Open Type – Linear Bushing – LM-OP – THK

$ 9.46$ 65.78

SKU: N/A

Specification

Model No. Ball rows Main dimensions Eccentricity(max) Radialclearancetolerance Basic load rating Mass
Inscribed bore diameter Outer diameter Length L1 Tolerance L2 D0 h1 θ° Dynamic
rating
C
Static
rating
C0
dr Tolerance D Tolerance L Tolerance
mm mm mm mm mm mm mm mm mm mm mm µm µm N N g
LM12‑OP 4 12 0-0.009 21 0-0.013 30 0-0.2 23 0-0.2 1.3 20 8 80 12 -5 412 598 31.5
LM13‑OP 4 13 23 32 23 1.3 22 9 80 12 -7 510 775 43
LM16‑OP 5 16 28 37 26.5 1.6 27 11 60 12 -7 775 1180 69
LM20‑OP 5 20 0-0.010 32 0-0.016 42 30.5 1.6 30.5 11 60 15 -9 863 1370 87
LM25‑OP 6 25 40 59 0-0.3 41 0-0.3 1.85 38 12 50 15 -9 980 1570 220
LM30‑OP 6 30 45 64 44.5 1.85 43 15 50 15 -9 1570 2750 250
LM35‑OP 6 35 0-0.012 52 0-0.019 70 49.5 2.1 49 17 50 20 -13 1670 3140 390
LM40‑OP 6 40 60 80 60.5 2.1 57 20 50 20 -13 2160 4020 585
LM50‑OP 6 50 80 0-0.022 100 74 2.6 76.5 25 50 20 -13 3820 7940 1580
LM60‑OP 6 60 0-0.015 90 110 85 3.15 86.5 30 50 25 -16 4710 10000 2000

 

Model Number Coding

Model Nominal shaft diameter (mm) Retainer material Seals Type
LM 12 GA OP
LM 12~60 No symbol : Resin*1 No symbol: No seals OP: Open type
GA (A for size 120) : Metal UU : Ends seals

 

Note 1: Since this model contains a synthetic resin retainer, do not use in environments exceeding 80°C. If ambient temperature is to exceed 80°C, use the type equipped with a metal retainer (model LM-GA).

Dimensions N/A
Inner dia mm

13, 16, 20, 25, 30, 35, 40, 50, 60

Outer Dia mm

23, 28, 32, 40, 45, 52, 60, 80, 90

Length mm

100, 110, 32, 37, 42, 59, 64, 70, 80

Related products