Inosaki is one of the largest Phoenix Contact Distributors to provide terminal block, interface module, power supply and relay. And our best offer for terminal block types are Feed-through, Fuse Modular, Spring Cage, Double Level, and Multi-level, hence the series model references to PT Series, ST Series, TB Series, UT Series, UK Series. In additional for power supply are QUINT Power, STEP Power, Trio Power, and UNO Power. Please email us for catalog: sales@inosaki.my
Product Description
QUINT POWER power supplies with maximum functionality
QUINT POWER circuit breakers magnetically and therefore quickly trip at six times the nominal current, for selective and therefore cost-effective system protection. The high level of system availability is additionally ensured, thanks to preventive function monitoring, as it reports critical operating states before errors occur.
Reliable starting of heavy loads takes place via the static power reserve POWER BOOST. Thanks to the adjustable voltage, all ranges between 5 V DC … 56 V DC are covered.
Dimensions
Width |
60 mm |
Height |
130 mm |
Depth |
125 mm |
Installation dimensions |
Installation distance right/left |
5 mm / 5 mm |
Installation distance top/bottom |
50 mm / 50 mm |
Ambient Conditions
Degree of protection |
IP20 |
Ambient temperature (operation) |
-25 °C … 70 °C (> 60 °C Derating: 2,5 %/K) |
Ambient temperature (storage/transport) |
-40 °C … 85 °C |
Ambient temperature (start-up type tested) |
-40 °C |
Maximum altitude |
5000 m |
Climatic class |
3K3 (in acc. with EN 60721) |
Max. permissible relative humidity (operation) |
≤ 95 % (at 25 °C, non-condensing) |
Shock |
18 ms, 30g, in each space direction (according to IEC 60068-2-27) |
Vibration (operation) |
< 15 Hz, amplitude ±2.5 mm (according to IEC 60068-2-6) |
15 Hz … 150 Hz, 2.3g, 90 min. |
Input Data
Nominal input voltage range |
100 V AC … 240 V AC |
110 V DC … 250 V DC |
Input voltage range |
85 V AC … 264 V AC |
110 V DC … 350 V DC (typ. 90 V DC (UL 508: ≤ 300 V DC)) |
Input voltage range AC |
85 V AC … 264 V AC |
Input voltage range DC |
90 V DC … 350 V DC (UL 508: ≤ 300 V DC) |
Electric strength, max. |
300 V AC |
Voltage type of supply voltage |
AC/DC |
Inrush current |
< 15 A |
Inrush current integral (I2t) |
< 1.5 A2s |
AC frequency range |
45 Hz … 65 Hz |
Frequency range DC |
0 Hz |
Mains buffering time |
> 36 ms (120 V AC) |
> 36 ms (230 V AC) |
Current consumption |
2.2 A (120 V AC) |
1.3 A (230 V AC) |
2.5 A (110 V DC) |
1.2 A (220 V DC) |
Nominal power consumption |
302 VA |
Protective circuit |
Transient surge protection; Varistor, gas-filled surge arrester |
Power factor (cos phi) |
0.85 |
Typical response time |
< 0.15 s |
Input fuse |
10 A (slow-blow, internal) |
Permissible backup fuse |
B10 B16 AC: |
Permissible DC backup fuse |
DC: Connect a suitable fuse upstream |
Recommended breaker for input protection |
10 A … 20 A (AC: Characteristics B, C, D, K) |
Discharge current to PE |
< 3.5 mA |
Output Data
Efficiency |
> 92.5 % (for 230 V AC and nominal values) |
Output characteristic |
U/I |
Nominal output voltage |
24 V DC ±1 % |
Setting range of the output voltage (USet) |
18 V DC … 29.5 V DC (> 24 V DC, constant capacity restricted) |
Nominal output current (IN) |
10 A (-25 °C … 60 °C, UOUT = 24 V DC) |
POWER BOOST (IBoost) |
15 A (-25 °C … 40 °C permanent, UOUT = 24 V DC ) |
Selective Fuse Breaking (ISFB) |
60 A (12 ms) |
Magnetic circuit breaker tripping |
B2 / B4 / B6 / C2 / C4 |
Derating |
60 °C … 70 °C (2.5%/K) |
Feedback voltage resistance |
≤ 35 V DC |
Protection against overvoltage at the output (OVP) |
≤ 35 V DC |
Control deviation |
< 1 % (change in load, static 10 % … 90 %) |
< 2 % (change in load, dynamic 10 % … 90 %) |
< 0.1 % (change in input voltage ±10 %) |
Residual ripple |
< 50 mVPP (with nominal values) |
Short-circuit-proof |
yes |
Output power |
240 W |
Maximum no-load power dissipation |
9.1 W |
Power loss nominal load max. |
22 W |
Rise time |
< 0.05 s (UOUT (10 % … 90 %)) |
Connection in parallel |
yes, for redundancy and increased capacity |
Connection in series |
yes |
Commercial Data
Item number |
2866763 |
Packing unit |
1 pc |
Minimum order quantity |
1 pc |
Sales Key |
C14 |
Product Key |
CMPQ13 |
Catalog Page |
Page 159 (C-6-2015) |
GTIN |
4046356113793 |
Weight per Piece (including packing) |
1,494 g |
Weight per Piece (excluding packing) |
1,100 g |
Customs tariff number |
85044030 |
Country of origin |
TH |
Connection Data, Input
Connection method |
Screw connection |
Conductor cross section solid min. |
0.2 mm² |
Conductor cross section solid max. |
2.5 mm² |
Conductor cross section flexible min. |
0.2 mm² |
Conductor cross section flexible max. |
2.5 mm² |
Conductor cross section AWG min. |
16 |
Conductor cross section AWG max. |
12 |
Stripping length |
7 mm |
Screw thread |
M3 |
Tightening torque, min |
0.5 Nm |
Tightening torque max |
0.6 Nm |
Connection Data, Output
Connection method |
Screw connection |
Conductor cross section solid min. |
0.2 mm² |
Conductor cross section solid max. |
2.5 mm² |
Conductor cross section flexible min. |
0.2 mm² |
Conductor cross section flexible max. |
2.5 mm² |
Conductor cross section AWG min. |
16 |
Conductor cross section AWG max. |
12 |
Stripping length |
7 mm |
Screw thread |
M3 |
Tightening torque, min |
0.5 Nm |
Tightening torque max |
0.6 Nm |
Connection Data, Signal
Connection method |
Screw connection |
Conductor cross section solid min. |
0.2 mm² |
Conductor cross section solid max. |
2.5 mm² |
Conductor cross section flexible min. |
0.2 mm² |
Conductor cross section flexible max. |
2.5 mm² |
Conductor cross section AWG min. |
16 |
Conductor cross section AWG max. |
12 |
Screw thread |
M3 |
Tightening torque, min |
0.5 Nm |
Tightening torque max |
0.6 Nm |
Standards and Regulations
Rail applications |
EN 50121-4 |
EN 50121-3-2 |
HART FSK Physical Layer Test Specification Compliance |
Output voltage UOut compliant |
Standard – Limitation of mains harmonic currents |
EN 61000-3-2 |
Standard – Electrical safety |
IEC 61010-2-201 (SELV) |
Standard – Equipment safety |
BG (design tested) |
Standard – Approval for medical use |
IEC 60601-1, 2 x MOOP |
Standard – Safety extra-low voltage |
IEC 61010-1 (SELV) |
IEC 61010-2-201 (PELV) |
Standard – Safe isolation |
IEC 61010-2-201 |
Standard – safety for equipment for measurement, control, and laboratory use |
IEC 61010-1 |
Approval – requirement of the semiconductor industry with regard to mains voltage dips |
SEMI F47-0706 Compliance Certificate |
DeviceNet approval |
DeviceNet™ Power Supply Conformance Tested |
Overvoltage category |
EN 62477-1 |
III |
Conformance/Approvals
CSA |
CAN/CSA-C22.2 No. 60950-1-07 |
CSA-C22.2 No. 107.1-01 |
Shipbuilding approval |
DNV GL (EMC B), ABS, LR, RINA, NK, BV |
SIQ |
BG (type approved) |
UL approvals |
UL Listed UL 508 |
UL/C-UL Recognized UL 60950-1 |
UL ANSI/ISA-12.12.01 Class I, Division 2, Groups A, B, C, D (Hazardous Location) |
DeviceNet approval |
DeviceNet™ Power Supply Conformance Tested |
EMC Data
Low Voltage Directive |
Conformance with Low Voltage Directive 2014/35/EC |
Electromagnetic compatibility |
Conformance with EMC Directive 2014/30/EU |
EMC requirements for noise emission |
EN 61000-6-3 |
EN 61000-6-4 |
EMC requirements for noise immunity |
EN 61000-6-1 |
EN 61000-6-2 |
Noise immunity |
EN 61000-6-2 |
Electrostatic discharge |
Standards/regulations |
EN 61000-4-2 |
Electrostatic discharge |
Contact discharge |
8 kV (Test Level 4) |
Discharge in air |
15 kV (Test Level 4) |
Comments |
Criterion A |
Electromagnetic HF field |
Standards/regulations |
EN 61000-4-3 |
Electromagnetic HF field |
Frequency range |
80 MHz … 1 GHz |
Test field strength |
20 V/m (Test Level 3) |
Frequency range |
1 GHz … 2 GHz |
Test field strength |
10 V/m (Test Level 3) |
Frequency range |
2 GHz … 3 GHz |
Test field strength |
10 V/m (Test Level 3) |
Comments |
Criterion A |
Fast transients (burst) |
Standards/regulations |
EN 61000-4-4 |
Fast transients (burst) |
Input |
4 kV (Test Level 4 – asymmetrical) |
Output |
2 kV (Test Level 3 – asymmetrical) |
Signal |
2 kV (Test Level 4 – asymmetrical) |
Comments |
Criterion A |
Surge voltage load (surge) |
Standards/regulations |
EN 61000-4-5 |
Input |
2 kV (Test Level 3 – symmetrical) |
4 kV (Test Level 4 – asymmetrical) |
Output |
1 kV (Test Level 2 – symmetrical) |
2 kV (Test Level 3 – asymmetrical) |
Signal |
1 kV (Test Level 2 – asymmetrical) |
Comments |
Criterion B |
Conducted interference |
Standards/regulations |
EN 61000-4-6 |
Conducted interference |
I/O/S |
asymmetrical |
Frequency range |
0.15 MHz … 80 MHz |
Comments |
Criterion A |
Voltage |
10 V (Test Level 3) |
Emitted interference |
Standards/regulations |
EN 61000-6-3 |
Radio interference voltage in acc. with EN 55011 |
EN 55011 (EN 55022) Class B, area of application: Industry and residential |
Emitted radio interference in acc. with EN 55011 |
EN 55011 (EN 55022) Class B, area of application: Industry and residential |
Criteria |
Criterion A |
Normal operating behavior within the specified limits. |
Criterion B |
Temporary impairment to operational behavior that is corrected by the device itself. |
Environmental Product Compliance
REACh SVHC |
Lead 7439-92-1 |
|
China RoHS |
Environmentally Friendly Use Period = 25; |
For information on hazardous substances, refer to the manufacturer’s declaration available under “Downloads” |