Menu
Menu
$ 92.02
The active RS 485 terminating resistor is used to terminate bus segments. The resistor is supplied with power independently of the bus nodes. The terminating resistor is hereby supplied separately from the other I/O components with a permanent voltage or with a voltage switched upstream of the I/O. By terminating the bus system, the nodes (e.g. ET 200SP) can be freely connected and disconnected without malfunctions.
| Article number | 6ES7972-0DA00-0AA0 |
| RS485 Termin. resistor f. PROFIBUS/MPI, | |
| Supply voltage | |
| Rated value (DC) | 24 V |
| permissible range, lower limit (DC) | 20.4 V |
| permissible range, upper limit (DC) | 28.8 V |
| Input current | |
| Current consumption, typ. | 30 mA |
| Power loss | |
| Power loss, max. | 0.72 W |
| Interfaces | |
| PROFIBUS DP | |
| ● Transmission rate, max. | 12 Mbit/s; 9.6 kbit/s to 12 Mbit/s |
| Degree and class of protection | |
| IP degree of protection | IP20 |
| Ambient conditions | |
| Ambient temperature during operation | |
| ● min. | 0 °C |
| ● max. | 60 °C |
| Ambient temperature during storage/transportation | |
| ● min. | -40 °C |
| ● max. | 70 °C |
| Relative humidity | |
| ● Operation, max. | 95 %; at +25 °C |
| connection method / header | |
| Design of electrical connection for supply voltage | Screw terminal block |
| Design of electrical connection for PROFIBUS cables | Screw terminal block |
| Dimensions | |
| Width | 60 mm |
| Height | 70 mm |
| Depth | 43 mm |
| Weights | |
| Weight, approx. | 95 g |
| Weight | 0.106 kg |
|---|---|
| Dimensions | 7.3 × 8.7 × 6 cm |
INOSAKI Limited
RM B 5/F Gaylord Comm,
Bldg 114-118 Lockhart Rd.
Hong Kong
INOSAKI Sdn. Bhd.
2-1-9, Ground Floor, One Square, Tingkat Mahsuri 1,
11900 Bayan Lepas, Penan
INOSAKI Pte. Ltd.
101 Upper Cross Street,
No. 06-17, People’s Park Centre,
Singapore (058357)
