&M3	Yes; I&M0 to I&M3	Yes; I&M0 to I&M3
● Module swapping during operation (hot swapping)	No	Yes; In combination with active backplane bus	No
● Isochronous mode	No	Yes	Yes
Engineering with
● STEP 7 TIA Portal configurable/integrated from version	V15.1 with HSP 187	V16 with HSP 308	V14 or higher with HSP 0223 / integrated with V15 or higher
● STEP 7 configurable/integrated from version	V5.5 SP3 / –	V5.5 SP3 / –	GSDML V2.32
● PROFINET from GSD version/GSD revision	V2.3 / –	V2.3 / –	V2.3 / –
Configuration control
via user data	No	No	No
via dataset	No	Yes	Yes
Supply voltage
Rated value (DC)	24 V	24 V	24 V
permissible range, lower limit (DC)	19.2 V	19.2 V	19.2 V
permissible range, upper limit (DC)	28.8 V	28.8 V	28.8 V
Reverse polarity protection	Yes	Yes	Yes
Short-circuit protection	Yes	Yes	Yes
Mains buffering
● Mains/voltage failure stored energy time	5 ms	5 ms	10 ms
Input current
Current consumption (rated value)	1 A	0.2 A	0.2 A
Current consumption, max.	1.7 A	1.2 A	1.2 A
Inrush current, max.	2.8 A	9 A	9 A
I²t	0.04 A²·s	0.09 A²·s	0.09 A²·s
Power
Infeed power to the backplane bus	14 W	14 W	14 W
Power available from the backplane bus		2.3 W	2.3 W
Power loss
Power loss, typ.	3 W	4.5 W	4.5 W
Address area
Address space per module
● Address space per module, max.	64 byte; per input / output	256 byte; per input / output	256 byte; per input / output
Address space per station
● Address space per station, max.	64 byte; per input / output	512 byte; per input / output	512 byte; per input / output
Hardware configuration
Integrated power supply	Yes	Yes	Yes
System power supply can be plugged in to left of IM	No	Yes; only with design with U-connectors	Yes
Number of permissible power segments	1	3	3
Rack
● Modules per rack, max.	12; I/O modules	30; I/O modules	30; I/O modules
Submodules
● Number of submodules per station, max.	108; 9 submodules / I/O modules	256
Interfaces
Number of PROFINET interfaces	1; 2 ports (switch) RJ45	1	1
1. Interface
Interface types
● RJ 45 (Ethernet)	Yes	Yes	Yes
● Number of ports	2	2	2
● integrated switch	Yes	Yes	Yes
● BusAdapter (PROFINET)	No
Protocols
● PROFINET IO Device	Yes	Yes	Yes
● Open IE communication	Yes	Yes	Yes
● Media redundancy	Yes	Yes	Yes; PROFINET MRP
Interface types
RJ 45 (Ethernet)
● Transmission procedure	PROFINET with 100 Mbit/s full duplex (100BASE-TX)	PROFINET with 100 Mbit/s full duplex (100BASE-TX)	PROFINET with 100 Mbit/s full duplex (100BASE-TX)
● 100 Mbps	Yes	Yes	Yes
● Autonegotiation	Yes	Yes	Yes
● Autocrossing	Yes	Yes	Yes
Protocols
PROFINET IO Device
Services
— IRT	No	Yes	Yes
— PROFIenergy	No	No	No
— Prioritized startup	No	Yes	Yes
— Shared device	Yes	Yes	Yes
— Number of IO Controllers with shared device, max.	2	4	2
Redundancy mode
● PROFINET system redundancy (S2)	No	Yes	No
— on S7-1500R/H		Yes
— on S7-400H		Yes; With GSDML file as of STEP 7 V5.5 SP3
● PROFINET system redundancy (R1)		No	No
● H-Sync forwarding		Yes
Media redundancy
— MRP	Yes	Yes	Yes
— MRPD	No	Yes	No
Open IE communication
● TCP/IP	Yes	Yes	Yes
● SNMP	Yes	Yes	Yes
● LLDP	Yes	Yes	Yes
Isochronous mode
Equidistance	No	Yes	Yes
shortest clock pulse		250 µs	250 µs
max. cycle		4 ms	4 ms
Interrupts/diagnostics/status information
Status indicator	Yes	Yes	Yes
Alarms	Yes	Yes	Yes
Diagnostics function	Yes	Yes	Yes
Diagnostics indication LED
● RUN LED	Yes; green LED	Yes; green LED	Yes; green LED
● ERROR LED	Yes; red LED	Yes; red LED	Yes; red LED
● MAINT LED	Yes; Yellow LED	Yes; Yellow LED	Yes; Yellow LED
● Connection display LINK TX/RX	Yes; 2x green-yellow LEDs	Yes; 2x green-yellow LEDs	Yes; 2x green-yellow LEDs
Potential separation
between backplane bus and electronics	No	No	No
between PROFINET and all other circuits	Yes; 1 500 V AC	Yes; 1 500 V AC	Yes
between supply and all other circuits	No	No	No
Permissible potential difference
between different circuits	Safety extra low voltage SELV
Isolation
Isolation tested with	707 V DC (type test)	707 V DC (type test)	707 V DC (type test)
Standards, approvals, certificates
Network loading class	2
Ambient conditions
Ambient temperature during operation
● horizontal installation, min.	-30 °C; From FS03	-25 °C; from FS04	-25 °C; From FS03
● horizontal installation, max.	60 °C	60 °C	60 °C
● vertical installation, min.	-30 °C; From FS03	-25 °C; from FS04	-25 °C; From FS03
● vertical installation, max.	40 °C	40 °C	40 °C
Altitude during operation relating to sea level
● Installation altitude above sea level, max.	5 000 m; Restrictions for installation altitudes > 2 000 m, see manual	5 000 m; Restrictions for installation altitudes > 2 000 m, see manual	5 000 m; Restrictions for installation altitudes > 2 000 m, see manual
connection method / header
ET-Connection
● via BU/BA Send		No	No
Dimensions
Width	35 mm	35 mm	35 mm
Height	147 mm	147 mm	147 mm
Depth	129 mm	129 mm	129 mm
Weights
Weight, approx.	236 g	350 g