USD 105.72
Magnetic T-slot cylinder sensor featuring 0-50mm detection, dual PNP NO outputs, IP67 rating, and 0.3m PUR cable with M8 4-pin plug for precise positioning.
Magnetic T-slot cylinder sensor featuring 0-50mm detection, dual PNP NO outputs, IP67 rating, and 0.3m PUR cable with M8 4-pin plug for precise positioning.
| Parameter | Value |
|---|---|
| Supply Voltage | 12 V DC ... 30 V DC |
| Voltage Drop | <= 2.2 V |
| Continuous Current (Ia) | <= 100 mA |
| Detection Zone | 0 mm ... 50 mm |
| Output Type | 2 x PNP |
| Output Function | 2 x NO (Normally Open) |
| Switching Frequency | 1,000 Hz |
| Connection Type | Cable with M8 male connector, 4-pin, 0.3 m |
| Cable Diameter | 2.6 mm |
| Housing Material | Plastic |
| Cable Material | PUR |
| Enclosure Rating | IP67 |
| Ambient Operating Temperature | -20 °C to +75 °C |
| Shock and Vibration Resistance | 30 g, 11 ms / 10 ... 55 Hz, 1 mm |
| Hysteresis | 1 mT typ. |
| Reproducibility | <= 0.1 mT |
| Housing Length | 40 mm |
| Physical Weight (kg) | 0.02 |
| Dimensions L x W x H (cm) | 4 x 0 x 0 |
The dual PNP NO outputs can map to both the 'fully open' and 'fully closed' positions of a pneumatic gripper utilizing a single device.
Eliminates the spatial constraints and wiring complexity of using two separate sensors on a compact pneumatic gripper.
Detects the exact limit positions of a piston within a tie-rod cylinder using the extensive 50mm detection range.
Prevents mechanical over-travel and collision by reliably signaling the PLC when the pneumatic actuator reaches its stroke limits.
The 0-50mm sensing range allows for teaching an intermediate slowdown point and a final stop point on linear automation slides.
Provides precise, non-contact intermediate position feedback without needing continuous analog outputs or multiple discrete sensors.
