This device is a flush-mount energy meter with a 96mm by 96mm backlit LCD display. The meter provides Class 0.5S accuracy per IEC 62053-22 standard and 64 samples per cycle. The meter will measure Energy, Active and Reactive Power, Voltage, Current, Frequency, Power Factor and up to 31th Harmonic. Include a non-volatile memory for several parameters and alarms. The meter will function in a 50Hz or 60Hz network and accepts supply voltage ranging from 85 to 265 VAC and 100 to 300 VDC. Line rated current for this meter is 1A or 5A input and will support Single Phase and Neutral, Three Phase, or Three Phase and Neutral configurations. The range of measurement voltage between Phases is 20V AC to 480V AC, CAT III or 20V AC to 690V AC, CAT II at 45 Hz to 65 Hz. The range of measurement voltage between Phase and Neutral is 20V AC to 277V AC, CAT III or 20V AC to 400V AC, CAT II at 45 Hz to 65 Hz. Communication protocol is Modbus RTU and ASCII 2 wires with RS485 port support. The meter also has four digital inputs and dual relay outputs. Product dimensions are as follows: width 3.78 inches (96 millimetres), depth 2.24 inches (57 millimetres), height 3.78 inches (96 millimetres) and product weight 8.8 onces (250 g).

Specifications

Main
Part Number	METSEPM5350P
Range	PowerLogic
Product name	PowerLogic PM5350
Device short name	PM5350P
Product or component type	Power meter
Complementary
power quality analysis	Total demand distortion
	total harmonic distortion
	up to the 31st harmonic
Device application	Multi-tariff
Device application	Power monitoring
type of measurement	Current
	Voltage
	Frequency
	Power factor
	Energy
	Phase angle
	Apparent power
	Active power
	Reactive power
	Individual harmonics up to the 31st
supply voltage	85…265 V AC 45…65 Hz
supply voltage	100…300 V DC
Network frequency	50 Hz
Network frequency	60 Hz
[In] rated current	1:00 AM
[In] rated current	5:00 AM
type of network	3P + N
	3P
	1P + N
power consumption in W	4 W at 125 V DC
	5 W at 300 V DC
	4 W at 120 V AC
	5 W at 230 V AC
power consumption in VA	7 VA at 120 V AC
	9 VA at 230 V AC
	11.9 VA at 265 V AC
Display type	LCD screen with white backlighting
Display colour	Monochrome
Display resolution	128 x 128 pixels
Sampling rate	64 samples/cycle
Measurement current	1:00 AM
Measurement current	5:00 AM
analogue input type	Current 0.05…9 A (impedance <= 0.3 mOhm)
measurement voltage	20…700 V AC 45…70 Hz phase to phase
measurement voltage	20…404 V AC 45…70 Hz phase to neutral
Frequency measurement range	45…70 Hz
measurement accuracy	Current 0.5 %
	Voltage 0.5 %
	Frequency 0.05 %
	Power factor 0,01
accuracy class	Class 0.5S active energy conforming to IEC 62053-22
	Class 0.5 active energy conforming to IEC 61557-12
	Class 2 reactive energy conforming to IEC 62053-23
	Class 2 reactive energy conforming to IEC 61557-12
	Class 0.5 power conforming to IEC 61557-12
	Class 5 harmonic distorsion (I THD & U THD) conforming to IEC 61557-12
	Class 5 individual harmonics up to the 15th conforming to IEC 61557-12
number of digital inputs	4 digital
digital input voltage rating	Discrete input: 18.5…36 V DC 2 Hz 110 kOhm
number of digital outputs	2 relay
number of digital outputs	1 pulse
maximum switching current	Relay outputs 2 A at 250 V AC inductive load, cos phi = 0.4
multi-tariff	Tariff (4)
communication port protocol	JBUS
communication port protocol	Modbus RTU and ASCII at 9.6, 19.2 and 38.4 kbauds even/odd or none – 2-wire, insulation 2500 V
communication port support	Terminal block: RS485
realtime clock	Built-in battery (3 years), drift: +/- 0.5 s/day
Data recording	Min/max of instantaneous values
Data recording	Alarms
Web services	Upgrade drive firmware
Mounting mode	Flush-mounted
Type of installation	Indoor installation
Standards	IEC 61010-1
	IEC 61557-12
	IEC 62052-11
	IEC 62053-22
product certifications	CE conforming to IEC 61010-1
	CULus conforming to CSA C22.2 No 61010-1
	UL conforming to UL 61010-1
Width	96 mm
depth	44 mm embedded:
	13 mm outside:
	57 mm total:
Height	96 mm
Product weight	0.25 kg
Environment
electromagnetic compatibility	Limitation of voltage changes, voltage fluctuations and flicker in low-voltage conforming to IEC 61000-3-3
	Electrostatic discharge conforming to IEC 61000-4-2
	Electrical fast transient/burst immunity test conforming to IEC 61000-4-4
	1.2/50 µs shock waves immunity test conforming to IEC 61000-4-5
	Conducted RF disturbances conforming to IEC 61000-4-6
	Immunity to magnetic fields conforming to IEC 61000-4-8
	Immunity to voltage dips conforming to IEC 61000-4-11
	Conducted and radiated emissions class A conforming to EN 55011
	Limits for harmonic current emissions conforming to IEC 61000-3-2
	Radiated radio-frequency electromagnetic field immunity test conforming to IEC 61000-4-3
Electrical insulation class	Double insulation
Electrical insulation class	Class II
measurement category	Category III 480 V conforming to IEC 61010-1
	Category III 300 V conforming to UL 61010-1
	Category III 300 V conforming to CSA C22.2 No 61010-1
	Category II 690 V conforming to IEC 61010-1
Overvoltage category	III
IP degree of protection	IP30 back: conforming to IEC 60529
IP degree of protection	IP51 front face: conforming to IEC 60529
relative humidity	5…95 % at 50 °C non-condensing
pollution degree	2
ambient air temperature for operation	-25…70 °C
	-20…70 °C at for display module
	-25…20 °C at with derating
Ambient air temperature for storage	-40…85 °C
Operating altitude	0…3000 m
Packing Units
Unit Type of Package 1	PCE
Number of Units in Package 1	1
Package 1 Height	11.077 cm
Package 1 Width	12.447 cm
Package 1 Length	12.715 cm
Package 1 Weight	410.0 g
Unit Type of Package 2	S03
Number of Units in Package 2	12
Package 2 Height	30.0 cm
Package 2 Width	30.0 cm
Package 2 Length	40.0 cm
Package 2 Weight	5.571 kg