Menu
Menu
$ 170.06
The emitter and receiver are aligned in a housing such that the retroreflective sensors are easy to install. Simply position a reflector on the opposite side and align the sensor with it. The standard version featuring a polarization filter combines the installation benefits offered by the retroreflective system with the reliable detection, even of reflective objects, at long detection ranges. The retroreflective sensors for clear object detection are ideal for reliably detecting transparent objects.
| General specifications | |
|---|---|
| Effective detection range | 0 … 17 m |
| Reflector distance | 0.05 … 17 m |
| Threshold detection range | 21 m |
| Reference target | H85-2 reflector |
| Light source | LED |
| Light type | modulated visible red light , 660 nm |
| Polarization filter | yes |
| Diameter of the light spot | approx. 290 mm at a distance of 17 m |
| Opening angle | emitter 1.2° receiver 2° |
| Ambient light limit | 80000 Lux |
| Functional safety related parameters | |
| MTTFd | 600 a |
| Mission Time (TM) | 20 a |
| Diagnostic Coverage (DC) | 0 % |
| Indicators/operating means | |
| Operation indicator | LED green |
| Function indicator | 2 LEDs yellow, light up when light beam is free, flash when falling short of the stability control, off when light beam is interrupted |
| Control elements | sensitivity adjustment (Adjustment to < 25% of the effective operating range) , Light-on/dark-on changeover switch |
| Electrical specifications | |
| Operating voltage | 12 … 240 V AC/DC |
| Power consumption | ≤ 3.5 VA |
| Output | |
| Switching type | light/dark on, switchable (selectable, light/dark switching is only activated if the receiver has ‘dark on’ selected.) |
| Signal output | Relay, 1 alternator |
| Switching voltage | max. 250 V AC/DC |
| Switching current | max. 2 A |
| Switching power | DC: max. 50 W AC: max. 500 VA |
| Switching frequency | 25 Hz |
| Response time | 20 ms |
| Timer function | ON delay (GAN), OFF delay (GAB), one shot (IAB), ON delay-one shot (GAN-IAB), ON delay-OFF delay (GAN-GAB), programmable adjustment interval 0.1 … 10 s |
| Conformity | |
| Product standard | EN 60947-5-2 |
| Approvals and certificates | |
| Protection class | II, rated insulation voltage ≤ 250 V AC with pollution degree 1-2 according to IEC 60664-1 Output circuit insulated from control circuit in accordance with IEC 61140. Caution! The protection class 2 is only valid when the terminal compartment is closed. |
| Ambient conditions | |
| Ambient temperature | -40 … 60 °C (-40 … 140 °F) |
| Storage temperature | -40 … 60 °C (-40 … 140 °F) |
| Mechanical specifications | |
| Housing width | 25.8 mm |
| Housing height | 88 mm |
| Housing depth | 65.5 mm |
| Degree of protection | IP65 |
| Connection | 7-pin surface-mounted connector, up to 250 VAC (without cable socket) |
| Material | |
| Housing | Plastic ABS |
| Optical face | Plastic pane |
| Mass | 180 g |
| Accessories | |||||||
|---|---|---|---|---|---|---|---|
|
|||||||
|
|||||||
|
|||||||
|
|||||||
|
|||||||
| Weight | 0.18 kg |
|---|---|
| Dimensions | 6.55 × 2.58 × 8.8 cm |
INOSAKI Limited
RM B 5/F Gaylord Comm,
Bldg 114-118 Lockhart Rd.
Hong Kong
INOSAKI Sdn. Bhd.
2-1-9, Ground Floor, One Square, Tingkat Mahsuri 1,
11900 Bayan Lepas, Penan
INOSAKI Pte. Ltd.
101 Upper Cross Street,
No. 06-17, People’s Park Centre,
Singapore (058357)
