SICK 6054082 OD1-B015H05A15 RS-485 Laser Displacement Head

USD 1,504.62

10–20 mm class 1 laser head with RS-485, four-digit display, 0.3 m M12 five-pin cable, IP67 stainless housing and optional AOD1 evaluation.

SKU SICK-6054082 Category
Laser Distance Sensors - SICK OD Mini

SICK OD1-B015H05A15 RS-485 Laser Displacement Head

BrandSICK
Model IdentifierOD1-B015H05A15
Official Part Number6054082

Technical Overview

The SICK OD1-B015H05A15 is an OD Mini laser displacement head with a 10–20 mm measuring range and direct RS-485 communication. It can operate through that serial interface or with a separate AOD1 evaluation unit. Its 655 nm class 1 red laser provides 1 µm repeatability at 512 averages and constant ambient conditions, with ±10 µm linearity on a 90% remission white ceramic target. Averaging from 1–512 measurements and automatic or manual sensitivity support setup. A four-digit display and four buttons provide local adjustment. Analog and switching outputs require the separate AOD1; PROFIBUS DP additionally requires a WI180C-PB gateway. The stainless-steel IP67 head has a 0.3 m M12 five-pin cable.

10–20 mm class 1 laser displacement head with direct RS-485, local display and a 0.3 m M12 five-pin cable; optional outputs require separate AOD1.

Key Features

  • 10–20 mm measuring range
  • Direct RS-485 interface;stand-alone serial use or separate AOD1
  • 655 nm class1 red laser;maximum optical output390 µW
  • Repeatability1 µm at512 averages and constant ambient conditions
  • Linearity±10 µm on90%remission white ceramic
  • Averaging1–512;automatic or manual sensitivity adjustment
  • Optional4–20 mA and1–3 PNP/NPN outputs through separate AOD1 only
  • Optional PROFIBUS DP through separate AOD1 and WI180C-PB gateway
  • Four-digit display,four buttons;warm-up≤5 min
  • IP67 stainless-steel housing;0.3 m M12 five-pin cable

Read displacement directly through RS-485 or integrate the head with a separate AOD1 evaluation unit for optional process outputs.

Technical Specification Matrix

ParameterValue
Measuring range10–20 mm
Light sourceVisible red laser
Wavelength655 nm
Laser class1;IEC60825-1:2014 and EN60825-1:2014
Maximum optical output390 µW
Laser handlingDo not intentionally look into the beam or point it at eyes
Response time≥2 ms with fixed sensitivity and averaging1;automatic sensitivity:2–7.5 ms at500 µs measuring rate,4–15 ms at1,000 µs rate
Measuring frequency≤2 kHz
Output time≥0.5 ms
Averaging1–512 measurements
SensitivityAutomatic or manual adjustment
Power supply12 V DC−5% to24 V DC+10%
Warm-up time≤5 min
DisplayFour-digit seven-segment display plus four status LEDs
ControlsFour buttons
Protection classIII
Connection0.3 m cable with M12 five-pin male connector
Housing materialStainless steel
Window materialPPSU plastic
IP ratingIP67
Operating temperature−10 to+50 °C
Storage temperature−20 to+60 °C
Relative humidity35–95%;non-condensing
Temperature drift±0.08%FS/K;FS=full sensor measuring range
Ambient light immunityTypical artificial light≤3,000 lx;sunlight≤10,000 lx
Vibration resistance10–55 Hz,1.5 mm amplitude;X/Y/Z axes2 hours each
Shock resistance50 g;X/Y/Z axes3 times each
Paint-wetting compatibilityNot free of paint-wetting impairment substances
MTTFD101 years
Diagnostic coverage DCavg0%
Physical Weight (kg)0.07
Repeatability1 µm;averaging512;constant ambient conditions
Linearity±10 µm on90%remission white ceramic
Light spot sizeTypical 700 × 500 µm at 15 mm
Serial interfaceRS-485;direct stand-alone operation supported
Optional evaluation unitSeparate AOD1
Optional analog output1 ×4–20 mA,load≤300 Ω;through separate AOD1 only
Optional digital outputs1–3 PNP/NPN selectable;through separate AOD1 only
Optional fieldbusPROFIBUS DP;requires separate AOD1 and WI180C-PB gateway
Pin assignment1/BN=L+;2/WH=RS-485(B);3/BU=0 V;4/BK=RS-485(A);5/GY=not connected

Industrial Applications

1. Checking seating height through a serial host

A fixture can place a part surface inside the 10–20 mm range while an external host reads displacement through RS-485. The host compares the measured distance with its seating-height window after establishing the mounting reference. The selected averaging, warm-up and actual target response are included in setup; specified repeatability applies at512 averages and constant ambient conditions.

Problem Solved

A numerical serial measurement lets external control evaluate seating deviation and retain the measured value for inspection records, using a direct connection to the sensor head.

RS-485 External height window Displacement record

2. Recording cyclic surface variation over RS-485

A rotating component can pass its accessible surface under the laser while an external recorder collects serial distance values and relates them to elapsed time. The recorder derives cyclic variation within the selected measuring range. Sampling, response, averaging and serial transfer settings determine the usable motion conditions; static averaged repeatability is not a dynamic acquisition guarantee.

Problem Solved

A stored distance trace helps external analysis distinguish cyclic runout from a fixed mounting offset, while preserving numerical values for comparison between setup conditions.

Serial trace External runout analysis Configurable averaging

3. Tracking stacked-part height through serial data

A feeder can aim the laser at a stack top inside the 10–20 mm measuring range and transmit distance to an RS-485 host. External logic converts distance to its calibrated height reference and requests replenishment at a chosen level. Automatic or manual sensitivity and averaging are selected for the actual surface and required update behavior.

Problem Solved

Continuous serial distance values support an external replenishment threshold and a remaining-height trend, giving the host more detail than a single near-empty condition.

RS-485 Stack-height trend External replenishment
Select your currency