PLC-RSC- 24DC/21 – 2966171 – Relay Module – Phoenix Contact Solid-state Solid-state Relays And Electromechanical Relays
USD $ 22.08
SKU: Phoenix Contact 2966171
Phoenix Contact develops terminal blocks, power supplies, relays, connectors, signal conditioners, controllers & PLCs, I/O systems, Industrial Ethernet, controller system cabling, PCB terminal blocks & connectors, and surge suppression.
Commercial Data
Item number | 2966171 |
Packing unit | 10 pc |
Minimum order quantity | 1 pc |
Sales Key | 08 |
Product Key | CK621A |
Catalog Page | Page 364 (C-5-2019) |
GTIN | 4017918130732 |
Weight per Piece (including packing) | 40.29 g |
Weight per Piece (excluding packing) | 31.06 g |
Customs tariff number | 85364190 |
Country of origin | DE |
Input Data
Coil side | |
Nominal input voltage UN | 24 V DC |
Input voltage range | 18.5 V DC … 33.6 V DC (20 °C) |
Typical input current at UN | 9 mA |
Typical response time | 5 ms |
Typical release time | 8 ms |
Protective circuit | Reverse polarity protection; Polarity protection diode |
Freewheeling diode; Freewheeling diode | |
Operating voltage display | Yellow LED |
Output Data
Switching | |
Contact type | 1 changeover contact |
Type of switch contact | Single contact |
Drive and function | monostable |
Drive (polarity) | polarized |
Type of contact | Power contact |
Contact material | AgSnO |
Maximum switching voltage | 250 V AC/DC (The separating plate PLC-ATP should be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal blocks in adjacent modules. Potential bridging is then carried out with FBST 8-PLC… or …FBST 500…) |
Minimum switching voltage | 5 V (100 mA) |
Limiting continuous current | 6 A |
Maximum inrush current | 10 A (4 s) |
Min. switching current | 10 mA (12 V) |
Interrupting rating (ohmic load) max. | 140 W (at 24 V DC) |
20 W (at 48 V DC) | |
18 W (at 60 V DC) | |
23 W (at 110 V DC) | |
40 W (at 220 V DC) | |
1500 VA (for 250 V AC) | |
Switching capacity | 2 A (at 24 V, DC13) |
0.2 A (at 110 V, DC13) | |
0.1 A (at 220 V, DC13) | |
3 A (at 24 V, AC15) | |
3 A (at 120 V, AC15) | |
3 A (at 230 V, AC15) |
Connection Data
Connection method | Screw connection |
Stripping length | 8 mm |
Screw thread | M3 |
Conductor cross section rigid | 0.14 mm² … 2.5 mm² |
Conductor cross section flexible | 0.14 mm² … 2.5 mm² |
0.2 mm² … 2.5 mm² (Single ferrule) | |
2x 0.5 mm² … 1.5 mm² (TWIN ferrule) | |
Conductor cross section AWG | 26 … 14 |
Tightening torque | 0.6 Nm … 0.8 Nm |
Dimensions
Width | 6.2 mm |
Height | 80 mm |
Depth | 94 mm |
Ambient conditions
Degree of protection (Relay) | RT III (Relay) |
Degree of protection (Relay base) | IP20 (Relay base) |
Degree of protection (Installation location) | ≥ IP54 (Installation location) |
Ambient temperature (operation) | -40 °C … 70 °C (see to derating) |
Ambient temperature (storage/transport) | -40 °C … 85 °C |
Approvals
Corrosive gas test | |
Identification | ISA-S71.04. G3 Harsh Group |
EN 60068-2-60 |
Standards and Regulations
Standards/regulations | IEC 60947-5-1 |
Mounting
Mounting type | DIN rail mounting |
Assembly instructions | in rows with zero spacing |
Mounting position | any |
Weight | 0.04029 kg |
---|---|
Dimensions | 9.40 × 0.62 × 8.00 cm |
Related products
-
Select options This product has multiple variants. The options may be chosen on the product page Details
-
Select options This product has multiple variants. The options may be chosen on the product page Details