Inosaki is one of the largest Phoenix Contact Distributors to provide terminal block, interface module, power supply and relay. And our best offer for terminal block types are Feed-through, Fuse Modular, Spring Cage, Double Level, and Multi-level, hence the series model references to PT Series, ST Series, TB Series, UT Series, UK Series. In additional for power supply are QUINT Power, STEP Power, Trio Power, and UNO Power. Please email us for catalog: sales@inosaki.my
Product Description
QUINT POWER power supplies with maximum functionality
QUINT POWER circuit breakers magnetically and therefore quickly trip at six times the nominal current, for selective and therefore cost-effective system protection. The high level of system availability is additionally ensured, thanks to preventive function monitoring, as it reports critical operating states before errors occur.
Reliable starting of heavy loads takes place via the static power reserve POWER BOOST. Thanks to the adjustable voltage, all ranges between 5 V DC … 56 V DC are covered.
Dimensions
| Width |
90 mm |
| Height |
130 mm |
| Depth |
125 mm |
| Installation dimensions |
| Installation distance right/left |
5 mm / 5 mm |
| Installation distance top/bottom |
50 mm / 50 mm |
| Alternative assembly |
| Width |
122 mm |
| Height |
130 mm |
| Depth |
93 mm |
Ambient Conditions
| Degree of protection |
IP20 |
| Ambient temperature (operation) |
-25 °C … 70 °C (> 60 °C Derating: 2,5 %/K) |
| Ambient temperature (storage/transport) |
-40 °C … 85 °C |
| Ambient temperature (start-up type tested) |
-40 °C |
| Maximum altitude |
6000 m |
| Climatic class |
3K3 (in acc. with EN 60721) |
| Max. permissible relative humidity (operation) |
≤ 95 % (at 25 °C, non-condensing) |
| Shock |
18 ms, 30g, in each space direction (according to IEC 60068-2-27) |
| Vibration (operation) |
< 15 Hz, amplitude ±2.5 mm (according to IEC 60068-2-6) |
| 15 Hz … 150 Hz, 2.3g, 90 min. |
Input Data
| Nominal input voltage range |
100 V AC … 240 V AC |
| Input voltage range |
85 V AC … 264 V AC |
| 90 V DC … 350 V DC (UL 508: ≤ 250 V DC) |
| Input voltage range AC |
85 V AC … 264 V AC |
| Input voltage range DC |
90 V DC … 350 V DC (UL 508: ≤ 250 V DC) |
| Electric strength, max. |
300 V AC |
| Voltage type of supply voltage |
AC/DC |
| Inrush current |
< 20 A (typical) |
| Inrush current integral (I2t) |
< 3.2 A2s |
| AC frequency range |
45 Hz … 65 Hz |
| Frequency range DC |
0 Hz |
| Mains buffering time |
> 20 ms (120 V AC) |
| > 20 ms (230 V AC) |
| Current consumption |
5.1 A (120 V AC) |
| 2.3 A (230 V AC) |
| 4.8 A (110 V DC) |
| 2.4 A (220 V DC) |
| Nominal power consumption |
572 VA |
| Protective circuit |
Transient surge protection; Varistor |
| Typical response time |
< 1 s |
| Input fuse |
12 A (slow-blow, internal) |
| Permissible backup fuse |
B10 B16 AC: |
| Permissible DC backup fuse |
DC: Connect a suitable fuse upstream |
| Recommended breaker for input protection |
10 A … 16 A (AC: Characteristics B, C, D, K) |
| Discharge current to PE |
< 3.5 mA |
Output Data
| Efficiency |
> 93 % (for 230 V AC and nominal values) |
| Output characteristic |
U/I |
| Nominal output voltage |
48 V DC ±1 % |
| Setting range of the output voltage (USet) |
30 V DC … 56 V DC (> 48 V DC, constant capacity restricted) |
| Nominal output current (IN) |
10 A (-25 °C … 60 °C, UOUT = 48 V DC) |
| POWER BOOST (IBoost) |
13 A (-25 °C … 40 °C permanent, UOUT = 48 V DC ) |
| Selective Fuse Breaking (ISFB) |
60 A (12 ms) |
| Magnetic circuit breaker tripping |
B2 / B4 / B6 / C2 / C4 |
| Derating |
60 °C … 70 °C (2.5%/K) |
| Feedback voltage resistance |
max. 60 V DC |
| Protection against overvoltage at the output (OVP) |
< 60 V DC |
| Active current limitation |
IBOOST = 13 A (for short-circuit), approximately |
| Control deviation |
< 1 % (change in load, static 10 % … 90 %) |
| < 2 % (change in load, dynamic 10 % … 90 %) |
| < 0.1 % (change in input voltage ±10 %) |
| Residual ripple |
< 80 mVPP (with nominal values) |
| Output power |
480 W |
| Maximum no-load power dissipation |
16 W |
| Power loss nominal load max. |
41 W |
| Rise time |
< 0.5 ms (UOUT (10 % … 90 %)) |
| Connection in parallel |
yes, for redundancy and increased capacity |
| Connection in series |
yes |
Commercial Data
| Item number |
2866682 |
| Packing unit |
1 pc |
| Minimum order quantity |
1 pc |
| Note |
Made to Order (non-returnable) |
| Sales Key |
C14 |
| Product Key |
CMPQ14 |
| Catalog Page |
Page 213 (C-4-2017) |
| GTIN |
4046356307680 |
| Weight per Piece (including packing) |
2,247.2 g |
| Weight per Piece (excluding packing) |
1,600 g |
| Customs tariff number |
85044030 |
| Country of origin |
TH |
Connection Data, Input
| Connection method |
Screw connection |
| Conductor cross section solid min. |
0.2 mm² |
| Conductor cross section solid max. |
6 mm² |
| Conductor cross section flexible min. |
0.2 mm² |
| Conductor cross section flexible max. |
4 mm² |
| Conductor cross section AWG min. |
18 |
| Conductor cross section AWG max. |
10 |
| Stripping length |
7 mm |
| Screw thread |
M3 |
| Tightening torque, min |
0.5 Nm |
| Tightening torque max |
0.6 Nm |
Connection Data, Output
| Connection method |
Screw connection |
| Conductor cross section solid min. |
0.2 mm² |
| Conductor cross section solid max. |
6 mm² |
| Conductor cross section flexible min. |
0.2 mm² |
| Conductor cross section flexible max. |
4 mm² |
| Conductor cross section AWG min. |
12 |
| Conductor cross section AWG max. |
10 |
| Stripping length |
7 mm |
| Screw thread |
M3 |
| Tightening torque, min |
0.5 Nm |
| Tightening torque max |
0.6 Nm |
Connection Data, Signal
| Connection method |
Screw connection |
| Conductor cross section solid min. |
0.2 mm² |
| Conductor cross section solid max. |
6 mm² |
| Conductor cross section flexible min. |
0.2 mm² |
| Conductor cross section flexible max. |
4 mm² |
| Conductor cross section AWG min. |
18 |
| Conductor cross section AWG max. |
10 |
| Screw thread |
M3 |
| Tightening torque, min |
0.5 Nm |
| Tightening torque max |
0.6 Nm |
Standards and Regulations
| Rail applications |
EN 50121-4 |
| EN 50121-3-2 |
| Standard – Limitation of mains harmonic currents |
EN 61000-3-2 |
| Standard – Electrical safety |
IEC 61010-2-201 (SELV) |
| Standard – Equipment safety |
BG (design tested) |
| Standard – Approval for medical use |
IEC 60601-1, 2 x MOOP |
| Standard – Protection against shock currents, basic requirements for protective separation in electrical equipment |
EN 50178 |
| Standard – Safety extra-low voltage |
IEC 61010-1 (SELV) |
| IEC 61010-2-201 (PELV) |
| Standard – Safe isolation |
IEC 61010-2-201 |
| Standard – safety for equipment for measurement, control, and laboratory use |
IEC 61010-1 |
| Approval – requirement of the semiconductor industry with regard to mains voltage dips |
Semi F47-0706 |
| Overvoltage category |
| EN 62477-1 |
III |
Conformance/Approvals
| CSA |
CAN/CSA-C22.2 No. 60950-1-07 |
| CSA-C22.2 No. 107.1-01 |
| UL approvals |
UL Listed UL 508 |
| UL/C-UL Recognized UL 60950-1 |
| UL ANSI/ISA-12.12.01 Class I, Division 2, Groups A, B, C, D (Hazardous Location) |
EMC Data
| ow Voltage Directive |
Conformance with Low Voltage Directive 2014/35/EC |
| Electromagnetic compatibility |
Conformance with EMC Directive 2014/30/EU |
| EMC requirements for noise emission |
EN 61000-6-3 |
| EN 61000-6-4 |
| EMC requirements for noise immunity |
EN 61000-6-1 |
| EN 61000-6-2 |
| Noise emission |
EN 55011 (EN 55022) |
| Noise immunity |
EN 61000-6-2 |
| Electrostatic discharge |
| Standards/regulations |
EN 61000-4-2 |
| Electrostatic discharge |
| Contact discharge |
8 kV (Test Level 4) |
| Discharge in air |
15 kV (Test Level 4) |
| Comments |
Criterion A |
| Electromagnetic HF field |
| Standards/regulations |
EN 61000-4-3 |
| Electromagnetic HF field |
| Frequency range |
80 MHz … 1 GHz |
| Test field strength |
20 V/m (Test Level 3) |
| Frequency range |
1 GHz … 2 GHz |
| Test field strength |
10 V/m (Test Level 3) |
| Frequency range |
2 GHz … 3 GHz |
| Test field strength |
10 V/m (Test Level 3) |
| Comments |
Criterion A |
| Fast transients (burst) |
| Standards/regulations |
EN 61000-4-4 |
| Fast transients (burst) |
| Input |
4 kV (Test Level 4 – asymmetrical) |
| Output |
2 kV (Test Level 3 – asymmetrical) |
| Signal |
2 kV (Test Level 4 – asymmetrical) |
| Comments |
Criterion A |
| Surge voltage load (surge) |
| Standards/regulations |
EN 61000-4-5 |
| Input |
2 kV (Test Level 3 – symmetrical) |
| 4 kV (Test Level 4 – asymmetrical) |
| Output |
1 kV (Test Level 2 – symmetrical) |
| 2 kV (Test Level 3 – asymmetrical) |
| Signal |
1 kV (Test Level 2 – asymmetrical) |
| Comments |
Criterion A |
| Conducted interference |
| Standards/regulations |
EN 61000-4-6 |
| Conducted interference |
| I/O/S |
asymmetrical |
| Frequency range |
0.15 MHz … 80 MHz |
| Comments |
Criterion A |
| Voltage |
10 V (Test Level 3) |
| Emitted interference |
| Standards/regulations |
EN 61000-6-3 |
| Radio interference voltage in acc. with EN 55011 |
EN 55011 (EN 55022) Class B, area of application: Industry and residential |
| Emitted radio interference in acc. with EN 55011 |
EN 55011 (EN 55022) Class B, area of application: Industry and residential |
| Criterion A |
Normal operating behavior within the specified limits. |
| Criterion B |
Temporary impairment to operational behavior that is corrected by the device itself. |
Environmental Product Compliance
| REACh SVHC |
Lead 7439-92-1 |
| China RoHS |
Environmentally Friendly Use Period = 25; |
| For information on hazardous substances, refer to the manufacturer’s declaration available under “Downloads” |
