SICK 1029853 HLG2-050F811 Switching Automation Light Grid

USD 822.64

HLG2-050F811 uses 26 beams at 2 mm spacing across a 50 mm detection height, with 1.5 m operating range, complementary PNP outputs and cable synchronization.

SKU SICK-1029853 Category
SICK Automation Light Grids

SICK HLG2-050F811 Switching Automation Light Grid

BrandSICK
Model IdentifierHLG2-050F811
Official Part Number1029853

Technical Overview

The SICK HLG2-050F811 is a sender/receiver automation light grid with 26 parallel beams at 2 mm spacing across a 50 mm detection height. Operating range is 1.5 m, while maximum range is 2 m and minimum detectable object size varies with separation. The receiver provides complementary PNP signals: Q is active when at least one beam is interrupted, and Q̅ is active when all beams are clear. Parallel-beam response is 3 ms with resistive load. A PNP teach input, cable synchronization and receiver LEDs support setup and diagnostics. The 950 nm infrared system uses M12 eight-pin connections, aluminum housings and PMMA screens, with IP54 protection and operation from −25 to +55 °C.

26-beam automation light grid with 2 mm spacing, 50 mm detection height, 1.5 m operating range, complementary PNP outputs and cable synchronization.

Key Features

  • Sender/receiver automation light grid; 950 nm infrared
  • 26 parallel beams; 2 mm beam spacing; 50 mm detection height
  • 2 mm nominal parallel-beam minimum detectable object; separation-dependent MDO curve
  • 1.5 m operating range; 2 m maximum range
  • Complementary PNP outputs; Q active on any interrupted beam, Q̅ active when all beams are clear
  • 3 ms parallel-beam response with resistive load; output current ≤100 mA
  • PNP teach input; cable synchronization; 0.8 s initialization
  • M12 eight-pin male connections; receiver LEDs for optical and diagnostic conditions
  • 15–30 V DC; aluminum housing and PMMA front screen; IP54
  • Operation −25 to +55 °C; indirect-sunlight immunity ≤50,000 lx

Detect an interruption anywhere across a 50 mm beam array and provide complementary PNP results for external counting or material-flow logic.

Technical Specification Matrix

ParameterValue
Sensor principleSender/receiver switching automation light grid
Number of beams26
Beam separation2 mm
Detection height50 mm
Minimum detectable object2 mm parallel-beam nominal value; size measured parallel to the HLG; source MDO curve worsens at very short separation and beyond the nominal operating range
Operating range1.5 m
Maximum range2 m
Minimum range≥0 mm; actual detectable-object size depends on separation
Wavelength950 nm
Switching outputTwo complementary PNP signals, Q and Q̅
Output behaviorQ dark switching: active if at least one beam is interrupted; Q̅ active if all beams are free
Output current≤100 mA
Response timeParallel beam: 3 ms with resistive load
Capacitive output load100 nF
Inductive output load1 H
Initialization time0.8 s
Teach inputPNP
SynchronizationCable
Power supply15–30 V DC, as listed by manufacturer
Sender current consumptionTypical 56.3 mA
Receiver current consumptionTypical 125.2 mA
Ripple<5 Vpp
Circuit protectionSupply reverse-polarity protection; output Q short-circuit protection; interference-pulse suppression
Protection classIII
ConnectionM12 eight-pin male connections
Common pin functions1 WH=Sync B; 2 BN=L+; 3 GN=Sync A; 7 BU=M
Sender pin functions4 YE=not assigned; 5 GY=TEST; 6 PK=not assigned; 8 RD=not assigned
Receiver pin functions4 YE=teach-in; 5 GY=Q; 6 PK=Q̅; 8 RD=not assigned
IndicationLEDs; power, clear/blocked light path, synchronization error, weak received signal during teaching, device error and teach process
Housing materialAluminum
Front screenPMMA
IP ratingIP54
Shock resistance10 g, 16 ms; DIN EN 60068-2-29
Vibration resistance5 g, 10–55 Hz; IEC 68-2-6
EMCEN 60947-5-2
Ambient light immunityIndirect sunlight ≤50,000 lx
Operating temperature−25 to +55 °C
Storage temperature−40 to +70 °C

Industrial Applications

1. Counting small parts crossing a discharge path

A discharge guide can pass separated opaque parts through the 50 mm detection height and feed the Q signal to external counting logic. The 26-beam array accommodates variation in crossing position within that height. Commissioning checks actual part coverage and separation against the distance-dependent minimum-object curve and the 3 ms resistive-load response before establishing the usable passage rate.

Problem Solved

An interruption across the beam array gives external counting logic a passage event, helping register small parts whose trajectories vary within the installed detection height.

Small-part counting Beam array External counter

2. Monitoring loss of opaque material in a feed path

A feeder can arrange the grid across a guided opaque web or strip so normal material interrupts one or more beams. A complete break or run-out that clears the monitored path changes Q and Q̅, which external feed logic evaluates for its process response. Setup verifies material coverage, guide movement, optical alignment and the installed sender/receiver separation.

Problem Solved

A clear-path transition gives external feed control a material-loss reference, helping distinguish normal beam interruption from a break or run-out that leaves the monitored path open.

Material continuity Feed monitoring Clear-path transition

3. Diagnosing optical setup during commissioning

Commissioning staff can teach the installed optical arrangement and use the receiver LEDs to distinguish a blocked path from synchronization, weak-signal or device-error conditions. The cable-synchronized sender and receiver are aligned within the intended operating separation. External machine motion remains controlled by the commissioning procedure while the engineer checks teach completion and the complementary output states.

Problem Solved

Separate optical and diagnostic indications help commissioning identify why an expected switching state is missing, supporting targeted alignment, synchronization or wiring checks before normal process operation.

Commissioning diagnostics Receiver LEDs Cable synchronization
Select your currency