SICK 6049579 OD5-150T40 RS-422 Laser Displacement Head

USD 517.92

110–190 mm laser displacement head with RS-422, 658 nm class 2 red laser, 0.5 m Hirose 12-pin cable, IP67 housing and optional AOD5 evaluation.

SKU SICK-6049579 Category
Laser Distance Sensors - SICK OD Precision

SICK OD5-150T40 RS-422 Laser Displacement Head

BrandSICK
Model IdentifierOD5-150T40
Official Part Number6049579

Technical Overview

The SICK OD5-150T40 is an OD Precision laser displacement head with direct RS-422 communication and a 110–190 mm range at default settings on 6–90% remission targets. Its 658 nm class 2 red laser produces a typical 180 µm spot at 150 mm. Repeatability is 2 µm and linearity is ±40 µm on 90% remission white ceramic, with 256 averages and constant ambient conditions. Internal measuring frequency is up to 10 kHz under the stated conditions. The head operates directly through RS-422 or with a compatible separate AOD5 evaluation unit for optional outputs and display. An IP67 aluminum housing, glass window and 0.5 m Hirose 12-pin connector cable support integration.

110–190 mm RS-422 laser displacement head with class 2 red laser, IP67 aluminum housing and a 0.5 m Hirose 12-pin cable; optional outputs require separate AOD5.

Key Features

  • 110–190 mm range at default settings on6–90%remission targets
  • Native RS-422;stand-alone serial use or separate compatible AOD5
  • 658 nm class2 red laser;maximum optical output1 mW
  • Typical180 µm light spot at150 mm
  • Repeatability2 µm and linearity±40 µm on90%white ceramic,256 averages,constant ambient
  • Internal measuring frequency≤10 kHz at default settings on6–90%remission
  • Response≥0.1 ms;automatic sensitivity adjustment uses20 sampling periods
  • Laser-off input and distance/laser LEDs on the head
  • Optional analog/digital outputs and4-inch display through separate AOD5 only
  • IP67 aluminum housing,glass window and0.5 m Hirose12-pin connector cable

Read displacement directly through RS-422, or add a compatible separate AOD5 evaluation unit for optional process outputs and a color display.

Technical Specification Matrix

ParameterValue
System partLaser displacement sensor head
Measuring range110–190 mm;6–90%remission at default settings
Repeatability2 µm;90%remission white ceramic,256 averages,constant ambient conditions
Linearity±40 µm;90%remission white ceramic,256 averages,constant ambient conditions
Light sourceVisible red laser
Wavelength658 nm
Laser class2;IEC60825-1:2014 and EN60825-1:2014
Maximum optical output1 mW
Laser handlingDo not intentionally look into the beam or point it at eyes
Light spot sizeTypicalØ180 µm at150 mm
Response time≥0.1 ms;default sampling period0.1 ms;automatic sensitivity adjustment requires20 sampling periods
Automatic sensitivity adjustmentSampling period×20;≤2 ms at default100 µs period
Measuring frequency≤10 kHz;6–90%remission at default settings
Output time≥0.1 ms
Serial interfaceRS-422;stand-alone operation supported
Optional evaluation unitSeparate AOD5-P/N1;OD5-150xxx compatibility stated for AOD5 hardware1.7/software4.3,corresponding to production fromLot1338
Optional RS-232Available through separate AOD5 only
Optional digital outputs5 PNP/NPN outputs through separate AOD5 only;maximum output current≤100 mA
Optional analog outputsThrough separate AOD5 only;up to three current and three voltage outputs
Optional current-output range4–20 mA;load≤300 Ω;through separate AOD5 only
Optional voltage-output range0–10 V;output resistance100 Ω;minimum load10 kΩ;through separate AOD5 only
Laser-off inputOne;pin12/WH
Synchronization connectionPin11/GY,Syncro
Power supply12 V DC−5% to24 V DC+10%
Warm-up time≤5 min
Head indicatorsDistance LED and laser-on LED
Optional display4-inch color display on separate evaluation unit
Protection classIII
Connection0.5 m cable with Hirose12-pin male connector
Cable diameter7.1 mm
Pin assignment1=not assigned;2/BK=RX+;3/OR=RX−;4/BU=M;5/BN=L+;6/RD=TX+;7/YE=TX−;8=not assigned;9/BK=shield;10=not assigned;11/GY=Syncro;12/WH=laser off
Housing materialAluminum
Window materialGlass
IP ratingIP67
Operating temperature−10 to+50 °C
Storage temperature−20 to+60 °C
Relative humidity35–85%;non-condensing
Temperature drift±0.01%FS/K;FS=full sensor measuring range
Ambient light immunityTypical artificial light≤3,000 lx;sunlight≤10,000 lx
Vibration resistance10–55 Hz,1.5 mm amplitude;X/Y/Z axes2 hours each
Shock resistance50 g;X/Y/Z axes3 times each
MTTFD101 years
Diagnostic coverage DCavg0%
Physical Weight (kg)0.25

Industrial Applications

1. Checking part seating displacement through RS-422

A fixture can present a part surface within the 110–190 mm measuring range while an external RS-422 host reads its displacement. The host compares the measurement with a calibrated seating-height reference and stores the result. Actual reflectivity, warm-up, averaging and ambient conditions are included in setup; the stated2 µm repeatability is conditioned on white ceramic,256 averages and constant ambient conditions.

Problem Solved

A numerical displacement value lets external control evaluate seating deviation and retain an inspection record, while the measurement head remains separate from optional output hardware.

RS-422 External height comparison Conditioned repeatability

2. Recording radial runout for external analysis

A rotating component can move its accessible surface beneath the laser while an external recorder collects RS-422 distance values and associates them with time or rotation angle. Cyclic displacement is derived from that trace. The configured sampling period, sensitivity adjustment, averaging and serial transfer determine usable acquisition behavior; the internal10 kHz measuring capability is not assumed to guarantee every value reaches the host.

Problem Solved

A recorded numerical trace helps external analysis separate cyclic runout from a fixed mounting offset, supporting comparison between component and machine setup conditions.

Serial trace External runout analysis Sampling conditions

3. Monitoring stack-height trend for replenishment

A feeder can aim the head at a stack top inside the 110–190 mm range and transmit distance to an RS-422 host. External logic converts the distance to its calibrated remaining-height reference and requests replenishment at the chosen level. The actual target return must satisfy the measuring conditions, with warm-up and averaging selected for the required update behavior.

Problem Solved

Continuous distance values support both an external replenishment threshold and a remaining-height trend, allowing the feeder controller to follow consumption between discrete refill events.

RS-422 Stack-height trend External replenishment
Select your currency