Omron E3ZG-LS61-LO-T NPN Light-ON TOF Laser Sensor

USD 40.41

Omron E3ZG-LS61-LO-T is a teaching-type NPN Light-ON TOF sensor with 50–900 mm range, 940 nm Class 1 laser and IP65 protection.

SKU Omron-E3ZG-LS61-LO-T Category
Top Brands > Omron > Omron Photoelectric Sensors

Omron E3ZG-LS61-LO-T Time-of-Flight Laser Photoelectric Sensor

BrandOmron
Model IdentifierE3ZG-LS61-LO-T
Official Part NumberE3ZG-LS61-LO-T

Technical Overview

The Omron E3ZG-LS61-LO-T is a teaching-type time-of-flight laser photoelectric sensor with a 50–900 mm sensing range and NPN Light-ON output. The manufacturer instruction sheet specifies a 940 nm infrared laser, 12–24 VDC supply, 100 ms maximum operate/reset response and an IP65 enclosure. Current supply status is not established by the consulted manufacturer material and is recorded as Unknown.

A teaching-type 50–900 mm NPN Light-ON TOF laser sensor with 940 nm Class 1 source and IP65 protection.

Key Features

  • Exact model E3ZG-LS61-LO-T; one-point teaching type
  • 50–900 mm sensing range
  • NPN open-collector output with Light-ON operation
  • 940 nm infrared laser, IEC Class 1
  • 12–24 VDC ±10% supply; 480 mW maximum power consumption
  • 100 ms maximum operate/reset response
  • IP65 protection; 2 m pre-wired cable
  • 31 × 20 × 10.8 mm sensor dimensions
  • Current manufacturer supply status is not established; recorded as Unknown

Teach a sensing threshold across the specified 50–900 mm range.

Technical Specification Matrix

ParameterValue
Sensor typeTeaching-type time-of-flight laser photoelectric sensor
Sensing distance50–900 mm
OutputNPN open-collector; Light-ON
Light source940 nm infrared laser; IEC Class 1
Supply voltage12–24 VDC ±10%
Power consumption480 mW maximum (20 mA maximum at 24 VDC)
Control outputLoad supply 26.4 VDC maximum; load current 100 mA maximum
Response timeOperate/reset: 100 ms maximum
Operating / storage temperature−20 to 50 °C / −40 to 70 °C (no icing or condensation)
Ambient humidityOperating 35–85% RH; storage 35–95% RH
ProtectionIP65
Connection3-core pre-wired cable, standard length 2 m
Physical Weight (kg)Not stated in consulted exact-model manufacturer source
Dimensions L x W x H (cm)3.1 x 2.0 x 1.08
Supply statusUnknown; current manufacturer lifecycle state not established

Suggested applications

Engineering suggestions require suitability checks for your installation.

1. Conveyor distance-zone detection

Packages on a conveyor may vary in height or position, complicating fixed-distance photoelectric detection.

Potential use

The teaching function allows a threshold to be set at the target position; validate sensing performance against target material and installation geometry.

50–900 mm TOF NPN Light-ON

2. Position verification at handling stations

A handling station may need a discrete signal when a workpiece reaches a defined position.

Potential use

The NPN Dark-ON output can signal a compatible control input after teaching the intended distance and confirming response-time suitability.

940 nm Class 1 100 ms max 2 m cable IP65
Select your currency